Series LFB6780-M1 2-Piece, Full Port, Lead Free* Copper Silicon Alloy Diverter Ball Valves are designed to divert liquids and gases in commercial and industrial applications. The full port orifice ensures minimal pressure drop, while PTFE seats and stainless steel ball provide lasting service. Has threaded NPT end connections. Pressure Rating is 400psi (28 bars) WOG (non-shock) @ 100°F and 125psi (8.6 bars) WSP.

No Rating

Product Version: Revit MEP 2014

153 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

Product Version: Revit Architecture 2010

3626 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

No Rating

Product Version: Revit Architecture 2010

7219 Downloads

Series LFIT6300 & LFIS6301 2-Piece, Full Port, Ball and Waste Lead Free* Copper Silicon Alloy Ball Valves feature a side drain port to drain or vent a downstream line when the valve is in the off position. A full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve. The Lead Free* construction complies with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

764 Downloads

Series LFFBV-3C and LFFBVS-3C Lead Free* 2-Piece, Full Port, Brass Ball Valves are designed for use in commercial and industrial applications for a full range of liquids and gases. They’re constructed for reliable performance with a fluorocarbon elastomer stem O-ring that prevents stem leaks, a bottom-loaded blowout-proof stem, and an adjustable stem packing gland. LFFBV-3C models have threaded end connections. LFFBV-3S have solder end connections. Available in several sizes.

No Rating

Product Version: Revit MEP 2014

134 Downloads

Water Tank INECA

700 lts.

Product Version: Revit Architecture 2012

3005 Downloads

The Pronto!™ FD-190-PR-60 PVC adjustable floor drain offers 1 3/4” pre- and 7/8” post-pour adjustability with an integrated bubble level, two leveling shims and a reversible clamping collar with weepholes to ensure professional results. This floor drain also features an anchor flange, round nickel bronze strainer, and a solvent weld outlet. Options include vandal-proofing, trap primer tapping, a backwater valve, side outlet and a choice of funnels.

No Rating

Product Version: Revit Structure 2014

712 Downloads

Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered.

No Rating

Product Version: Revit MEP 2014

826 Downloads

Series LFB6800 & LFB6801 3-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves feature an in-line maintenance design that offers serviceability of all operating parts without disturbing the rigid pipeline system. Their full port orifice ensures maximum flow capacity. Durafill seats, and stainless steel ball and stem provide maximum safety and highest operating pressure and temperature limits. Lead Free* construction complies with Lead Free* installation requirements.

Product Version: Revit MEP 2014

231 Downloads

Series LFFBV-3C and LFFBVS-3C Lead Free* 2-Piece, Full Port, Brass Ball Valves are designed for use in commercial and industrial applications for a full range of liquids and gases. They’re constructed for reliable performance with a fluorocarbon elastomer stem O-ring that prevents stem leaks, a bottom-loaded blowout-proof stem, and an adjustable stem packing gland. LFFBV-3C models have threaded end connections. LFFBV-3S have solder end connections. Available in several sizes.

No Rating

Product Version: Revit MEP 2014

109 Downloads

Series B6400 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It comes standard with actuator mounting pads and the port orifice ensures minimal pressure drop. Durafill seats, blowout proof pressure retaining stem, and chrome plated brass ball provide lasting service. Pressure Rating for 1/4 ‒ 2 in. (8 ‒ 50mm) is 600psi WOG (non-shock) and 150psi WSP. Rating for 2 1/2 in. ‒ 4 in. (65 ‒ 100mm) is 400psi WOG (non-shock) and 125psi WSP.

No Rating

Product Version: Revit MEP 2014

743 Downloads

MIFAB® BIG-O Series HDPE rotational molded oil interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), internal air relief by-pass, adjustable oil draw-off assembly (1 1/2″) on each side, double vent connections (3″) on each side, sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20

No Rating

Product Version: Revit Architecture 2020

229 Downloads

Series LFFBV 2-Piece, Full Port, Lead Free* Bronze Ball Valves comply with MSS-SP-110 and feature a blowout proof stem and virgin PTFE seats. The full port design ensures maximum flow capacity and minimal pressure drop. Lead Free* construction complies with Lead Free* installation requirements. Has threaded NPT end connections. Pressure Rating is 600psi WOG/150psi WSP for 1/4 in. – 2 in. (8 – 50mm) and 400psi WOG/125psi WSP 2 1/2 in. – 3 in. (65 – 80mm).

No Rating

Product Version: Revit MEP 2014

745 Downloads

Series LFFBV-3C-SS & LFFBVS-3C-SS 2-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, virgin PTFE seats and thrust washer, and adjustable stem packing gland, stem packing nut, 316 stainless steel ball, Lead Free* copper silicon alloy adapter, and steel handle. Lead Free* construction to complies with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

123 Downloads

The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line

No Rating

Product Version: Unknown

185 Downloads

The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line

No Rating

Product Version: Unknown

106 Downloads

Series LFFBV-PEX 2-Piece, Full Port, Lead Free* Brass Ball Valves with PEX Ends are designed for use in PEX piping systems. They feature brass PEX ASTM F-1807 end tailpieces for easy crimping into PEX piping systems, a Lead Free* brass body, chrome plated brass ball, virgin PTFE seats and stem packing, and Viton stem O-ring. Pressure Rating is 400psi WOG. Crimp connection rating is 160psi at 73°F (23°C).

