Parametric Lab Sink family with Options for Cold water and Hot water types..U can change the sizes..

No Rating

Product Version: Unknown

2357 Downloads

Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL Lead Free* Extended Shank Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LFSL100XL is suitable for water heaters with up to 1-3/4 in. (45mm) of insulation. Model LFL100XL is suitable for water heaters with up to 2 in. (51mm) of insulation. Model LFLL100XL is suitable for water heaters with up to 2-1/2 in. (64mm) of insulation. Model LFLLL100XL is suitable for water heaters with up to 3 in. (76mm) of insulation. Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

90 Downloads

Product Version: Revit MEP 2009

989 Downloads

Reference Model: Europa Noblesse Flex

Parametric materials.

Made entirely with Revit tools.

No Rating

Product Version: Revit Architecture 2019

324 Downloads

Green building solution for hydropowered home. I used concrete massing for a penstock then created this waterwheel to hook up to generators.

Product Version: Revit Architecture 2009

1876 Downloads

MIFAB® CL Series (specify size) piston operated water hammer arrestor with hard drawn seamless “K” copper body, RYTON PPS piston with double o-rings (Parco # 5778-80) and CDA 360 brass M.P.T. connection. Certified to the A.S.S.E. 1010-1996 and ANSI A112.26.1M Standards. Engineered to limit the system surge pressure up to 1,500 P.S.I.G.

No Rating

Product Version: Unknown

119 Downloads

Pack of Open 3/4 900mm water/dry slide for playground or theme/water park.Consisting 30,45,60 degree slide.

No Rating

Product Version: Revit Architecture 2018

2272 Downloads

Very Long Pond, but dimensions can be adjusted in family editor.

Product Version: Revit Structure 2018

5216 Downloads

Basic 3D model to give an idea of dimensions and space requirements eg for when fiting within cabinetry

No Rating

Product Version: Unknown

106 Downloads

Wall hosted straight down pipe with RWH

Product Version: Revit Architecture 2011

8357 Downloads

Generic pump one size

Product Version: Revit MEP 2009

2628 Downloads

Haws 204 Series

No Rating

Product Version: Revit MEP 2011

999 Downloads

All available sizes including (2) ASME models for the largest sizes.

No Rating

Product Version: Revit MEP 2016

1897 Downloads

Series LF25AUB-Z3 Lead Free* Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. For versatility, a variety of end connections are available: threaded, solder, PEX, quick-connect, and CPVC with union and double union. Standard pressure setting is 50psi with an adjustable range of 25 ‒ 75psi (172 ‒ 517 kPa.

No Rating

Product Version: Revit MEP 2014

198 Downloads

Series LF210-5 Lead Free* Automatic Gas Shutoff Valves are used in gas water heater applications to protect against overheating water in the domestic hot water supply heating system. It is an immersion-type valve that automatically shuts off the gas supply to the heater if the temperature reaches 210°F (99°C). It is a self-contained device that consists of Buna-N disc-to-metal seating, manual reset button to reopen the valve after an automatic shutoff, trip latch assembly, and stainless steel spring seats to close the valve at a controlled temperature. A thermostat with extension tube operates a trip latch in response to water temperature. Design certified by CSA. Models LFL210-5 M2 and LFLL210-5 M2 feature extended shanks for use with water heaters containing extra thick insulation up to 2 1/2 in.

No Rating

Product Version: Revit MEP 2014

277 Downloads

Basic with a couple of size parameters, but gives an idea of space requirements eg for mounting in cabinets etc

No Rating

Product Version: Unknown

650 Downloads

Model LF10L Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 80,000 BTU/hr. They have a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LF10L is ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

215 Downloads

Based upon The AquaClad® modular slimline tank made from Bluescope® steel.

Product Version: Revit Architecture 2014

1195 Downloads

No Rating

Product Version: Revit Architecture 2014

2478 Downloads

Standard No can be on/off

Product Version: Revit MEP 2018

3325 Downloads

Pipe sizes included are 4", 6", 8", 10", 12", 14" and 16".  Family is easy to update to add more sizes. 

No Rating

Product Version: Revit Architecture 2019

326 Downloads

Series LF7 Lead Free* Dual Check Valves prevent the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. They have a Lead Free* cast copper silicon alloy body construction, two plastic replaceable check valves, and stainless steel springs. Series LF7 is designed for non-health hazard residential water system containment, continuous pressure applications. It is installed immediately downstream of the residential water meter, in a vertical or horizontal position. Check with local inspection authorities for installation requirements. Minimum Working Pressure: 10psi (69 kPa) Maximum Working Pressure: 150psi (10 bar).

No Rating

Product Version: Revit MEP 2014

149 Downloads

A non-parametric Slim Line Rain Water Tank based off this model - HERE. Dimensions are not parametric but the material is parametric. Created in Revit 2015 Student Version, Enjoy!

Dimensions;Length: 2100mmWidth: 680mmHeight: 1680mmCapacity: 2100L 

Product Version: Unknown

3890 Downloads

Avalailable Models:

Product Version: Revit MEP 2015

2295 Downloads

Small, non-wall based unit. Size of the box is 1'-0.25" x 6.5" x 3". Has two small valve extrusions on the bottom.

Product Version: Revit Architecture 2011

4023 Downloads

Series LF100XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature a Lead Free* copper alloy body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LF100XL-8 is also available with 8 in. (200mm) extension thermostat. Series LF100XL is ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

123 Downloads

Armario Platium feito sobre medida.Facil de alterar.

Product Version: Revit Architecture 2012

16797 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction (1/4 to 2 in.) or FDA approved epoxy coated cast iron (2 1/2 to 3 in.), two in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

342 Downloads

CREDITS: Tom Lima

Just a updated version of his 2018 model

Without major details, only having pipe connections on both ends so it can be placed in any existing pipe.

No Rating

Product Version: Revit MEP 2020

188 Downloads

Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

429 Downloads