DO NOT USE - See newer version "CANS OF COKE"

Image files do not work.

REVIT CITY - PLEASE REMOVE THIS ITEM

Product Version: Revit Architecture 2014

1050 Downloads

DO NOT USE - See newer version "CANS OF PEPSI"

Image files do not work.

REVIT CITY - PLEASE REMOVE THIS ITEM

Product Version: Revit Architecture 2014

751 Downloads

DO NOT USE - See newer version "CANS OF BEER - MORE"

Image files do not work.

REVIT CITY - PLEASE REMOVE THIS ITEM

No Rating

Product Version: Revit Architecture 2014

791 Downloads

Pure Revit Arch 2019. 1.2 MB. Generic model for basic concept design. Body colour by instance. If you like it or if something doesn't work, please let me know by rating or a comment. Cheers.

Product Version: Unknown

9737 Downloads

iLevel® Shear Brace delivers outstanding lateral force resistance. They are easy to work with and install, and they meet or exceed code requirements for both engineered and prescriptive design.

Product Version: Revit Architecture 2009

1170 Downloads

I took mbonifa 's Panca metalco Big Harris and added a width parameter. really like this bench; thanks mbonifa!

No Rating

Product Version: Revit Architecture 2012

5313 Downloads

Typical city kerb and channel profile used in most of New Zealand.

I generally use this as a 3d sweep on a footpath (floor) edge.

(On simple projects, I use floors as footpaths/yards/roads/landscaping etc. as I find it easier to work with them than with topo surfaces).

No Rating

Product Version: Revit Architecture 2018

407 Downloads

A basic, but parametric "house". It is meant to show what an area would look like with other nearby structures.

*Notes*

• Automatic lighting does not work , but it is disabled by default anyway


• Several of the parameters have misleading names


• Feel free to use this however you want

No Rating

Product Version: Unknown

453 Downloads

Parametric corner guard with adjustable height. Choose correct wall for corner guard to work

No Rating

Product Version: Revit Architecture 2015

1751 Downloads

DO NOT USE - See newer version "CANS OF COKE"

Image files do not work.

REVIT CITY - PLEASE REMOVE THIS ITEM

No Rating

Product Version: Revit Architecture 2014

648 Downloads

Ok, I've made an attempt creating a PPP trap primer. It has connection points but when I insert it into my model the connectors don't appear to work. Maybe somebody can take a look at it and improve on it. If you do please let me know so that I can either download the fixed family or let me know what I need to do to fix this family. Thanks!

No Rating

Product Version: Unknown

425 Downloads

2 part high bar. (straight piece and 45 deg. piece) Made to work seamlessly with default Revit cabinets in the imperial library and my Angled corner Cupboard which can also be downloaded from this site. 

No Rating

Product Version: Revit Architecture 2008

2895 Downloads

It's actually a mass with pattern centered dimensioned, but you can work with a lot of parametrics to cover some squared or rectangled space you want. hope you guys enjoy.

By the way, at the pic, its using another family i created a 3d spatial truss, works fine but heavy as hell!!

Product Version: Revit Architecture 2013

11748 Downloads

Wall based brick to provide ventilation in a foundation wall

Basic non parametric, (as I am not sure of how to make arrays work within different parameters)but can be easily modified.

Product Version: Revit Architecture 2011

2028 Downloads

This is my first upload, hope it`ll work out for some of you! It`s a very large 4-seater sofa that I needed for a particular project ,inspired by Belta design, but it totally editable, so you can make it 2 or 3-seater if you need to.

Product Version: Revit Architecture 2012

34823 Downloads

If you messed up your shared coordinate, use this to revert back to original position. To get it to work, link this into your project, choose AUTO-Origin to Origin and then click on ACQUIRED COORDINATE.

No Rating

Product Version: Unknown

66 Downloads

Not fully parametric; the width should work, but the height definately won't.  the logistics of making a parametric stained glass window just seem a little impossible.  yes the file is HUGE.  any suggestions on how to make it smaller are certainly welcome.

