Forums >> Revit Building >> Technical Support >> Structural Connection not visible in Detail

ShawnH2

active

Joined: Tue, Jan 24, 2017
0 Posts
No Rating

Howdy everyone,

Anyone shed some light on why the structural connection is not visible in the detail?

VG is all turned on and the phasing is the same, Connection is visible in Perpective but not detail

Please see attached

Cheers

Shawn

Attached Images

This user is offline

Elnazer2

active

Joined: Thu, Feb 18, 2016
0 Posts

try to switch between detail levels , this is the problem probably , or it is the visibility settings inside the family geometry itself  look at that link 

This user is offline

DavidBruinsma

active

Joined: Sun, Jun 3, 2012
13 Posts

First thing that comes to mind is View Range.

Which 'level' is the floor plan call out detail taken from - and does the view range extend down to the level below if you have taken the callout from the level at top of the C channel ring beam ?

This user is offline

ShawnH2

active

Joined: Tue, Jan 24, 2017
0 Posts
No Rating

Tried both things, you cant change the visibilty settings in the family as it is a system family and there is no editable elemants, 

I ended up deleting it and redoing the connection, somehow this has worked?

Teething problems with revit struture 2017 possibly?

Cheers

Shawn

This user is offline

Structural framing not visible in plan

4

Revit 2017 Structural Connection - where is material defined?

0

structural truss element not visible in section

5

Piping Medium Detail Issue at Mechanical Equipment Connection

3

building sections visible but detail view sections NOT visible on all drawings??

2