No Rating

Product Version: Revit MEP 2014

386 Downloads

Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining stem. The B6000, B6001's standard port orifice ensures minimal pressure drop, while Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model B6000 has threaded NPT end connections and Model B6001 has solder end connections. Pressure Rating: For 1/4 to 3 in. - 600psi WOG (non-shock); 150psi WSP; For 4 in. - 400psi WOG (non-shock); 125psi WSP.

No Rating

Product Version: Revit MEP 2010

277 Downloads

MIFAB® Series R1100-F lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring with integral gravel stop, accuflow parabolic weir (specify -F1, -F2, -F3 for one, two or three slots), and standard selflocking polydome strainer with a free area of 43 square inches.

No Rating

Product Version: Unknown

185 Downloads

MIFAB® Series MI-NEUT solid construction seamless polyethylene body with inlet and outlet, optional vent connections, acid resistant epoxy coated bolted down neoprene gasketed lid, stainless steel hardware. The tank is filled with neutralization medium, lump limestone 1” to 3” diameter size, water is then added to the tank to help dilution.

Product Version: Unknown

158 Downloads

Series LFFBV-4 & LFFBVS-4 2-Piece, Full Port, Brass Ball Valves are suitable for a full range of liquids and gases in residential and commercial applications. These valves feature an adjustable packing for longer service life, a bottom loaded blow-out proof stem for safety, a fluorocarbon elastomer stem O-ring to prevent stem leaking at installation. Lead Free* construction complies with Lead Free* installation requirements. Rated to 600psi WOG and 150psi WSP for 1/4 in. – 2 in. (8 – 50mm) and 400psi WOG and 125psi WSP for the 1/2 in. – 3 in. (65 – 80mm).

No Rating

Product Version: Revit MEP 2014

121 Downloads

Series LFB6080 & LFB6081 Lead Free* 2-Piece, Full Port, Copper Silicon Alloy Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features virgin PTFE seats and seals and the full port orifice ensures minimal pressure drop. Virgin PTFE stem packing seal and thrust washer and chrome plated brass ball provide lasting service. Model LFB6080 has threaded NPT end connections and Model LFB6081 has solder end connections. Pressure Rating is 600psi WOG (non-shock) and 150psi WSP.

No Rating

Product Version: Revit MEP 2014

136 Downloads

MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use.

No Rating

Product Version: Unknown

316 Downloads

MIFAB® Series MC-28 lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste, 2” (51) no hub center vent connection and anti-crossover baffles for floor mounted back outlet water closets.

No Rating

Product Version: Unknown

32 Downloads

MIFAB® Series R1100-PJ lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring, stainless steel perforated extension and standard 1” (25) thick, 8” (203) square adjustable ductile iron tractor grate.

No Rating

Product Version: Unknown

78 Downloads

Dyson Airblade™ Tap 110-120V Hand Dryer - Short AB09 With Airblade technology in a tap, hands can be dried at the sink in 14 seconds. Water isn't dripped on the floor with Dyson Airblade Tap hand dryer because you don't need to move to a separate drying area. Costs less to run and has a small carbon footprint compared to other hand dryers. Dyson Airblade saves space and features touch-free operation. Ideal for minimalistic restrooms, new or fully-refurbished. 11-5/8"W x 11-2/16"D x 6-1/4"H. Stainless steel finish. 5-year parts and 5-year labor limited manufacturers warranty.

No Rating

Product Version: Revit Architecture 2018

1223 Downloads

Series 152A Process Steam Pressure Regulators are used in commercial, industrial, and institutional applications to regulate steam pressure in autoclaves, steam tables/irons, vulcanizers and large capacity process services. They are highly sensitive to reduced pressure changes. They have an iron body construction with NPT threaded female inlet and outlet connections, stainless steel strainer, laminated metal diaphragm, and sensitivity adjustment feature for critical flow. Series 152A offers full volume with minimum pressure drop and in-line serviceability. It is ideal for use on sterilizers, process lines, testing fixtures, and oil lines. Tight seating Model 152A-T available for dead end and liquid services. Maximum Supply Pressure: Up to 200psi (13.8 bar).

No Rating

Product Version: Revit MEP 2014

298 Downloads

Series LFBP30 Lead Free* Diaphragm Operated Bypass Relief Valves regulate liquid pressure as supplied by a positive pressure pump. These relief valves protect equipment by opening at desired setting and allowing excess volume to be bypassed back to source. They feature Lead Free* cast copper silicon alloy body construction, sensitive rubber diaphragms, and Buna-N discs. The tee handle facilitates pressure change. The spring and adjustment handle are free from contact with the liquid elements being controlled. The maximum temperature for this series is 180 degreeF (82 degreeC). The LFBP30 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

250 Downloads

MIFAB® Series F1640, 9” (229) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 9” (229) diameter lacquered cast iron adjustable top assembly and special duty ductile iron grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.

(For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

26 Downloads

Series FBV-4 & FBVS-4 2-Piece, Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE. Model FBV-4 has threaded end connections and is NSF & CSA approved. Model FBVS-4 has solder end connections and is NSF approved. Pressure Rating for 1/4 in. ‒ 2 in. (8 ‒ 50mm) is 600psi WOG and 150psi WSP. 2 1/2 in. ‒ 3 in. (65‒80mm) is 400psi WOG and 125psi WSP.

Product Version: Revit MEP 2014

1309 Downloads