Product Version: Unknown

9120 Downloads

Please rate and comment, thanks!

Took a while to figure out how to get these to work properly.

The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.

The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.com

Cans be individually rotated in project.

!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!

Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).

The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.

You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.

I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.

Hope these are helpfull for you!

Product Version: Revit Architecture 2017

1088 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

Product Version: Revit Architecture 2017

718 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

592 Downloads

Please rate and comment, thanks!Took a while to figure out how to get these to work properly.The track is PureEdge Pipeline with LED uplight (very cool!).  Available in 2', 4', 6', 8', and 10' lengths.  I'll be uploading the 4'-10' pieces.  The hanging height is parametric, but the number of cans and can spacing will have to be changed in family editor.The cans are focus adjustable, dimmable, gallery series artwork LED cans found at cocoweb.comCans be individually rotated in project.!!!DO NOT ROTATE THE CANS BEYOND 179 OR -179 DEGREES OR THEY WILL EFF OFF INTO LOW EARTH ORBIT!!!Can pitch can be individually adjusted but should be kept between 15 and 105 degrees (for some reason the ACTUAL angle is off by 15 degrees, so entering 15 will set the can to zero, or parallel with the track).The can light sources are point+spot.  The beam angle and sourounding field angle can be adjusted as well.You can add cans, but will have to add the corresponding parameters and labels to make the new cans function properly. You'll also have to save the new can as a seperate family, ie. "Can 7", "Can 8", etc.  This was the only was i could figure to get the individual pitch parameters to work.I'm sorry if there's a better/easier way to do all this, but I'm self taught and there's still a lot I don't know.Hope these are helpfull for you!

No Rating

Product Version: Revit Architecture 2017

477 Downloads

Typical sloping kerb and channel profile used in most of New Zealand.

I generally use this as a 3d sweep on a footpath (floor) edge.

(On simple projects, I use floors as footpaths/yards/roads/landscaping etc. as I find it easier to work with them than with topo surfaces).

No Rating

Product Version: Revit Architecture 2018

451 Downloads

Based on parametric casework I previously downloaded I created upper cabinets. The sizes are parametric. I could not get the one/two shelf options to work so I created the seperate versions.

No Rating

Product Version: Unknown

1882 Downloads

This is cast iron potbelly stove, it is somewhat primitive but it is work for me

No Rating

Product Version: Revit Architecture 2010

4064 Downloads

This is the Spectra SP1.  This is based on the CAD file available on www.aal.net.  I don't work for them; I just modeled their light because I needed to use it in Revit.

No Rating

Product Version: Revit Architecture 2008

10561 Downloads

This is a table that is intended for commerical kitchens.  I found one online but it woundn't work so i made my own.  I also made one with a sink.  Hopyou like it

Can someone tell me how to put a picture on too. Thanks

Product Version: Revit Architecture 2010

3062 Downloads

Cylindrical pendant for a work project. Drop from Ceililng, fixture radius, Fixture Height are all parametric, as well as materials. 

Modeled in Revit 2017

Product Version: Unknown

4243 Downloads

All Besta shelving units, but without the doors. Too many options for type and location of doors for parametric. (At least for me to work out at the moment.) All part numbers and prices (correct in UK May 2011), ready to schedule. Shelving in standard locations.

Product Version: Revit Architecture 2012

17148 Downloads

I designed this for an alzheimer unit. It is made so the paients can walk around and exercise.  I coulndnt find one on the site so i made one that would work with my situation. It is attached to the floor and its dimensions are editable. I hope you like it.

Product Version: Revit Structure 2010

5295 Downloads

I modled this for a project at work it's a Glycol storage tank c/w baffel, pipe connections(top & bottom) and base. It's used in a pharmaceuticle plant. This is my frst upload, feel free to mess about with it and I hope it helps :)

Product Version: Revit MEP 2013

7250 Downloads