Forums >> Revit Building >> Technical Support >> elevation tags

emasters

active

Joined: Mon, Mar 24, 2008
3 Posts
No Rating

My ground floor interior elevation tags are showing up on the second floor as well as the ground floor, second floor tags on the third floor, etc. The view range of the elevation is limited to only one floor and the volume of the room is limited to that floor as well.

My office recently upgraded software from 2008 to 2009 and did not have this problem previously. 

Any suggestions? Thanks!

This user is offline

tim123

active

Joined: Tue, Apr 12, 2005
1310 Posts

Size your elevations so that the height only shows the relevant floor - if the floor thickness of the floor above is included then hte symbol will show in that plan.

Hope that helps.

This user is offline

View Website

emasters

active

Joined: Mon, Mar 24, 2008
3 Posts
No Rating

Thanks for the advise! 

A coworker of mine actually figured out that the associate level in the view range for levels 2 and 3 had been set at the wrong level.  I think it must have gotten shifted during the upgrade to 2009. All of our tags had to be re-added after the upgrade as well. Has anyone else had any strange problems like that in the upgrade process? 

This user is offline

Hiding View Name in Elevation View Tags

9

Elevation Tags

6

Custom Elevation Tags

4

2011 interior elevation tags

3

Multiple Elevation Tags

3