Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

758 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a bronze (1/2 to 2 in) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

359 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. It incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Its compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

495 Downloads

Series 757, 757N Double Check Valve Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Its compact housing consists of two independently operating tri-link check valves, two shutoff valves, and four test cocks. It features a stainless steel housing and sleeve and is 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

352 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

368 Downloads

Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining stem. The B6000, B6001's standard port orifice ensures minimal pressure drop, while Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model B6000 has threaded NPT end connections and Model B6001 has solder end connections. Pressure Rating: For 1/4 to 3 in. - 600psi WOG (non-shock); 150psi WSP; For 4 in. - 400psi WOG (non-shock); 125psi WSP.

No Rating

Product Version: Revit MEP 2010

265 Downloads

Series 909RPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 909RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of an epoxy-coated cast iron body with stainless steel trim, bronze gate valves, a pressure-differential relief valve, shutoff valves, and bronze ball-type test cocks. Series 909RPDA provides maximum flow at low pressure drop utilizing the "air-in/water-out" design principle for protection during emergency combined backsiphonage and backpressure conditions. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

583 Downloads

Watts Drainage Products CA-481 wall mounted steel support plate with plated hardware.

No Rating

Product Version: Revit MEP 2014

76 Downloads

Series LF1170, LFL1170 Lead Free* Hot Water Temperature Control Valves are specifically designed for mixing hot and cold water on hot water supply systems. They can be used for a variety of applications to reduce the temperature of the hot water from the system, and are ideal for radiant heat applications. This series features a "double throttling" design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber. The LF1170 can be set to any temperature between 90°F and 160°F (60°F and 120°F for model LFL1170-M2) with flow rates as low as 0.5 gpm and as high as 23 gpm. The superior flow characteristics of this valve provide accurate temperature control to the requirements of ASSE 1017 across the rated flow range. These valves also provide additional safety as they restrict mixed water out to a drip upon loss of cold water supply to the valve. As an added feature, the LF1170, LFL1170 series incorporates integral check valves and filter washers in both the hot and cold water inlets to protect against cross flow. Available with threaded (-UT), solder (-US), PEX Quick-Connect (-QC) or CPVC connections. Maximum Pressure: 150psi (10 bar). Consisting of Lead Free* cast copper silicon alloy body construction.

Product Version: Revit MEP 2014

548 Downloads

Watts Drainage Products FD-540 epoxy coated parking area drain with fabricated steel body and extra heavy duty 24-1/2 in. x 24-1/2 in. (622 x 622mm) two-section ductile iron grate, and noe hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

1038 Downloads

Watts Drainage Products FD-520 epoxy coated side outlet parking area drain with fabricated steel body, extra heavy duty 24-1/2 in. x 24-1/2 in. (622 x 622mm) two-section ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

651 Downloads

Watts BV-300 epoxy coated cast iron ball float backwater valve with removable bronze ring and no hub connections.

No Rating

Product Version: Revit MEP 2014

81 Downloads

The Watts Model LF07S Residential Fire Sprinkler Dual Check Backflow Preventer is designed for non-health hazard [i.e., pollutant] application on potable fire sprinkler service connections to protect against possible backsiphonage conditions that could inadvertently drain the fire sprinkler system.

No Rating

Product Version: Revit MEP 2014

190 Downloads

Ritorno is an elegantly designed and performance engineered indirect post top or wall mounted luminaire. Well suited for pedestrian scale site lighting applications, this fixture offers exceptional uniformity and glare control characteristics. The Ritorno utilizes standard medium base H.I.D. lamps up to 150 watts, 70 or 150 watt T6 Metal Halide, or QL Induction lamps up to 165 watts. Features include high efficiency output, sealed optics, marine grade stainless steel fasteners and a die cast aluminum lamp/ballast chamber with twist lock components for ease of servicing. Please take a look at RITORNO on the TELUS Corporation Project Page to the right.

Product Version: Revit Architecture 2010

6414 Downloads

Ritorno is an elegantly designed and performance engineered indirect post top or wall mounted luminaire. Well suited for pedestrian scale site lighting applications, this fixture offers exceptional uniformity and glare control characteristics. The Ritorno utilizes standard medium base H.I.D. lamps up to 150 watts, 70 or 150 watt T6 Metal Halide, or QL Induction lamps up to 165 watts. Features include high efficiency output, sealed optics, marine grade stainless steel fasteners and a die cast aluminum lamp/ballast chamber with twist lock components for ease of servicing. Please take a look at RITORNO on the TELUS Corporation Project Page to the right.

No Rating

Product Version: Revit Architecture 2010

4616 Downloads

It's very generic but a start. You can change the materials and size. The doors can be open or closed.

No Rating

Product Version: Revit Architecture 2019

970 Downloads

Brass Cleanout Plug

No Rating

Product Version: Revit Structure 2014

105 Downloads

Wall Cleanout with Brass Plug, Stainless Steel Cover

No Rating

Product Version: Revit Structure 2014

96 Downloads

WATTS carrier ISCA-101   Adjusts for the toilet outlet ht and the 'X' dimension

No Rating

Product Version: Revit MEP 2010

1874 Downloads

This is a helical bulb with 26 watts and 1700 lm/w made as close to the real thing as i could, not sure what use you could have, maybe use for track lighting so you dont have to group or something, not sure, comments are welcome

Product Version: Unknown

2506 Downloads

33 12 13.13 CSI Classification

4" Backflow Preventer DCV Assembly based on WATTS 909 NRS

Product Version: Unknown

4539 Downloads

Watts ISCA-101-L/R-T Industry Standard single horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load.

No Rating

Product Version: Revit MEP 2014

70 Downloads

Watts ISCA-101-D-T Industry Standard back-to-back horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load.

No Rating

Product Version: Revit MEP 2014

72 Downloads

This Base Cabinet you can make it a Double or Single door, with glass or without.

family name

Base Cabinet as every parameter on

and the others are starters to help you on how it works.

No Rating

Product Version: Revit Architecture 2019

1945 Downloads

200AMPSERVICEPANEL WMAST

Product Version: Unknown

3957 Downloads

Quick-Connect stackable hose barb unions - polysulfone. 3511B-1008 - 1/2 in. CTS x 1/2 in. Barb

No Rating

Product Version: Revit MEP 2014

189 Downloads

Series FS-500 12 in. (305mm) square x 6 in. (152mm) deep PVC sanitary floor sink with secured grate,and socket outlet.

No Rating

Product Version: Revit Structure 2014

211 Downloads

Series CO-300-R round nickel bronze access cover with concealed mounting flanges and scoriated cover.

No Rating

Product Version: Revit MEP 2014

503 Downloads

Series CO-300-S square nickel bronze access cover with concealed mounting flanges and scoriated cover.

No Rating

Product Version: Revit MEP 2014

982 Downloads

Series RD-290 epoxy coated cast iron scupper drain with flashing clamp, secured flat grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

428 Downloads