Forums >> Revit Building >> Technical Support >> Domed Roof not showing
|
|
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
HI, So i was wondering if anyone knew the answer to my problem here. im trying to show the roof in this east elevation but it doesn't show. the floor plan shows where the elevation is being seen at and its at the same spots for the south and north elevation and you can see it in there. but for the west and east elevations it doesn't show at all. the visual setting is on and everything that supposed to be on is on. Does anyone have any info on how i can fix this. Thanks
----------------------------------- JD |
This user is offline |
View Website
|
 |
|
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
Sorrry that didn't work here is a jpg of the problem
----------------------------------- JD |
This user is offline |
View Website
|
 |
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
Sorrry that didn't work here is a jpg of the problem
----------------------------------- JD |
This user is offline |
View Website
|
 |
active
Joined: Tue, Apr 12, 2005
1310 Posts
 |
The image does not show how far the depth of the elevation extends - is the view depth sufficient to see the dome? (I't the dotted line with the stretch arrow.)
|
This user is offline |
View Website
|
 |
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
ohh where can i find or view the dotted line with the arrow. i only have the blue line when i click on the arrow from the elevation marker. and i can move that but if its the blue line its right in front of the building. like if i put the blue line in the middle of the building it shows a section instead but the blue line is right in front of the building
----------------------------------- JD |
This user is offline |
View Website
|
 |
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
so when i was reading your idea i checked my view depth on my view properties. it seemed to show the roof now when i changed the view depth to clip with line and changed the value to a certain n umber. thanks for the help it took me awhile just to get to that point.
----------------------------------- JD |
This user is offline |
View Website
|
 |
active
Joined: Tue, Apr 12, 2005
1310 Posts
 |
You can adjust that in the view properties or in a plan view - see image (I can't see which version of Revit you're using though).
|
This user is offline |
View Website
|
 |
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
i am using the 2009 version. it doesn't seem like we have that dotted line or i just don't know how to get it
----------------------------------- JD |
This user is offline |
View Website
|
 |
active
Joined: Fri, Sep 12, 2008
59 Posts No Rating |
nevermind i found the dotted line thanks for the help
----------------------------------- JD |
This user is offline |
View Website
|
 |
active
Joined: Tue, Apr 12, 2005
1310 Posts
 |
There's no dotted line if the Far clipping is set to 'No clip', but then you should see everything in the elevation.
|
This user is offline |
View Website
|
 |
 |
Similar Threads |
Domed Roof |
Revit Building >> Technical Support
|
Mon, Aug 16, 2004 at 7:06:12 PM
|
1
|
Unable to Create Domed Roof |
Revit Building >> Technical Support
|
Thu, Jan 8, 2009 at 11:31:53 PM
|
1
|
Creating Domed Roof |
Revit Building >> Technical Support
|
Tue, Oct 9, 2007 at 12:06:36 PM
|
1
|
Creating domed roof light - mullion problem |
Revit Building >> Technical Support
|
Thu, Jul 15, 2010 at 1:26:04 PM
|
6
|
Domed roofs |
Revit Building >> Technical Support
|
Thu, Dec 22, 2005 at 5:36:33 PM
|
2
|
 |