 |
Series LFFBV-3C-SS & LFFBVS-3C-SS 2-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, virgin PTFE seats and thrust washer, and adjustable stem packing gland, stem packing nut, 316 stainless steel ball, Lead Free* copper silicon alloy adapter, and steel handle. Lead Free* construction to complies with Lead Free* installation requirements. |
No Rating |
Product Version: Revit MEP 2014
123 Downloads
|
|
 |
The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line |
No Rating |
Product Version: Unknown
191 Downloads
|
|
|
 |
The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line |
No Rating |
Product Version: Unknown
111 Downloads
|
|
|
 |
Series LFFBV-PEX 2-Piece, Full Port, Lead Free* Brass Ball Valves with PEX Ends are designed for use in PEX piping systems. They feature brass PEX ASTM F-1807 end tailpieces for easy crimping into PEX piping systems, a Lead Free* brass body, chrome plated brass ball, virgin PTFE seats and stem packing, and Viton stem O-ring. Pressure Rating is 400psi WOG. Crimp connection rating is 160psi at 73°F (23°C). |
No Rating |
Product Version: Revit MEP 2014
388 Downloads
|
|
|
 |
Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining stem. The B6000, B6001's standard port orifice ensures minimal pressure drop, while Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model B6000 has threaded NPT end connections and Model B6001 has solder end connections. Pressure Rating: For 1/4 to 3 in. - 600psi WOG (non-shock); 150psi WSP; For 4 in. - 400psi WOG (non-shock); 125psi WSP. |
No Rating |
Product Version: Revit MEP 2010
281 Downloads
|
|
|
 |
MIFAB® Series R1100-F lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring with integral gravel stop, accuflow parabolic weir (specify -F1, -F2, -F3 for one, two or three slots), and standard selflocking polydome strainer with a free area of 43 square inches. |
No Rating |
Product Version: Unknown
188 Downloads
|
|
|
 |
Series LFFBV-4 & LFFBVS-4 2-Piece, Full Port, Brass Ball Valves are suitable for a full range of liquids and gases in residential and commercial applications. These valves feature an adjustable packing for longer service life, a bottom loaded blow-out proof stem for safety, a fluorocarbon elastomer stem O-ring to prevent stem leaking at installation. Lead Free* construction complies with Lead Free* installation requirements. Rated to 600psi WOG and 150psi WSP for 1/4 in. – 2 in. (8 – 50mm) and 400psi WOG and 125psi WSP for the 1/2 in. – 3 in. (65 – 80mm). |
No Rating |
Product Version: Revit MEP 2014
122 Downloads
|
|
|
 |
Series LFB6080 & LFB6081 Lead Free* 2-Piece, Full Port, Copper Silicon Alloy Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features virgin PTFE seats and seals and the full port orifice ensures minimal pressure drop. Virgin PTFE stem packing seal and thrust washer and chrome plated brass ball provide lasting service. Model LFB6080 has threaded NPT end connections and Model LFB6081 has solder end connections. Pressure Rating is 600psi WOG (non-shock) and 150psi WSP. |
No Rating |
Product Version: Revit MEP 2014
139 Downloads
|
|
|
 |
MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
324 Downloads
|
|
|
 |
MIFAB® Series MC-28 lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste, 2” (51) no hub center vent connection and anti-crossover baffles for floor mounted back outlet water closets. |
No Rating |
Product Version: Unknown
33 Downloads
|
|
|
 |
MIFAB® Series R1100-PJ lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring, stainless steel perforated extension and standard 1” (25) thick, 8” (203) square adjustable ductile iron tractor grate. |
No Rating |
Product Version: Unknown
81 Downloads
|
|
|
 |
Dyson Airblade™ Tap 110-120V Hand Dryer - Short AB09 With Airblade technology in a tap, hands can be dried at the sink in 14 seconds. Water isn't dripped on the floor with Dyson Airblade Tap hand dryer because you don't need to move to a separate drying area. Costs less to run and has a small carbon footprint compared to other hand dryers. Dyson Airblade saves space and features touch-free operation. Ideal for minimalistic restrooms, new or fully-refurbished. 11-5/8"W x 11-2/16"D x 6-1/4"H. Stainless steel finish. 5-year parts and 5-year labor limited manufacturers warranty. |
No Rating |
Product Version: Revit Architecture 2018
1232 Downloads
|
|
|
 |
Series 152A Process Steam Pressure Regulators are used in commercial, industrial, and institutional applications to regulate steam pressure in autoclaves, steam tables/irons, vulcanizers and large capacity process services. They are highly sensitive to reduced pressure changes. They have an iron body construction with NPT threaded female inlet and outlet connections, stainless steel strainer, laminated metal diaphragm, and sensitivity adjustment feature for critical flow. Series 152A offers full volume with minimum pressure drop and in-line serviceability. It is ideal for use on sterilizers, process lines, testing fixtures, and oil lines. Tight seating Model 152A-T available for dead end and liquid services. Maximum Supply Pressure: Up to 200psi (13.8 bar). |
No Rating |
Product Version: Revit MEP 2014
300 Downloads
|
|
|
 |
Series LFBP30 Lead Free* Diaphragm Operated Bypass Relief Valves regulate liquid pressure as supplied by a positive pressure pump. These relief valves protect equipment by opening at desired setting and allowing excess volume to be bypassed back to source. They feature Lead Free* cast copper silicon alloy body construction, sensitive rubber diaphragms, and Buna-N discs. The tee handle facilitates pressure change. The spring and adjustment handle are free from contact with the liquid elements being controlled. The maximum temperature for this series is 180 degreeF (82 degreeC). The LFBP30 features Lead Free* construction to comply with Lead Free* installation requirements. |
No Rating |
Product Version: Revit MEP 2014
251 Downloads
|
|
|
 |
MIFAB® Series F1640, 9” (229) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 9” (229) diameter lacquered cast iron adjustable top assembly and special duty ductile iron grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.
