Product Version: Revit Architecture 2009

30835 Downloads

Generic metric aluminium framed window with timber reveal liner for gable end wall.  2 Panels, fixed glazing.  Head angle can be altered to match roof pitch.

Product Version: Revit Architecture 2009

7341 Downloads

Carrello per la spesa in acciaio

Product Version: Revit Architecture 2009

5059 Downloads

In this Parametric door family a part from changing the size and materials as parametric option you will even have the option to change door panels like flush door or stile door panel. This is made in revit 2016 you wont be able to open it in older versions. If you find it useful please rate it. 

Product Version: Unknown

11135 Downloads

Plain glass mirror without frame, good for bathrooms. Adjustable using grips (in elevation view) or by typing dimensions into properties panel.

Product Version: Revit Architecture 2017

16725 Downloads

I created this. This machine is used for heat transfer for tshirts and what not. 

Product Version: Revit Architecture 2017

266 Downloads

Please rate and comment, thanks!

Took a while to figure out how to get these to work properly.

The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.

The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com

Cans be individually rotated in project.

!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!

Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).

The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.

You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.

I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.

Hope these are helpfull for you!

Product Version: Revit Architecture 2017

1078 Downloads

Simple Scale bar 1:100

Product Version: Unknown

8621 Downloads

Concrete Boom Pump Truck - Boom Extenteded

Product Version: Unknown

7908 Downloads

Medicine Cabinet, flush mounted, frameless mirror. Control visability of swing in plan and elevation (on-off)

Product Version: Revit Architecture 2009

5573 Downloads

Sinalização para banheiro aceesivel fem

Product Version: Unknown

436 Downloads

 Gus Modern Return Bench 

http://www.gusmodern.com/products1/tables-accents/return-bench/return-bench.shtml#return-bench

Product Version: Revit Architecture 2011

64826 Downloads

This family is based off of the Plastico Pyramid Skylights that are for larger opening spans.  It's a modular system with adjustable skylight size with a set minimum 17.25" width and 99" max length for individual units.  The number of units length and width is adjustable to as large as needed to no smaller than 3x3. The mullion, curb depth, curb height, frame height, and pyramid heights are all adjustable.  This family requires at least 3 unit by 3 unit setup, otherwise it won't look right.  I have created another family for 2x2 units (4 skylights total) that is parametric also. 

Product Version: Revit Architecture 2013

5228 Downloads

Its a cool fireplace, made at  nohs

Product Version: Unknown

4633 Downloads

This is a companion to the other parametric bathroom stall but it has no walls, for the last stall on the end. Use the same parameters as the other family and the families should match. 

REVIT 2016

Product Version: Revit Architecture 2016

17532 Downloads

Parametric circular hand rail - Generic face based family

rail length and face offset instance parameter / rail support type parameter

Product Version: Revit Architecture 2015

2639 Downloads

Based on Item #3516 Book return by Children's Furniture manufacturer, Jonti-Craft.

Product Version: Revit Architecture 2016

1580 Downloads

Hey guys, so here is a Lego Minifigure that you can completely customize to your liking. Materials are listed under the properties tab in the edit type section for an easy change to any material or color that you would like. Not Parametric, he is 3'10" tall, 2'5" wide and 8" thick. Please rate and enjoy!

Product Version: Revit Architecture 2018

1415 Downloads

Cabinet pull, modeled after one made by Southern Hills. Parametric in length and materials.

Product Version: Revit Architecture 2017

1616 Downloads

The artwork is inspired by Piet Mondrian recreated within Revit.

Product Version: Revit Architecture 2017

1669 Downloads

drinking fountain - wall mounted - fully recessed

Product Version: Revit Building 5.1

5239 Downloads

Laundry Chute Intake

Product Version: Revit Building 9.1

6871 Downloads

parametric blind-you can adjust the blind rotatio

Product Version: Unknown

3644 Downloads

wall mounted. based on the Filtrine FCC-107-14-HL but minimally drawn

Product Version: Unknown

3557 Downloads

Wall-Hosted family.  Curved grab bar for ADA shoower.  Can be mirrored into position if needed.  Fully adjustable w/ pull arrows.

Product Version: Revit Architecture 2010

6817 Downloads

Modern Geometric Coffee Table w/

<>Multi-Level Platforms of Colored Glass on

<>White Vertical Panels - Post Modern Design

Visit my website at http://www.4u2cdesign.com

Product Version: Revit Architecture 2010

8280 Downloads

A presentation cabinet for conference rooms.  This model is based on the Peter Pepper Products CC-4848 product.

The Presentation Cabinet contains two doors which open to reveal a whiteboard inside as well as a pull down screen and fabric panels on the inside of the doors to pin up papers. 

I did flex the family so you should have no problems with creating a custom size.  All materials are set, but you may change them if desired.

I searched long and hard for a model of this product (which is used quite often) but couldn't find one anywhere, so I created one.

Product Version: Revit Architecture 2011

6449 Downloads

Eaton’s enclosed circuit breakers offer all the advantages and accessories of a circuit breaker packaged in an enclosure for nearly any application requiring a means of disconnect. Ideal for a variety of locations including general purpose, rainproof surface mounting, water and dustproof, dustproof surface mounting, and hazardous locations.

Product Version: Unknown

4271 Downloads

Decorative trash Can for exterior use.  All materials are listed under Trash Can 2 for easy location and changing of materials to suite your need.

Comments Suggestions Ratings Please

Product Version: Revit Architecture 2012

16747 Downloads

Create By Mohamed Mostafa 

 at Revit 2015

My Channel Youtube

https://www.youtube.com/c/MohamedMostafaAlsharif

My Page in FaceBook

https://www.facebook.com/3dquality

Product Version: Revit Architecture 2015

717 Downloads