 |
Series FD-360 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 15-1/2 in. (394mm) diameter adjustable top with heel proof ductile iron grate, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
45 Downloads
|
|
 |
Series FD-460 epoxy coated cast iron area drain with anchor flange, weepholes, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square adjustable top with heel proof ductile iron tractor grate, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
67 Downloads
|
|
 |
Series CA-311 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate with integral mounting brackets, and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
196 Downloads
|
|
 |
Series FD-670 PVC area drain with anchor flange, weepholes, 10-1/8 in. diameter fixed top, heel proof PVC grate secured with vandal proof stainless steel screws, and socket outlet. |
No Rating |
Product Version: Revit MEP 2014
166 Downloads
|
|
 |
Series FD-670 PVC area drain with anchor flange, weepholes, 10-1/8 in. diameter fixed top, heel proof PVC grate secured with vandal proof stainless steel screws, and socket outlet. |
No Rating |
Product Version: Revit MEP 2014
94 Downloads
|
|
 |
Series FD-1100-A epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable round heel proof stainless steel strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
58 Downloads
|
|
 |
Series FD-100-A epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable round heel proof nickel bronze strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
174 Downloads
|
|
 |
Series RD-280 cast iron roof drain with deck flange, drain body, flashing clamp with integral gravel guard, self-locking cast iron dome, and no hub outlet. |
No Rating |
Product Version: Revit MEP 2014
359 Downloads
|
|
 |
Series FD-450-F epoxy coated cast iron area drain with anchor flange, weepholes, 15-5/8 in. x 15-5/8 in. (397mm x 397mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
81 Downloads
|
|
 |
Series FD-660 PVC area drain with anchor flange, weepholes, 7-3/4 in. (197mm) diameter fixed top, heel proof PVC grate secured with vandal proof stainless steel screws, and socket outlet. |
No Rating |
Product Version: Revit MEP 2014
121 Downloads
|
|
 |
Series FD-330 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 8 in. x 8 in. (203 x 203mm) square adjustable top with heel proof ductile iron grate, no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
75 Downloads
|
|
 |
Series FD-450 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 15-5/8 in. x 15-5/8 in. (397 x 397mm) square adjustable top with heel proof ductile iron grate, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
83 Downloads
|
|
 |
Quick-Connect hose barb fittings - polysulfone. 3513B-1008 - 1/2 in. CTS x 1/2 in. Barb 3513B-1412 - 3/4 in. CTS x 3/4 in. Barb 3513B-1816 - 1 in. CTS x 1 in. Barb |
No Rating |
Product Version: Revit MEP 2014
242 Downloads
|
|
 |
Series FD-1100-L epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable heavy duty square heel proof stainless steel strainer, and no hub (standard) outlet |
No Rating |
Product Version: Revit MEP 2014
49 Downloads
|
|
 |
Series FS-800 epoxy coated cast iron sanitary can wash drain with secured nickel bronze grate, stainless steel sediment bucket, spray nozzle assembly with 1/2 in. (13mm) NPT pipe connection, and 4 in. (102mm) no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
275 Downloads
|
|
 |
Under counter Basin with Fixing Accessories Set Size: 555x425x195 mm, Shape : Oval
Vitreous china sanitary ware products are fragile in nature and need to be handled with care (to avoid personal injury) at all times during its storage, handling, installation and use thereafter. The product is heavy and it is recommended that two persons hold it while it is being fixed. Carefully inspect the new product for damage before installation. Risk of product damage. Over tightening may cause breakage or chipping of vitreous china. Risk of external leakage. Do not lift or rock the bowl after placement. Always test your cleaning solution on an inconspicuous area on the product before applying it to the entire surface. Do not allow cleaners to sit or soak on the product. Use a soft, dampened sponge or cloth to clean. Never use abrasive material like a bristle brush or scouring pad. Wipe surfaces clean and rinse completely with water immediately after applying cleaners. Clean Chrome, stainless steel surfaces once a week. Do not use cleaners containing chloride on chrome, stainless steel. If used, rinse the surface immediately to prevent corrosion. Wherever chrome plating is used on the products, use only warm water to clean and then dry with a soft cloth |
No Rating |
Product Version: Revit Architecture 2018
1427 Downloads
|
|
 |
