No Rating

Product Version: Revit MEP 2010

110 Downloads

Complete parametric Clopay model 3722 door with adjustable size, window options, and track options accurately representing the true consumed space of the physical door in both open and closed positions, allowing for plan details and interference checking to precise dimensional requirements. Model 3722 - 2" thick sectional overhead garage door with 20 gauge flush exterior steel and polyurethane insulation with vinyl backer. R-value 17.2. For more information, specifications, CAD files, and additional Revit family downloads please visit www.clopaydoor.com.

No Rating

Product Version: Revit Architecture 2011

1929 Downloads

http://lkdesigndeinteriores.blogspot.com/

No Rating

Product Version: Revit Architecture 2010

1905 Downloads

STAINLES STEEL TOASTER

No Rating

Product Version: Unknown

2504 Downloads

Black

No Rating

Product Version: Unknown

3629 Downloads

Stool generally used for the education market. Can be used as an art stool or in science. Plastic seat with a pleasing aesthetic using holes punched through. Seat has a small lip at the back for additional support. Sits on a steel sled frame. Manufactured by Hille Educational Products

No Rating

Product Version: Revit Architecture 2013

3118 Downloads

Body Material: Low-Lead Cast Bronze ASTM B 584

Connection: Size 3/4", 1"

Connection Type:  Threaded FNPT ANSI B1.20.1

Factory Set Pressure: 50 psi

Reduced Pressure Range:  (3/4"-1") 25 psi to 75 psi

Working Pressure:  (3/4" - 1") 300 psi

No Rating

Product Version: Revit MEP 2013

1650 Downloads

SPECIFICATIONS

• operatingfrequency range
  
  33 Hz - 200 Hz -3dB27 Hz - 260 Hz -10 dB
  
  


• continuous output
  
  126 dB SPL
  
  


• peak output
  
  132 dB SPL
  
  


• sensitivity
  
  100 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
  
  


• driver complement
  
  one 12" Long Excursion Woofer
  
  


• dimensions
  
  38 x 18 x 30.2 inches
  
  


• weight
  
  142 lbs
  
  


• Rated Impedance
  
  8 Ohms
  
  


• Power Rating
  
  400 W continuous, 800 W program
  
  


• 
  
  http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th112/
  
  

No Rating

Product Version: Unknown

98 Downloads

All parts of this Indian table are parametric

No Rating

Product Version: Revit Architecture 2013

846 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are and how far down they extend. you cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

No Rating

Product Version: Unknown

2152 Downloads

Vending machine shell. Color is parametric.

No Rating

Product Version: Revit Architecture 2016

2907 Downloads

DOUBLE-TIER HORIZONTAL HEADWALL

WALL-BASED SPECIALTY EQUIPMENT

No Rating

Product Version: Revit Architecture 2015

1443 Downloads

Cast in place Adjustable shape trapozoidal Isolated footing for columns. Varable pedestal base & fully parametric Ver 2015 by L.J.Upadhyay.

No Rating

Product Version: Revit Architecture 2015

2149 Downloads

This is a casework of a small pantry in Revit 2017 Version

No Rating

Product Version: Unknown

9257 Downloads

A view title I created with a self extending extension line so you don't have to keep editing the length. The trick is to turn off the extension line in the family and let the lable underline act as the extension line. Note, there are spaces in the lables prefix to allow for the offset in the text and the underline to extend to the left. Edit to fit your standards. Hope you find this helpful

No Rating

Product Version: Revit Architecture 2016

1992 Downloads

VISIT HILLPHOENIX.COM

No Rating

Product Version: Revit Architecture 2015

304 Downloads

Hollow clay blocks

No Rating

Product Version: Revit Structure 2018

255 Downloads

Made this symbol for easier use too, you can set the size from its base length in edit type. Do rate :)

No Rating

Product Version: Unknown

2001 Downloads

Series ISCA-101-L/R-AUX Industry Standard single horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in(102mm) no hub waste and 2 in(51mm) no hub vent connections, 2 1/8 in bend auxiliary inlet, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

49 Downloads

Nested 1DL1SL window having 1 frame of 2 Win bay  & 1 Multi Light door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator or Low Lite  simply set their Ht to zero.  Multi lite panel can be 1V x1H to 3V x 2H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero by simply set Stile panel offset and rail panel offset to zero, if you do'nt need it. Swing of Vent leaf as well as window leaves are operable by setting 3D swing angle. Sunshed,Sill, & Side fins can be adjusted on/off etc.  etc.  Lallan Ji

No Rating

Product Version: Revit Architecture 2015

887 Downloads

1300mm x 1600mm fuel tank. thankyou habibi. muah kit

No Rating

Product Version: Revit Architecture 2017

778 Downloads

No Rating

Product Version: Revit Architecture 2017

4582 Downloads

for poterry studio

No Rating

Product Version: Revit Architecture 2018

404 Downloads

MIFAB® Series F1100-C-ER( )-1 lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and extended rim (specify diameter), satin finished nickel bronze strainer with vandal resistant, stainless steel allen key screws. (For non-membrane floors, use MIFAB F1100-ER Series.)

No Rating

Product Version: Unknown

12 Downloads

MIFAB® Series MI-ELB (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-ELB Series of flexible couplings are listed with I.A.P.M.O. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

255 Downloads

48"x30"x30" CADD table with drafting board cover and paralllel bar as used in CADD lab at Valencia College. Add separate Monitor, tower computer and keyboard.

No Rating

Product Version: Unknown

922 Downloads

Used this to mock up the location of the CNC.Contains some imported geometry.

No Rating

Product Version: Revit Architecture 2020

621 Downloads

No Rating

Product Version: Unknown

322 Downloads

The High Capacity Drum Louvers (HCD) consist of extruded aluminum blades mounted inside a rotatable drum to produce long air throws with a high degree of directional control.

The HCD provides long throws to supply air to spaces that cannot be served by ductwork and conventional outlets due to structural or architectural restrictions. This makes the HCD ideal for use in warehouses, factories, stadiums, or any large enclosed space. For demanding environments such as industrial plants, or areas where corrosion resistance is necessary, an all stainless steel option is available. 

No Rating

Product Version: Unknown

76 Downloads

This dresser is meant to be built-in, in multiples as needed.

It has two shallow drawers on top for jewelry, etc, and four larger drawers below for clothing.

Built in Revit 2024.

No Rating

Product Version: Unknown

90 Downloads