(For membrane floors, add Suffix -C for the membrane clamp.) |
No Rating |
Product Version: Unknown
26 Downloads
|
|
|
 |
Series FBV-4 & FBVS-4 2-Piece, Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE. Model FBV-4 has threaded end connections and is NSF & CSA approved. Model FBVS-4 has solder end connections and is NSF approved. Pressure Rating for 1/4 in. ‒ 2 in. (8 ‒ 50mm) is 600psi WOG and 150psi WSP. 2 1/2 in. ‒ 3 in. (65‒80mm) is 400psi WOG and 125psi WSP. |
|
Product Version: Revit MEP 2014
1323 Downloads
|
|
|
 |
The JUAL Angular bowl outlet consists of a bowl which cumulates the water before it is led to the pipe system of the building. The outlet is delivered with standard pipe diametres 50, 63 and 75 mm.The bowl outlet is made from stainless steel and is delivered with Integrated bitumen or foil membrane.
|
No Rating |
Product Version: Revit Architecture 2019
132 Downloads
|
|
|
 |
Series LFB6000 & LFB6001 Lead Free* 2-Piece, Standard Port, copper silicon Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining 316 stainless steel stem and standard port orifice that ensures minimal pressure drop. Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model LFB6000 has threaded NPT end connections and Model LFB6001 has solder end connections. Pressure Rating for 1/4 to 3 in. (8 ‒ 80mm) is 600psi WOG (non-shock) and 150psi WSP. 4 in. (100mm) is 400psi WOG (non-shock) and 125psi WSP. |
No Rating |
Product Version: Revit MEP 2014
120 Downloads
|
|
|
 |
Series FBV-3C & FBVS-3C 2-Piece, Full Port, Brass Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, virgin PTFE seats, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated brass ball, brass adapter, and steel handle. Model FBV-3C has threaded end connections. Model FBV-3C-TH has tee handle with threaded and solder connections. Model FBVS-3C has solder end connections. Pressure Rating for 1/4 in. ‒ 2 in. (8 ‒ 50mm) is 600psi WOG and 150psi WSP. 2 1/2 in. to 4 in. (35 ‒ 100mm) is 400psi WOG and 125psi WSP. |
No Rating |
Product Version: Revit MEP 2014
1306 Downloads
|
|
|
 |
Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
42 Downloads
|
|
|
 |
Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements. |
No Rating |
Product Version: Revit MEP 2014
54 Downloads
|
|
|
 |
MIFAB® SUPER-MAX gravity grease interceptor has a limited lifetime warranty and is made in the U.S.A. out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor is designed for above or below ground installation and includes an adjustable lid system, sample port access, internal baffle, deep seal trap covered by lid, internal air relief by-pass, stainless steel calibrated orifice plate (internal flow control), base for support and floor level installation and 4″ no hub inlet and outlet connections. Steel encased composite lids provide a water / gas tight seal and have a minimum of 20,000 LB. load capacity – in accordance with the loading requirements of AASHTO H20. The high density polyethylene material is PE 3135 from Dow 9.39 with a density of 0.939 g/cm3. The -PDI model is tested and certified to the PDI G-101 Standard, 100 GPM flow rate. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
288 Downloads
|
|
|
 |
A parametric solar thermal collector from Heliotek (Bosch) for use on solar water heating systems with boiler.
Modeled by dufbp, made by Bosch.
Country: Brazil. |
|
Product Version: Revit Architecture 2017
1072 Downloads
|
|
|
 |
"Os filtros de barro estão presentes em muitas casas brasileiras, e de acordo com pesquisas realizadas por cientistas norte-americanos, e publicadas no livro “The Drinking Water Book”, de Colin Ingram, nossos filtros têm, provavelmente, o melhor sistema de purificação de água do mundo." |
No Rating |
Product Version: Revit Architecture 2020
193 Downloads
|
|
|
 |
MIFAB® Series R1200-RS lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and internal dome strainer. |
No Rating |
Product Version: Unknown
29 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 18 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 18 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
548 Downloads
|
|
|
 |
Download: http://nordhem-fi.bimobject.com/LNARE1140
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
Elegant and timeless Nordhem-towel radiators provide the functionality and warmth to the bathroom. Towel warmers are available with the use of water or a network connection to a battery or electrical connection. |
|
Product Version: Unknown
4949 Downloads
|
|
|
 |
Download: http://bimobject.com/en/metraflex/product/flanged_strainer_style_tf_125
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
The Metraflex Y Strainer prevents costly shutdowns and protects your pumps and equipment. Ideal for lower capacity piping systems, the Metraflex Y strainer works for steam, air, water, oil and gas lines. |
|
Product Version: Unknown
2152 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 9 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 9 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 9 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/9-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
229 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 8 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 8 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 8 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
163 Downloads
|
|
|
Search