Cow Tongue Wall Scupper Outlet - based on a 6" pipe diameter.  This family has an instance parameter called "Wall Offset", which allows for adjustments for walls with a thicker base than upper portion.  Initial placement is to the exterior face of wall.  Once placed, adjust the wall offset parameter to bring it out to the finished face of stacked walls.

Product Version: Revit Architecture 2014

4151 Downloads

94' long high-school basketball court with correct dimensions. First upload!

Product Version: Revit Architecture 2014

39153 Downloads

nuovo full hd tv lg curvo, modello creato con revit 2015

Italia! 

Product Version: Revit MEP 2015

19888 Downloads

This is a lot like the parametric wall vent except ceiling based, and improved. Now you can change the thickness, depth, and rotation of the louvres as well as how many louvres you want so you can get the right spacing. The vent dimensions, trim, and materials are also parametric. 

REVIT 2016

Product Version: Revit Architecture 2016

5570 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

5515 Downloads

This Passenger Car contains invisible Polygons to use in your drawings. 

Product Version: Revit Architecture 2016

1819 Downloads

This component works well with the latest RevitCity upload (Raised Table)

The chair is 3' 6" tall

Product Version: Revit Architecture 2018

6490 Downloads

Parametric Recliner, complete with Symbolic lines for Plans Elevations. Drawn by Rafael

Product Version: Revit Architecture 2008

5935 Downloads

Jib Crane Parametric

Product Version: Unknown

6130 Downloads

non-parametric 

Product Version: Revit Architecture 2010

7546 Downloads

Product Version: Revit Architecture 2010

14651 Downloads

This is a family of American Woodmark 84" high, 2 doors utility cabinets.  The family includes the three widths offered:  12", 15", and 18" in 12" and 24" deep models.  The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

Product Version: Revit Architecture 2013

2769 Downloads

Toilet Elongated Contemporary Neorest

Product Version: Revit MEP 2013

11634 Downloads

REVIT 2014 Davis Seating - Kontour 3500 L

Product Version: Revit Architecture 2013

7058 Downloads

I was too hesitant to upload this family without properly checking that it flexes properly. I appologize for the confusion. This is a line based kitchen cupboard family as a generic model. The cupboards can be used in a very quick way to draft 3D cupboards inside your model and have them depict somehwat correctly in sections and plan views. There are two other very similar families which I uploaded. They are similar, but do NOT flex properly if you need to convert to imperial measurments. I am pretty sure this version will be ok. I altered some of the family parameters and constraints to better array and alter the width of the door panels, no matter what length the cupboard is. With the tweaking and fixing, this family can also be used as line based wardrobes. I included a wardrobe type within the family. I hope the owners of this site could implement a "replace" function for uploaders to better serve those downloading!

Product Version: Revit Architecture 2015

7532 Downloads

A lot like the parametric wall vent except face based if that's what you need, and improved. Now you can change the thickness, depth, and rotation of the louvres as well as how many louvres you want so you can get the right spacing. The vent dimensions, trim, and materials are also parametric. 

REVIT 2016

Product Version: Revit Architecture 2016

3612 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

3693 Downloads

Generic parametric sliding door with glazing. Three panels. Adjustable rail and stile dimensions.

Product Version: Revit Architecture 2016

38955 Downloads

Wood Electrical Utility Pole from 25' to 60' with embedment depth

Product Version: Revit Architecture 2018

3975 Downloads

The laptop i used to make the laptop

Product Version: Revit Architecture 2018

14426 Downloads

www.airzonecontrol.com

Product Version: Unknown

42 Downloads

Product Version: Unknown

1303 Downloads

beerglass (empty)

Product Version: Revit Building 8.1

6098 Downloads

Parametric Single Run Alternating Tread Stair based on Lapeyre Stair Products.

Product Version: Revit Architecture 2010

10387 Downloads

Mobile sospeso per bagno moderno

Product Version: Revit Architecture 2009

5172 Downloads

Product Version: Revit Architecture 2011

5601 Downloads

I modled this for a project at work it's a Glycol storage tank c/w baffel, pipe connections(top & bottom) and base. It's used in a pharmaceuticle plant. This is my frst upload, feel free to mess about with it and I hope it helps :)

Product Version: Revit MEP 2013

7247 Downloads

This is a Generic Model of a roof top swamp cooler with a angle support. All are adjustable.. Unit size, height, ect... It also has a duct extension.

Product Version: Revit Architecture 2012

2388 Downloads

Hand-Dryer Commercial Recessed Concealed

Product Version: Revit MEP 2013

5804 Downloads

Classic clothes airer.

6 wooden laths

fully paramatric

materials

Ceiling based

Product Version: Revit Architecture 2014

2259 Downloads