|
|
|
Home | Forums |
Downloads | Gallery |
News & Articles | Resources |
Jobs | FAQ |
| Join |
Welcome !
|
80 Users Online (79 Members):
Show Users Online
- Most ever was 626 - Mon, Jan 12, 2015 at 2:00:17 PM |
Forums
|
Forums >> Revit Building >> Technical Support >> Adjustable angle door family
|
|
|
active
Joined: Fri, Jul 25, 2008
2 Posts
No Rating |
I've seen many examples of adjustable door families here on the site. In these examples you have the option to close a door, open it, or have it at varying degrees. The problem is, these are done in two ways that I see as inaccurate. Example 1: off/on visibility parameter for door at different positions. Example 2: 3d door extrusion is set closed but symbolic lines are adjustable by way of a parameter. However, the 3d model will never change. The symbolic lines will change in plan only. What I am wanting to do is create a real door extrusion (no symbolic or model lines) that will adjust its degree of open-ness based on an angle parameter. I've played with this for hours and can't get it to work. I continuously overconstrain the object or something else occurs. Does anyone have a door that can do this? It is possible? If so, I would really appreciate a tip in the right direction (tutorials are ok but picking apart a model that someone else has created is my best way of learning) Thanks!!
|
This user is offline |
|
 | |
|
|
active
Joined: Tue, Apr 12, 2005
1310 Posts
 |
You can do it so that it works in 3d on an angle parameter. Are you you using a reference line rather than a reference plane? The geometry needs to be aligned and locked to the reference line - it's sometimes a bit tricky, but definitely doable.
|
This user is offline |
View Website
|
|
|
active
Joined: Fri, Jul 25, 2008
2 Posts
No Rating |
I've attached the rfa file that I'm using. As you can see, the reference line I am using works perfectly. But once you lock the door onto it the angle dimension will no longer work.
|
This user is offline |
|
|
|
site moderator|||
Joined: Tue, May 22, 2007
5921 Posts
|
try.....
-----------------------------------
I Hope and I Wish to LEARN more, and more, and more.... REVIT |
This user is offline |
|
|
|
Similar Threads |
|
Nested Door Family w/ Adjustable 3D Swing Angle |
Revit Building >> Technical Support
|
Tue, Jul 31, 2007 at 5:34:20 PM
|
4
|
|
adjustable double door |
Revit Building >> Technical Support
|
Tue, Mar 27, 2007 at 10:23:28 AM
|
3
|
|
creat double door w/ adjustable swing |
Revit Building >> Technical Support
|
Mon, Apr 27, 2015 at 1:30:05 PM
|
2
|
|
Family Editor: works... then doesn't! |
Revit Building >> Technical Support
|
Fri, Sep 2, 2005 at 5:23:05 PM
|
9
|
|
Adjustable Angle Reference Gets Lost once a 90 Degree Angle is Formed... |
Revit Building >> Technical Support
|
Wed, Sep 30, 2015 at 12:28:52 PM
|
4
|
|
|
Site Stats
Members: | 1990176 | Objects: | 22877 | Forum Posts: | 152181 | Job Listings: | 3 |
|
Search
59247_Single-Flush.rfa