This is a 74'' TV

Plasma TV

LCD TV

Product Version: Unknown

34927 Downloads

Combo 3 seater sofa 3d model Great design of multi functional sofa

Full description and more:

http://www.3dfurniture.net/combo-3-seater-sofa.html

Product Version: Revit Architecture 2014

45605 Downloads

This is a set of 4 patio umbrellas, 9 ft wide each, attached to a central pole. This central pole also has an umbrella on the top.

You can change the height from the ground with a parameter.

I also included a parameter for a fabric material. Once you insert in your drawing, you can add any fabric to the tops as you wish.

The poles and supports are made out of aluminum. 

Product Version: Revit Architecture 2011

12131 Downloads

Laundry stacked washer/dryer units based on the Whirlpool Compact models.  Materials are controlled by parameter settings.  Size is based on unit and not parameter controlled. 

25-3/4" D, 24" W

Recommended side and rear clearances from manufacturer are included with reference planes for alignment.

Product Version: Revit Architecture 2020

31296 Downloads

Shampoo / Hair wash station for a salon.  Includes sink attached to bulkhead and reclining chair.  All material parameters are adjustable but all dimension parameters are fixed. 

Based on a popular brand of salon bulkheads, but not dimensionally accurate to any specific make or model.

 Built in Revit 2010, not RAC 2009.  (option to specify 2010 as source not yet available)

Product Version: Revit Architecture 2009

33569 Downloads

RAC2009

comments and rate please!!!

Product Version: Revit Architecture 2009

52321 Downloads

Arne Sofa (320 model) By B&B Italia - designed by Antonio Citterio

Product Version: Revit Architecture 2010

74387 Downloads

2x12 Running Brick

Product Version: Unknown

11343 Downloads

Mental Ray Compatible.

Product Version: Revit Architecture 2009

25655 Downloads

pocket door

Product Version: Unknown

13040 Downloads

Genric Chainlink Fence Component  with Plan view options to create "fenceline" type linetye in Plan View basd on course/ medium detail level. 

Product Version: Revit Architecture 2008

6205 Downloads

Here is a purse to add that extra detail to your images.  All the materials can be changed and can be found in your materials list under Hand Bag

Product Version: Revit Architecture 2012

11745 Downloads

Product Version: Revit Architecture 2011

8818 Downloads

This file is Revit 2016 - it is also NOT parametric

Note : I built this all in Revit Architecture so it is not a family - but more of a editable revit structure that you can put doors and windows and everything you would like into it - see image for further clarification

I couldnt find any shipping containers that would allow you to essentially create a shipping container home so i thought i would make one that anyone can make easy changes too.

To edit the wall material - simply select and edit in the properties browser

To place a window or door - i have already included an insulated wall with gyp that will Host the window or door, so all one has to do, is edit the profiles of the walls to reveal your window or door.

Keep on Imagining!

Don 

Product Version: Revit Architecture 2015

15202 Downloads

Parametric pergola. Width / Length / Height of Pergola can be adjusted as well as materials. 

Product Version: Revit Architecture 2015

40878 Downloads

Product Version: Revit Architecture 2009

55125 Downloads

Here's a completely parametric pool table based on the model i own. The legs are nested families so they can be easily swapped out for your own design. Hope people find it useful.

Product Version: Unknown

42069 Downloads

Product Version: Revit Architecture 2009

13223 Downloads

Hey guys, I noticed that someone posted a Parametric Slab Family in here, but nobody could've download it. Apparently it was a fake.

A while ago I managed to get a real Parametric Slab Family (with joists and bricks), but I don't remember from where or who is the author, but I decided to post it here, so other people could use it too.

PS: I DIDN'T DEVELOPED THIS FAMILY, SO, IF THE AUTHOR SHOWS UP AND ASK ME TO REMOVE IT, I WILL REMOVE IT.

How to use: Load the family "Laje_de_Forro_Parametric_Slab_17204.rfa" in the project and create a Beam System. Change the Beam Type to "Vigota Treliçada..." and you will see the joists. Use Fixed Distance of 0,43 m. Then select one or all the joists (not the beam system) and you will see the option "Visibilidade da Lajota" in the bottom of the Properties Panel. Check it to enable the brick. That is it.

---------------------------------------------------- 

Olá pessoal, eu percebi que alguém postou uma Família Paramétrica de Laje de Forro aqui, mas ninguém conseguia baixar ela. Aparentemente era uma montagem.

A alguem tempo atrás eu consegui uma Família de Laje de Forro real (com vigotas e lajotas), mas não consigo me lembrar onde e quem era o autor, mas decidi postar aqui, para que outras pessoas pudessem usá-la também.

OBS: EU NÃO DESENVOLVI ESSA FAMÍLIA, ENTÃO, SE O AUTOR APARECER E PEDIR PRA REMOVER, EU VOU REMOVER.

Como usar: Carregue a família "Laje_de_Forro_Parametric_Slab_17204.rfa" no projeto e crie um Sistema de Vigas. Mude o Tipo de Viga (Beam Type) para "Vigota Treliçada..." e você verá as vigotas. Use Distância Fixada de 0,43m. Depois selecione um ou todas as vigotas (não o sistema de vigas) que você verá a opção "Visibilidade da Lajota" no fundo do Painel de Propriedades. Marque essa opção para habilitar as vigotas. Pronto, é isso.

Product Version: Unknown

3821 Downloads

More about me and my revit activity!

Here is one of the rare flat televisions that can be found on this site, so I decided to share it with you.

Television design we own to Sony, I just created a replica.

Family is face based so you can put it on any face, either that face is horizontal or vertical, but stick with the first one.. ;)

Product Version: Revit Architecture 2012

34690 Downloads

here is the Sofa of the set, Materials are listed under Sofa 2 to change the fabric and the feet.  Comments always welcomed.

Product Version: Revit Architecture 2012

94602 Downloads

Here is a slider window for curtain panel systems. There is an instance parameter that allows you to open the active pane.

Product Version: Revit Architecture 2011

38404 Downloads

Product Version: Revit Structure 2015

7881 Downloads

Edited wall-based lift

Product Version: Revit Architecture 2008

41402 Downloads

Product Version: Revit Architecture 2009

34253 Downloads

Product Version: Revit Architecture 2008

30508 Downloads

This curtain wall panel is an exterior, to look like a random fence of wood. Some proyects have it...

Check the parameter N to override the randomization of the vertical woods stick ( check the formula inside family)

C parameter will override the height.

Y parameters is distance vertical from bottom

YY parameters is distance vertical from top

Product Version: Revit Architecture 2011

22572 Downloads

PVC fitting:drainage, venting, sewage.

Product Version: Unknown

171 Downloads

Baluster Wing for stairs on spine. Wing to be used as a baluster on a stairs with 250mm going. spine to be created as a in-place family

Product Version: Revit Architecture 2010

21201 Downloads

EDIT:  new 2014 version here--http://www.revitcity.com/downloads.php?action=view&object_id=15176

It's much improved.

Old info:

Adaptation of the basic shelving unit, with some randomized extrusions plopped down on the shelves.  Scalable to a degree, 4-6' aprox height.  Looks reasonable in array.

Books only visible at "fine" detail level.  Shelving is bare at medium/coarse.

Product Version: Revit Architecture 2010

64521 Downloads