Basic 3D model to give an idea of dimensions and space requirements eg for when fiting within cabinetry

No Rating

Product Version: Unknown

109 Downloads

Wall hosted straight down pipe with RWH

Product Version: Revit Architecture 2011

8399 Downloads

Generic pump one size

Product Version: Revit MEP 2009

2643 Downloads

Haws 204 Series

No Rating

Product Version: Revit MEP 2011

1003 Downloads

All available sizes including (2) ASME models for the largest sizes.

No Rating

Product Version: Revit MEP 2016

1928 Downloads

1000 liter tank on pallets

Product Version: Unknown

5878 Downloads

Kohler 200REOZJD with 620 gallon tank.

No Rating

Product Version: Revit MEP 2010

9289 Downloads

Series LF25AUB-Z3 Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. For versatility, a variety of end connections are available: threaded, solder, PEX, quick-connect, and CPVC with union and double union. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa.

No Rating

Product Version: Revit MEP 2014

202 Downloads

Series LF210-5 Lead Free* Automatic Gas Shutoff Valves are used in gas water heater applications to protect against overheating water in the domestic hot water supply heating system. It is an immersion-type valve that automatically shuts off the gas supply to the heater if the temperature reaches 210°F (99°C). It is a self-contained device that consists of Buna-N disc-to-metal seating, manual reset button to reopen the valve after an automatic shutoff, trip latch assembly, and stainless steel spring seats to close the valve at a controlled temperature. A thermostat with extension tube operates a trip latch in response to water temperature. Design certified by CSA. Models LFL210-5 M2 and LFLL210-5 M2 feature extended shanks for use with water heaters containing extra thick insulation up to 2 1/2 in.

No Rating

Product Version: Revit MEP 2014

282 Downloads

MIFAB® Series MC-24 residential water closet carrier with lacquered cast iron finish, 3” (76) PVC adapter, mounting hardware, threaded rod protectors and polished chrome plated finishing cap nuts

No Rating

Product Version: Unknown

78 Downloads

Your basic Flocculator tank with platform

No Rating

Product Version: Revit MEP 2015

829 Downloads

Tank fermenter for breweries or whatever you need it for.

No Rating

Product Version: Revit Architecture 2018

2827 Downloads

Basic with a couple of size parameters, but gives an idea of space requirements eg for mounting in cabinets etc

No Rating

Product Version: Unknown

677 Downloads

Water Tank INECA

700 lts.

Product Version: Revit Architecture 2012

3017 Downloads

WATTS carrier ISCA-101   Adjusts for the toilet outlet ht and the 'X' dimension

No Rating

Product Version: Revit MEP 2010

1909 Downloads

Pipe sizes included are 4", 6", 8", 10", 12", 14" and 16".  Family is easy to update to add more sizes. 

No Rating

Product Version: Revit Architecture 2019

339 Downloads

Series LF7 Lead Free* Dual Check Valves prevent the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. They have a Lead Free* cast copper silicon alloy body construction, two plastic replaceable check valves, and stainless steel springs. Series LF7 is designed for non-health hazard residential water system containment, continuous pressure applications. It is installed immediately downstream of the residential water meter, in a vertical or horizontal position. Check with local inspection authorities for installation requirements. Minimum Working Pressure: 10psi (69 kPa) Maximum Working Pressure: 150psi (10 bar).

No Rating

Product Version: Revit MEP 2014

149 Downloads

Avalailable Models:

Product Version: Revit MEP 2015

2315 Downloads

Small, non-wall based unit. Size of the box is 1'-0.25" x 6.5" x 3". Has two small valve extrusions on the bottom.

Product Version: Revit Architecture 2011

4042 Downloads

Length: 2950mmHeight: 2170mmWidth: 560mmWeight: 175 Kg (empty)

No Rating

Product Version: Revit MEP 2018

415 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction (1/4 to 2 in.) or FDA approved epoxy coated cast iron (2 1/2 to 3 in.), two in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

343 Downloads

CREDITS: Tom Lima

Just a updated version of his 2018 model

Without major details, only having pipe connections on both ends so it can be placed in any existing pipe.

No Rating

Product Version: Revit MEP 2020

195 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

435 Downloads

Water Pressure Relief Valves

Body Material Ductile Iron

Connection Size 1-1/4" (Threaded Only)

Connection Type ANSI Class 150 Flange, IPS Grooved,

Maximum Working Temperature Water 33°F to 140°F

Working Pressure 250 psi, 300 psi, 400 psi

Product Version: Revit MEP 2013

2911 Downloads

MIFAB® Series MC-25 residential water closet carrier system with lacquered cast iron no hub fitting (specify size and style), lacquered cast iron faceplate, mounting hardware, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

51 Downloads

Series LF3005A Lead Free* Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a male iron pipe thread to solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3005A is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi.

No Rating

Product Version: Revit MEP 2014

386 Downloads

Series 919 Reduced Pressure Zone Assemblies prevent the reverse flow of contaminated water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction, two poppet style check valves, and replaceable check seats, with an intermediate relief valve. Series 919 compact modular design facilitates easy maintenance and assembly access. It is ideal for protection at health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit Structure 2014

119 Downloads

Series LF3007 Lead Free* Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a male iron pipe thread to female solder connection. It consists of a union nut, two tailpieces, and a gasket that separates the tailpieces to prevent an electric current from occurring. Series LF3007 is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi.

No Rating

Product Version: Revit MEP 2014

136 Downloads

MIFAB® Series R1200-R lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

191 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a bronze (1/2 to 2 in) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

416 Downloads