Facade ladder for evacuation, ascending to the roof and chimney.

Installed with a bracket depending on the depth of the roof foot. Handrails shall be installed with a bracing kit on facade ladders and on roofs or other permanently installed access device.

Satisfies the requirements set out in SS 831340

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

770 Downloads

Snow fence tube protects your inhabitants from falling snow during the melting season.

 The snow fence satisfies SS 831335

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

1979 Downloads

assign it a rainfall rate, and total surface area (has ability to include vertical surfaces as well)

It will size the pipe dia based on michigan plumbing code

-can be adapted for other states, based on Wade

Based on 1% slope I intend to include rates based on 2% slope at a later date

Product Version: Revit MEP 2009

14301 Downloads

This is a soffit box profile to be used as a Roof Fascia Sweep (use the bottom edge).  Used to finish of the gable end of simple roofs.   You will need to join the sweep to the roof and then use the invisible linework tool to make the box look as one solid surface.  Has parameters for the slope and the overhang. Thanks to dano3d for the slope formula.

Product Version: Revit Architecture 2009

2583 Downloads

Adjustable Radius, Height, Border Wall Height, and Materials

Product Version: Revit Architecture 2011

742 Downloads

Snow fence profile protects your inhabitants from falling snow during the melting season.

 The snow fence satisfies SS 831335

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

964 Downloads

The height, radius, start angle, end angle, border wall height, and materials are adjustable. Adjusting the start and end angles can make the dome a full dome, half dome, quarter dome, etc.

Product Version: Revit Architecture 2011

13899 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

87 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

41 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

65 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

47 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

36 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

92 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

44 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

Product Version: Revit Architecture 2019

44 Downloads

JUAL Outlet with a rectangular pipe and 90° angled flange. The outlet can be supplied in many different standard dimensions with cross sections ranging from 77x56 mm to 500x100 mm and lengths from 400 mm to 1000 mm.

No Rating

Product Version: Revit Architecture 2019

32 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

Product Version: Revit Architecture 2019

71 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

26 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

21 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

17 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

15 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

23 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

19 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

16 Downloads

Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory

No Rating

Product Version: Revit Architecture 2019

32 Downloads

Pitched Roof 4kWp Photovoltaic Panel

4kWp 16 250Wp Panels

For More info contact:

info@evoenergy.co.uk

EvoEnergy Ltd

Product Version: Revit Architecture 2014

10735 Downloads

Roof window

No Rating

Product Version: Revit Architecture 2010

1697 Downloads

MIFAB® Series R1200-RS lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and internal dome strainer.

No Rating

Product Version: Unknown

27 Downloads

roof and gate can be opened & shut

No Rating

Product Version: Revit Architecture 2010

6033 Downloads

The function of the anchor loops and ridge rail is to rofm an anchor point for personal fall protection. The ridge rail is used on pitched roofs; on low-pitched roofs (pitches of less than 6 degrees) with asphalt or artificial material-based sealing surfaces, anchor loops are used.

Made in Sweden by CW Lundberg AB

No Rating

Product Version: Revit Architecture 2018

403 Downloads