Table for Porch/ Patio

Product Version: Revit Architecture 2008

6066 Downloads

This door has lots of parametirc options and most are instance based for flexibility.  You can change the size, frame, casings (on/off), panel configuration (glass or solid), handle, and material.  You can also show the door closed or opened (any  angle) in 3D as well as in Plan View (3D angle and plan angle do NOT have to be the same and are instance based).

Product Version: Unknown

8695 Downloads

This is a parametric detail component for a casement window section. The family is adjustable for window rough opening height and wall thickness.

This is base on the Eagle Window line.

This was created in Revit 2016

Product Version: Unknown

6499 Downloads

Toilet Paper Dispenser

Product Version: Unknown

12648 Downloads

Vanity Counter Top

Product Version: Unknown

19794 Downloads

Carrito para transporte de ropa hospitalaria, en acero inoxidable de 1200 x 780 x 800mm

Product Version: Revit Structure 2016

806 Downloads

Kohler - K-3222 Ravinia Triple Basin Kitchen Sink

Product Version: Unknown

6409 Downloads

Comment are welcomed!

Product Version: Revit Architecture 2011

12223 Downloads

Material Parameter

Please Rate

Product Version: Revit Architecture 2013

1861 Downloads

Only a place holder for elevations and sections for architecture

(Captive Air - basis of design)

Product Version: Unknown

1306 Downloads

Wood Stone Robata Grill model WS-SFB-ROB

Product Version: Revit MEP 2010

27749 Downloads

This is a coffee table that I have in my office building. I just made it from memory, hope you like it

Product Version: Revit Architecture 2011

18134 Downloads

A fancy lamp post for your interior/exterior applications. Non-parametric, but easily editable. Six feet overall height

Product Version: Unknown

11710 Downloads

parametric desinger of concrete and wood, Revit version 2019

Product Version: Unknown

2727 Downloads

model pattern - Driftstone converted direct from StoneCAD to a model *.pat

Product Version: Unknown

15061 Downloads

Product Version: Revit Architecture 2008

9225 Downloads

Modern chrome and laminate table. Inspired by Fermob table. Companion chairs also available.

Product Version: Revit Architecture 2011

15848 Downloads

www.REVITCARS.com this is a parametric car, enjoy swapping from 3 doors to 5 doors. Hand traced to the finest quality.

Product Version: Unknown

32960 Downloads

length & material parametric

Product Version: Revit Architecture 2012

27438 Downloads

Puerta Interior 2 Hojas; materiales y dimensiones parametricas; 2 tipos de marco de puerta, oculto rectangular y abrazadera en U. Batiente única o doble. Batiente única de ángulo regulable y flexible.

Product Version: Revit Architecture 2013

3637 Downloads

gooseneck basin mixer

Product Version: Unknown

7140 Downloads

Yet another outlet with an invisible model line at 7', so if you set your RCP cut plane to just below 7', outlet symbols will show up. This one is a generic quadruplex outlet that someone else created. I just added the model line.

Product Version: Unknown

7254 Downloads

My first furniture model in Revit... Enjoy!!! This is actually our actual sectional.

Product Version: Revit Architecture 2011

27230 Downloads

With all code required vent, fill, supply/return etc connections.

Product Version: Revit MEP 2012

5703 Downloads

Another component of the Farmhouse style Kitchen cabinets. This is simply the base corner cabinet without a handle.

Product Version: Unknown

21343 Downloads

Inspired by THE HIGH LINE, NEW YORK

http://www.archello.com/en/project/high-line-new-york/1068934

Product Version: Revit Architecture 2014

1153 Downloads

This family is parametric so you can set the width, height, panel opening angle and louvered blade angles.

It is restricted to 4 panels, 2left and 2 right, and if you open the panels wider than 90degrees it gets confused, so if anyone can fix this for me I will be grateful.

My first upload to RevitCity!

Product Version: Revit Architecture 2016

7085 Downloads

Single hollow metal framed interior door with transom.

Product Version: Revit Architecture 2008

13365 Downloads

This casework family is over the top!  There are the usual casework dimensions, but in addition, there are instance parameters to open the doors, pull out the top drawer, and slide out the two shelves hidden behind the doors, all individually controlled.  There are dedicated materials assigned by casework subcategories.  The model is replete with pots and pans sitting on the sliding shelves.  There are ten predefined widths.  At the narrower sizes, you'll see the pots and pans sticking out through the cabinet sides, so if you want, for instance, a 21" unit, you'll have to edit the family to remove or reposition them.  The unit is modelled on the American Woodmark line of cabinets.  The properties URL will take you to the American Woodmark web site.  This is a complex model.  I have tested it thoroughly, but if there are any difficulties, please leave a note for me.

I have updated this model.  It has more subtle engraving on the doors, curved handles, and the doors open more reliably.  Open them in angular increments of something less than 90°.  For example, if you want them opened to 90°, do it in two operations with the first angle 70° and the next 20°.  Close them the same way.

Product Version: Revit Architecture 2013

7505 Downloads

Painting with artwork visible in elevations and 3D views

Product Version: Revit Structure 2020

5343 Downloads