 |
Roterra type rainwater collectors are made from the environmentally friendly material polyethylene (PE) and are intended to be buried in the ground.
Roterra 1400 rainwater collectors are available in sizes from 2,200 L to 3,300 L.
Revit Version 2023, 2024, 2025 |
|
Product Version: Unknown
158 Downloads
|
|
 |
Series LF40L, LF40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LF40L has a short thermostat for installation directly in available tank tapings. Model LF40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series LF40L, LF40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar). |
No Rating |
Product Version: Revit MEP 2014
173 Downloads
|
|
|
 |
Fish Tank w/ Cherry Base |
|
Product Version: Unknown
5027 Downloads
|
|
|
 |
Water Table with a picnic like design. Designed for Preschool and under, indoor or outdoor.
Can be used for water or sand
No cover included
Credit to whoever made this originally
|
|
Product Version: Unknown
11492 Downloads
|
|
|
 |
Above Ground Gas Tank |
|
Product Version: Unknown
11938 Downloads
|
|
|
 |
ADA Tank Toilet |
|
Product Version: Revit Building 9.1
35959 Downloads
|
|
|
 |
based on the STEP 2 childrens toy. on off toggle for sand or water, complete with Sand toys and boats on water |
|
Product Version: Revit Architecture 2015
2023 Downloads
|
|
|
 |
This is my first try at it... but it got the job done which is to have a family to connecto to from a single cold water line under sink to hot water service line 1/2" diameter. |
|
Product Version: Revit Structure 2011
16449 Downloads
|
|
|
 |
It has 2 inlets for hot and cold water, and 1 outlet for mixed water.
It is en Revit 2023 |
No Rating |
Product Version: Revit Architecture 2020
146 Downloads
|
|
|
 |
This is a plastic 20 oz water bottle.
Clear plastic with water inside.
White cap. No label. |
|
Product Version: Revit Architecture 2011
17917 Downloads
|
|
|
 |
Water fountain with water coming out |
|
Product Version: Revit Architecture 2009
11411 Downloads
|
|
|
 |
Parametric Air Compessor, the length of the tank varies and it will calculate the storage capacity of the tank for you as well.
also all material have a type parameter assigned. |
No Rating |
Product Version: Revit Architecture 2012
11949 Downloads
|
|
|
 |
Water meter as used by utility network operators, Drainlayers and Plumbers in NZ when connecting potable cold water reticulation to residential and small commerical and industrial buildings for new build work, refurbishment and as the local regulations change to require water meters in more local government jurisdictions.
Manufactured by Arthur D Riley of NZ, this WTD-DRA70 water meter has the "extra tall manifold" (in ground case)
Revit face based model.
Can easily be hosted on Building Pad with a small area in the topography
CBI (NZ) Liquid 71-21 for cold potable water reticulation systems.
Materials include copper for supply in/out, water meter lid (green plastic) and water meter case (generic ABS plastic).
MEP connections for supply In/OUT (25 mm).
Revit 2018 |
No Rating |
Product Version: Unknown
1877 Downloads
|
|
|
 |
This is a Generic Wall based supply Water Valve I made for toilets and sink water supply. |
|
Product Version: Revit Architecture 2012
6011 Downloads
|
|
|
 |
Based upon The AquaClad® modular slimline tank made from Bluescope® steel. |
|
Product Version: Revit Architecture 2014
1204 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 2 bays, 1200wide, 2700 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
1314 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 2 bays, 1200 wide, 3000 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
1183 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 3 bays, 1200 wide, 4100 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
1215 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 4 bays, 1200 wide, 5500 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
1244 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 5 bays, 1200 wide, 5700 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
981 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 5 bays, 1200 wide, 7600 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
1388 Downloads
|
|
|
 |
Model LF10L Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 80,000 BTU/hr. They have a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LF10L is ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar). |
No Rating |
Product Version: Revit MEP 2014
215 Downloads
|
|
|
 |
Hello, being frusterated trying to find a simple water jug, I just made one up super quick and am uploading for anyone who is looking for the same.
Parametric with basic materials/ water.
Very basic, you can alter to suit your tastes. |
No Rating |
Product Version: Revit Architecture 2018
1105 Downloads
|
|
|
 |
|
No Rating |
Product Version: Unknown
2803 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 3 bays, 950/600 wide, 3200/1900 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
955 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 4 bays, 950/600 wide, 4300/2600 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
714 Downloads
|
|
|
 |
Steel tank from UniqueModularTanks, Australia. Rectangular slimline style, in 5 bays, 950/600 wide, 5300/3200 litres. Unhosted Revit component, with switchable inlets and outlets, and full range of Colorbond colours. |
No Rating |
Product Version: Revit Architecture 2008
779 Downloads
|
|
|
 |
Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL Lead Free* Extended Shank Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LFSL100XL is suitable for water heaters with up to 1-3/4 in. (45mm) of insulation. Model LFL100XL is suitable for water heaters with up to 2 in. (51mm) of insulation. Model LFLL100XL is suitable for water heaters with up to 2-1/2 in. (64mm) of insulation. Model LFLLL100XL is suitable for water heaters with up to 3 in. (76mm) of insulation. Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar). |
No Rating |
Product Version: Revit MEP 2014
90 Downloads
|
|
|
 |
Single prop plane with water landing floats |
No Rating |
Product Version: Revit Building 5.1
4768 Downloads
|
|
|
 |
Parametric Termic Sun Panels, water tank, degree elevation, ecc.. |
|
Product Version: Unknown
2248 Downloads
|
|
|
Search