Jardim Primavera Munó, peça de composição para o canto esquerdo.

Product Version: Revit Architecture 2017

151 Downloads

MIFAB® Series MI-E-O-HU__ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.

Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s).

Product Version: Unknown

121 Downloads

A nice looking simple Shutter

Product Version: Unknown

8041 Downloads

An outlet/switch with an invisible model line at 7', so if you set your RCP cut plane to just below 7', outlet symbols will show up.

Product Version: Revit Architecture 2008

3852 Downloads

Product Version: Revit Architecture 2009

11347 Downloads

Locker as determined by overall width and number of units. You will need to duplicate in order to add stacked units. The toeckick is adjustible should you want to turn it into a shelf for units raised off the floor.

Product Version: Revit Architecture 2010

4552 Downloads

Created with conceptual mass, the awning width is parametric. 

Product Version: Revit Architecture 2011

22653 Downloads

3 Bike racks by Barco Products

http://www.barcoproducts.com/store/index2.asp?DEPARTMENT_ID=156

Modelled in Revit 2012

Product Version: Unknown

11127 Downloads

AntennaTelecom

Product Version: Revit Architecture 2012

1836 Downloads

standard size deck of cards

Product Version: Unknown

2106 Downloads

Site Component - Parametric Electrical Timber Pole

Product Version: Unknown

4246 Downloads

MANTOVA brand - Australasia - Metric

All widths and depths

Product Version: Revit Architecture 2014

1083 Downloads

2D Succulent plant with paramters that allow 2ft, 4ft & 6ft diameters, along with a pot visibility option for each size.

Product Version: Revit Architecture 2020

2375 Downloads

Grandfather Clock

Product Version: Unknown

5606 Downloads

Solar Hot Water System
snaps to roofs

Product Version: Unknown

17684 Downloads

Real Revit family, not an artificial imported AutoCAD facsimile. Parameters for Body Color and Stand visibility.

Product Version: Revit Architecture 2008

7722 Downloads

A switch with an invisible model line at 7', so if you set your RCP cut plane to just below 7', outlet symbols will show up.  This one is a single switch.

Product Version: Revit Architecture 2008

8224 Downloads

Product Version: Unknown

538 Downloads

Product Version: Revit Architecture 2009

8366 Downloads

Product Version: Revit Architecture 2009

6048 Downloads

Loosely based on an end table seen in the Art Institute Of Chicage

Product Version: Revit Architecture 2010

11983 Downloads

workplace with computer, chair, phone, tft-monitor and free space. created with revit families found on diffrent sites on the web

Product Version: Unknown

6307 Downloads

Here it is folks, an Ionic Column based on the one available here on RevitCity for so many years.  But this one acts just like normal columns, with Base and Top level parameters to define the height, and the column itself scales properly based on that height.

 Thanks to this blog post on how to make this work: http://domokurarchitects.blogspot.com/2013/01/revit-tip-scalable-model-family.html

Product Version: Revit Architecture 2013

11263 Downloads

Product Version: Revit MEP 2013

3439 Downloads

MANTOVA brand - Australasia - Metric

All widths and depths

Product Version: Revit Architecture 2014

669 Downloads

This is the BB Lounger by the Baker Brothers

Product Version: Revit Architecture 2014

6415 Downloads

I made everything myself, except for the engine, that credit goes to docvingoldman2708 - who did an amazing job

All materials should be able to be rendered however you like, just ungroup the object and have at it.

Enjoy

Product Version: Revit Architecture 2015

2277 Downloads

U-Shaped Parametric Kitchen Counter complete with double sink. Countertop lengths and widths are parametric, as well as all three backsplashes can be turned on-off by instance as required.

Product Version: Unknown

6731 Downloads

Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

797 Downloads

Revit 2019 : Can appear in a Site schedule, Place Family on control point. There are 3 Types of control points to choose from. Monument, Monument Calc’d and Control Point. Each type has its own Gen. Annotation symbol. The first two are square n. The 3rd is a triangle p. There is a 3D raised Triangle on Family. Use the top of the triangle to attach leaders for Spot coordinates and Elevations to create a leader to the top of the 3D Triangle on top. The NEE parameters are instance parameters and will not move the point. Use “Survey Site Tag NEE 2019 updated” To show the NEE on screen. Use Spot coordinates and Elevation tags to move the family to match the instance NEE. Enjoy!

Product Version: Revit Structure 2018

418 Downloads