Series LF127W High Capacity Water Pressure Reducing Valves are used in commercial and industrial applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. They have a Lead Free* bronze body construction with NPT threaded inlet and outlet connections, replaceable stainless steel seat, and high temperature resisting interchangeable diaphragm chamber. Maximum Working Pressure: 175psi (12.1 bar), Adjustable Reduced Pressure Range: 25 to 100psi (1.7 to 7 bar).

No Rating

Product Version: Revit MEP 2014

117 Downloads

Filtrine Model ES-6-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (6) Gal. storage tank. Serves a population of (300), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

919 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

4154 Downloads

Annotative GRP Water Tank - Revit Version 2022

No Rating

Product Version: Unknown

613 Downloads

Simple roof hosted solar hot water sysytem

Product Version: Revit Building 9

3735 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

1369 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

7229 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

3259 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

5343 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

Product Version: Revit Architecture 2014

3760 Downloads

Series LF1170, LFL1170 Lead Free* Hot Water Temperature Control Valves are specifically designed for mixing hot and cold water on hot water supply systems. They can be used for a variety of applications to reduce the temperature of the hot water from the system, and are ideal for radiant heat applications. This series features a "double throttling" design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber. The LF1170 can be set to any temperature between 90°F and 160°F (60°F and 120°F for model LFL1170-M2) with flow rates as low as 0.5 gpm and as high as 23 gpm. The superior flow characteristics of this valve provide accurate temperature control to the requirements of ASSE 1017 across the rated flow range. These valves also provide additional safety as they restrict mixed water out to a drip upon loss of cold water supply to the valve. As an added feature, the LF1170, LFL1170 series incorporates integral check valves and filter washers in both the hot and cold water inlets to protect against cross flow. Available with threaded (-UT), solder (-US), PEX Quick-Connect (-QC) or CPVC connections. Maximum Pressure: 150psi (10 bar). Consisting of Lead Free* cast copper silicon alloy body construction.

Product Version: Revit MEP 2014

590 Downloads

Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

42 Downloads

Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

54 Downloads

Filtrine Model ES-2-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

756 Downloads

Filtrine Model ES-4-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-200' via recirculating drinking water loop. (4) Gal. storage tank. Serves a population of (200), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

567 Downloads

Filtrine Model ES-8-RFC-FS - Remote free-standing recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (8) Gal. storage tank. Serves a population of (400), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

691 Downloads

22 05 19 CSI Classification

3" Water Meter based on HERSEY METER MVR350

Product Version: Revit MEP 2009

10136 Downloads

22 05 19 CSI Classification

6" Water Meter based on HERSEY METER MVR1300

Product Version: Revit MEP 2009

4101 Downloads

22 05 19 CSI Classification

4" Water Meter based on HERSEY METER MVR650

Product Version: Revit MEP 2009

3721 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

Product Version: Revit Architecture 2014

7935 Downloads

Annotative GRP Water Tank - Revit Version 2022

No Rating

Product Version: Unknown

843 Downloads

Green Water Tower

Product Version: Unknown

9581 Downloads

Vitamin water Revive

No Rating

Product Version: Unknown

1407 Downloads

Water glass for banquet settings

Product Version: Revit Architecture 2011

7886 Downloads

water in the tank

No Rating

Product Version: Revit Architecture 2009

8736 Downloads

Water slide with tunnel and ladder

Product Version: Revit Architecture 2010

12753 Downloads

Water tanks - Australasia - So many shapes and sizes. The few here are just a few used here.

No Rating

Product Version: Revit Architecture 2014

1497 Downloads

Basic fully recessed water cooler with compressor and wall cut out. 3D Fine and 2D Medium and Coarse views. Loosely based on Elkay RC8A.

No Rating

Product Version: Unknown

5086 Downloads

an instant hot water unit based on Rinnai mounted in wall cavity

non-parametric 2013

No Rating

Product Version: Unknown

2346 Downloads

Solar Hot Water Collector-Evacuated Tube,  Parametric width changes no of tubes

No Rating

Product Version: Revit Architecture 2009

4001 Downloads