Under counter Basin with Fixing Accessories Set Size: 555x425x195 mm, Shape : Oval
Vitreous china sanitary ware products are fragile in nature and need to be handled with care (to avoid personal injury) at all times during its storage, handling, installation and use thereafter. The product is heavy and it is recommended that two persons hold it while it is being fixed. Carefully inspect the new product for damage before installation. Risk of product damage. Over tightening may cause breakage or chipping of vitreous china. Risk of external leakage. Do not lift or rock the bowl after placement. Always test your cleaning solution on an inconspicuous area on the product before applying it to the entire surface. Do not allow cleaners to sit or soak on the product. Use a soft, dampened sponge or cloth to clean. Never use abrasive material like a bristle brush or scouring pad. Wipe surfaces clean and rinse completely with water immediately after applying cleaners. Clean Chrome, stainless steel surfaces once a week. Do not use cleaners containing chloride on chrome, stainless steel. If used, rinse the surface immediately to prevent corrosion. Wherever chrome plating is used on the products, use only warm water to clean and then dry with a soft cloth |
No Rating |
Product Version: Revit Architecture 2018
692 Downloads
|
|
 |
Series CO-200-U epoxy coated cast iron floor cleanout with 5 in. x 5 in. (127mm) round adjustable gasketed nickel bronze top with terrazzo recess, removable gas tight gaskteded brass cleanout plug and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
117 Downloads
|
|
 |
Series RD-260 combination roof drain/overflow with epoxy coated cast iron drain bodies, flashing clamps with integral gravel guards, 4 in. (102mm) high internal standpipe, self locking polyethylene domes, and no hub (standard) outlets. |
No Rating |
Product Version: Revit MEP 2014
283 Downloads
|
|
 |
Series RD-280-SO cast iron roof drain with deck flange, drain body, flashing clamp with intergral gravel guard, self-locking cast iron dome, and no hub side outlet. |
No Rating |
Product Version: Revit MEP 2014
203 Downloads
|
|
 |
The design of JUAL angular roof outlet is similar to the vertical roof outlet, but the pipe has a 92° angle immediately after the intlet so water is drained horizontally from the roof. The angular roof outlet can be supplied in all standard diametres from 50 mm to 110 mm with various roof membrane types. |
No Rating |
Product Version: Revit Architecture 2019
223 Downloads
|
|
 |
Series FD-810 epoxy coated cast iron garage drain with anchor flange, weepholes, 8 in. (203mm) diameter fixed top with heel proof ductile iron grate, sediment bucket with weepholes, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
58 Downloads
|
|
 |
Series FS-780 12 in. (305mm) square x 6 in. (152mm) deep 14ga. type 304 stainless steel sanitary floor sink with loose set cast stainless steel grate, dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
143 Downloads
|
|
 |
Series FS-790 12 in. (305mm) square x 8 in. (203mm) deep 14ga. type 304 stainless steel sanitary floor sink with loose set cast stainless steel grate, dome bottom strainer, and no hub (standard) outlet. |
No Rating |
Product Version: Revit Structure 2014
89 Downloads
|
|
 |
Series FD-100-H epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable round heel proof nickel bronze strainer with wide flange, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
51 Downloads
|
|
 |
Series FD-100-H epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable round heel proof nickel bronze strainer with wide flange, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
37 Downloads
|
|
 |
Series FD-1160 chemical resistant PVC floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, 6-1/2 in. (165mm) round heel proof adjustable PVC strainer secured with stainless steel screws, and socket outlet |
No Rating |
Product Version: Revit MEP 2014
136 Downloads
|
|
 |
Series CO-200-SX epoxy coated cast iron floor cleanout with 5 in. x 5 in. (127x127mm) square adjustable gasketed heavy duty nickel bronze top, removable gas tight gasketed brass cleanout plug and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
141 Downloads
|
|
 |
Series CO-200-US epoxy coated cast iron floor cleanout with 5 in. x 5 in. (127x127mm) square adjustable gasketed nickel bronze top with terrazzo recess, removable gas tight gasketed brass cleanout plug and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
65 Downloads
|
|
 |
Series CO-1200-R epoxy coated cast iron floor cleanout with 5 in. (127mm) round adjustable gasketed heavy duty stainless steel top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet. |
No Rating |
Product Version: Revit MEP 2014
266 Downloads
|
|