Merry Christmas 2023! In Structural Insultated Panel (SIP) framing, the best header beam solution is typically two(2) wood members adhesively laminated to rigid insulation. This is also the best header for energy efficient wood framing.  This file is a parametric 3 section beam where two equal structural members of any width and depth are spaced apart as needed with a centered void left for insulation.  It seems to work fine but please judge for yourself and make improvments as needed. And Happy New Year 2024!

No Rating

Product Version: Unknown

282 Downloads

Merry Christmas 2023! In Structural Insultated Panel (SIP) framing, the best header beam solution is typically two(2) wood members adhesively laminated to rigid insulation. This is also the best header for energy efficient wood framing.  This file is a parametric 3 section beam where two equal structural members of any width and depth are spaced apart as needed with a centered void left for insulation.  It seems to work fine but please judge for yourself and make improvments as needed. And Happy New Year 2024!

No Rating

Product Version: Unknown

109 Downloads

Merry Christmas 2023! In Structural Insultated Panel (SIP) framing, the best header beam solution is typically two(2) wood members adhesively laminated to rigid insulation. This is also the best header for energy efficient wood framing.  This file is a parametric 3 section beam where two equal structural members of any width and depth are spaced apart as needed with a centered void left for insulation.  It seems to work fine but please judge for yourself and make improvments as needed. And Happy New Year 2024!

No Rating

Product Version: Unknown

115 Downloads

A W type beam (also known as an I beam), but with variable section. You can control section height, width, and thicknesses on both ends of the beam, and the section will vary from one to the other. 

The beam is modelled to be a flat top: the top flange will always remain horizontal.

No Rating

Product Version: Revit Structure 2017

6575 Downloads

Structural beam with different depth at ends and in the middle (parameters Beam Depth (min) and ditto (max)). Free choice of material.

Modelled to the endplanes - won't be cut back from join.

Sugestions welcome

No Rating

Product Version: Revit Architecture 2009

4605 Downloads

Craftsman Style exterior built up quad column with tapered concrete base and wood beam capital top. Has parametric adjustment. Our own design.

Product Version: Unknown

16350 Downloads

A UB (universal beam) that tapers from a set size at one end to a set size at another (eg 180UB22 to 460UB67). Took a long time to figure out how to make it, but the actual making was simple.

Can split an existing beam into 3 pieces, change one to a different size, and switch the centre piece to one of these. Enjoy.

No Rating

Product Version: Revit Architecture 2014

5371 Downloads

This aluminum Beam is parametric and comes with labels on the sides and top.

Product Version: Revit Structure 2009

1542 Downloads

parametric hollow core beam.

Product Version: Revit Architecture 2009

4835 Downloads

parametric hollow core beam.

No Rating

Product Version: Revit Architecture 2009

2622 Downloads

The bucket bracket is to be used at the ends of a wood beam. Two downloads are available, one with the stand-alone connector, and one with it attached to the ends of a glulam beam. The glulam beam with integrated bucket bracket is easier to use, but if you wish to use different parameter settings for each side, or want to use the bracket on a different beam family, use the standalone bracket family file. All parameters are shared, so they can be used in schedules. The detail of the model has to be medium for the plates to appear, and fine for the bolts to appear.

See http://dylanbrowndesigns.com/resources/parametric-timber-connections-for-revit/ for an illustrative guide on how to use the connector.

This file was made in Revit 2018.

No Rating

Product Version: Unknown

559 Downloads

Structural Profile made off wood and manufactured by Moelven

http://www.moelven.com/dk/Produkter/Trae-konstruktioner/Trakonstruktioner/Moelven-bjalkesystem/I-bjalke/I-Bjalker/?filters=Kategori%202%7CI-bj%C3%A6lke;

No Rating

Product Version: Revit Architecture 2013

4052 Downloads

Structural Profile made off wood and manufactured by Moelven

I also made a matching stainless steel bracket 

http://www.moelven.com/dk/Produkter/Trae-konstruktioner/Trakonstruktioner/Moelven-bjalkesystem/I-bjalke/I-Bjalker/?filters=Kategori%202%7CI-bj%C3%A6lke;

No Rating

Product Version: Revit Architecture 2013

2514 Downloads

This is a self illuminated beam I made to go with the columns I made.

i will make a marble version next to match that column.

Product Version: Revit Architecture 2011

4097 Downloads

This is a beam with an upper haunch at each end. The haunch properties are Type parameters.

No Rating

Product Version: Revit Structure 2011

3982 Downloads

3D Beam for Framing Plans.

Slopeable and you can add framing tags to represent the beam on the framing plan.   Shared element so you can actually create a Framing Member Schedule.

Fully Parametric.

No Rating

Product Version: Revit Architecture 2016

2042 Downloads

This is a metric version of the beam that the CADclip series covered on beams. Totally Adjustable and the abutments can be turned off. It is important to adjust the visibility graphics [IN INSTANCE PROPERTIES] when installing this object, whatever plan view you are working on-  adjust the depth of the view to accomodate the depth of the beam 

No Rating

Product Version: Revit Architecture 2011

1342 Downloads

Stainless steel bracket for the structual I beam.

No Rating

Product Version: Unknown

1361 Downloads

Vertical orientated member parametric wood truss. You can adjust length depth, member size, top chord & bottom cord size and top cord extension. works with beam systems.

No Rating

Product Version: Revit Structure 2013

5055 Downloads

A parametric I-Beam family you can use in your project.

No Rating

Product Version: Revit Structure 2015

5936 Downloads

Just like the tapered column you can change the flange thickness, web thickness, depth, and width of the start and end of beam independently.

Product Version: Revit Structure 2012

13409 Downloads

Steel I-Beam with parameters

No Rating

Product Version: Revit Architecture 2018

8350 Downloads

Fully adjustable beam:

- Rectangular profile (b=..., d=..., b1=0, d1=0)

   OR

- 'I' profile (b=..., d=..., b1=..., d1=...)

- Width (b) & height (d),

- Arch height (Arch_h),

- Material.

No Rating

Product Version: Revit Architecture 2010

4804 Downloads

Parametric chilled beam for MEP uses

No Rating

Product Version: Revit MEP 2018

468 Downloads

Viga parametrica de hormigon, tipo canaleta

(Concrete Beam Parametric, type gutter)

Product Version: Revit MEP 2010

3285 Downloads

Precast concrete. Parametric L shaped beam.

No Rating

Product Version: Revit Architecture 2013

3552 Downloads

Structural bent beam but not parametric.  Roof based family.  Pretty easy to revise dimensions.

No Rating

Product Version: Revit Architecture 2011

1308 Downloads

The bucket bracket is to be used at the ends of a wood beam. This download includes the standalone bracket family file. Visit my site below to get the bucket bracket integrated into a beam. All parameters are shared, so they can be used in schedules. The detail of the model has to be medium for the plates to appear, and fine for the bolts to appear.

See http://dylanbrowndesigns.com/resources/parametric-timber-connections-for-revit/ for an illustrative guide on how to use the connector.

This file was made in Revit 2018.

No Rating

Product Version: Unknown

4024 Downloads

Trapezodial slanted beam. Revit 2019

Product Version: Unknown

2338 Downloads

Wood frame stair with 100mm support beam

Product Version: Revit Architecture 2017

1936 Downloads