This baluster is used to make a stockade fence of 6ft tall. (accurates sizes H,W,D)

No Rating

Product Version: Revit Architecture 2012

866 Downloads

here is a barrier with base, crawling protection and parametric barrier length

No Rating

Product Version: Revit Architecture 2013

5361 Downloads

No Rating

Product Version: Unknown

5403 Downloads

No Rating

Product Version: Unknown

2169 Downloads

3' x 5'

No Rating

Product Version: Revit MEP 2013

1258 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  33 Hz - 200 Hz - 3 dB27 Hz – 200 Hz -10dB
  
  


• continuous output
  
  140 dB SPL
  
  


• peak output
  
  146 dB SPL
  
  


• sensitivity
  
  110 dB (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  four 12" long excursion woofers
  
  


• dimensions
  
  26.5 x 45 x 45 inches
  
  


• weight
  
  357 lbs
  
  


• Rated Impedance
  
  Switchablea single 2 ohm loadortwo 4 ohm loads
  
  


• Power Rating
  
  4000 W continuous 8000 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th412/
  
  

No Rating

Product Version: Unknown

111 Downloads

No Rating

Product Version: Revit Architecture 2015

3977 Downloads

Custom Wood Vanity Cabinet Built for Kohler Archer Series Sink. This version is custom made for a corner location.

No Rating

Product Version: Revit Architecture 2015

618 Downloads

Work Table with Drawers - Fully Parametric

No Rating

Product Version: Revit Architecture 2014

2160 Downloads

ITs not mine,Original version is on here  but it was crooked and in mid air- I fixed it so it is straight and on the surface.

It was fixed in Revit 2017 

No Rating

Product Version: Revit Architecture 2016

6247 Downloads

Acapulco Chair - nom parametric

No Rating

Product Version: Unknown

4994 Downloads

VISIT HILLPHOENIX.COM

No Rating

Product Version: Revit Architecture 2015

190 Downloads

Jardim Primavera Munó, peça de composição para o centro.

No Rating

Product Version: Revit Architecture 2017

198 Downloads

No Rating

Product Version: Unknown

2129 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

435 Downloads

A deep plastic tray for various use

No Rating

Product Version: Revit Architecture 2018

932 Downloads

Series ISCA-102-L/R Industry Standard single horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

53 Downloads

No Rating

Product Version: Unknown

851 Downloads

Bolardo existente en las calles de Madrid

No Rating

Product Version: Revit MEP 2019

341 Downloads

AGRV_Door_FoldingX_多門摺疊門

with parameters for open/close door in 3D view

Metric X piece Folding door with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

1518 Downloads

ADDITIONAL PARAMETERS // MATERIALS

FREE NEW FAMILIES // DOWNLOAD AT THECREATIVEROUTE.COM

No Rating

Product Version: Revit Architecture 2019

992 Downloads

My best recreation of the Charles Ghost barstool from Kartell.  Non-para.  Material can be set, however, the piece is made from molded polycarbonate.

I made this for my wife who is an interior design student.  Hopefully it helps some others out there.

No Rating

Product Version: Revit Architecture 2017

975 Downloads

MIFAB® Series F1100-C-( * )HG-3 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, cast iron membrane clamp with primary and secondary weepholes for waterproofing membrane, and hinged heavy duty, polished stainless steel strainer

with vandal resistant stainless steel allen key screws. (For non-membrane floors, delete -C from Series number).

No Rating

Product Version: Unknown

25 Downloads

MIFAB® Series MI-FISH sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale interceptor. Unit shall include: Sediment bucket with perforated baffle near inlet (3/8” (9) holes), primary removable straining baffle (1/2” (13) thick with 1/4” (6) holes), secondary removable straining baffle (1/2” (13) thick with 1/8” (3) holes), securing bolt(s), removable cross bar, stainless steel calibrated orfice plate and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

111 Downloads

No Rating

Product Version: Unknown

1011 Downloads

Basic 3D model to give an idea of dimensions and space requirements eg for when fiting within cabinetry

No Rating

Product Version: Unknown

109 Downloads

No Rating

Product Version: Revit Architecture 2020

369 Downloads

These Indian style door windows are created as per actual elements in use.

Banarasi Door & Windows

1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.

2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.

3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.

4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.

5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.

6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.

7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.

8. Any querry can be done on my phone number 91 9919640999  

9. Welcome for further help.

No Rating

Product Version: Revit Architecture 2018

72 Downloads

Custom Flow (CF) slot diffusers are uniquely designed for curving and long continuous installations. The CF offers a large range of airflow flexibility with one or two slot arrangements, various slot widths, and vertical or horizontal pattern adjustment.

No Rating

Product Version: Unknown

51 Downloads

Horizontal rectangular exhaust terminal with connection to round duct

No Rating

Product Version: Unknown

9237 Downloads