Above Ground Diesel Fuel Tank

Product Version: Revit Structure 2012

7100 Downloads

Product Version: Revit Architecture 2009

722 Downloads

No Rating

Product Version: Revit MEP 2009

651 Downloads

No Rating

Product Version: Revit MEP 2009

946 Downloads

Not an ideal family but serves a purpose

No Rating

Product Version: Unknown

235 Downloads

Series LF100XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature a Lead Free* copper alloy body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LF100XL-8 is also available with 8 in. (200mm) extension thermostat. Series LF100XL is ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

125 Downloads

Product Version: Revit Architecture 2013

2309 Downloads

Product Version: Revit MEP 2010

7852 Downloads

Family design using 2019 version

No Rating

Product Version: Unknown

2544 Downloads

5 kinds of tanks of 25m3 and 50m3

Product Version: Revit Architecture 2016

4743 Downloads

Steel gas cylinder rack for indoor or outdoor storage of 1 compressed gas tank. OSHA, NFPA, UFC, CGA, & Seismic Zone 4 compliant.

This product available for sale on USAsafety.com. Model #: BR1X1FS. http://www.usasafety.com/1x1-gas-cylinder-rack-barricade-1-cylinder-p-55.html

No Rating

Product Version: Revit Architecture 2014

1903 Downloads

Wellington City Council water Toby.

Street - in ground footpath mounted,   old style cast steel manifold/case and hinged lid ,  which contains the below ground mains pressure (town supply/Utility reticulation) cold potable water supply Valve,  to Residential, light commerical and light industrial properties.

Utility Network operator Toby case only - Wellington Water.

CBI (NZ) Liquid 71-21 - cold potable water reticulation systems.

Material for case and lid.

Generic  model,   no MEP connections.

Revit 2018

No Rating

Product Version: Unknown

470 Downloads

10 feet high with a 5'5" diameter. Fully parametric.

Product Version: Revit Architecture 2009

5948 Downloads

This is a typical water cooler. It is not a 3-D model but has all pertinent views (elevation, section, plan)

Product Version: Revit Architecture 2009

1719 Downloads

Series LF560 Mini Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is ideal where a small, economical package is required such as on special industrial process applications, miscellaneous plumbing applications, and OEM equipment. Series LF560 is suitable for water supply pressures up to 300psi (21 bar). The LF560 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

149 Downloads

very comfy water bed that lightly accents really any color scheme

Product Version: Revit Architecture 2012

5471 Downloads

this is a park style water foutain that has a pet dish as well for small animals

No Rating

Product Version: Revit Building 9

6564 Downloads

Series LF123LP Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 200psi (13.8 bar) and may be adjusted from 10 - 30psi (69 - 207 kPa). The standard setting is 30psi (207 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The LF123LP features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

291 Downloads

A simple hand powered water pump. Energy efficient.

Product Version: Unknown

4188 Downloads

Revit 2018 Water Heater Stand_parametric

No Rating

Product Version: Unknown

903 Downloads

Here is a water slide that I designed from this company:

http://www.naturalstructures.com/aquatics_water_over20.shtml

Hope you enjoy!

Product Version: Revit Architecture 2018

4992 Downloads

Series LFN45B-L Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Available with double union threaded or solder end connections. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa).

No Rating

Product Version: Revit MEP 2014

490 Downloads

Series LF1L, LF1XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. They feature an all Lead Free* copper silicon alloy body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and test lever. Series LF1L, LF1XL are CSA listed. Model LF1L has 2 in. (50mm) thermostat and a test lever. Model LF1XL has an extension thermostat. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

97 Downloads

Fully Paremetric, created with Revit Architecture 2009. 

Product Version: Revit Architecture 2009

7369 Downloads

Series LF1L, LF1XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. They feature an all Lead Free* copper silicon alloy body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and test lever. Series LF1L, LF1XL are CSA listed. Model LF1L has 2 in. (50mm) thermostat and a test lever. Model LF1XL has an extension thermostat. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

117 Downloads

Series LF1L, LF1XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. They feature an all Lead Free* copper silicon alloy body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and test lever. Series LF1L, LF1XL are CSA listed. Model LF1L has 2 in. (50mm) thermostat and a test lever. Model LF1XL has an extension thermostat. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

100 Downloads

With all code required vent, fill, supply/return etc connections.

Product Version: Revit MEP 2012

5696 Downloads

Here is a water spigot with customizable materials.

Hope you enjoy!

No Rating

Product Version: Unknown

886 Downloads

Series LFN250 Iron Body Water Pressure Reducing Valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 250psi (17.2 bar) and may be adjusted from 25 - 75psi(172 - 517 kPa). The standard setting is 50psi (345 kPa). All parts are quickly and easily serviceable without removing the valve from the line. The optional bypass feature permits the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply. The LFN250 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

405 Downloads

man pouring water into a pot overflowing with water. just change water material to swimming pool to get realisim

No Rating

Product Version: Revit Architecture 2009

4971 Downloads