A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

No Rating

Product Version: Revit Architecture 2020

303 Downloads

ARNE JACOBSEN wall lamp

Product Version: Unknown

14737 Downloads

Profile for Porch Rack to be used with 10" Tuscan Column.  Use it to build a wall sweep.  When moved out from wall, it can be mitered to return against the building.

No Rating

Product Version: Revit Architecture 2009

1050 Downloads

Manufacturers Write Up:

The Kioto 16 wall or ceiling light from Domus has been designed by Domus Team. This wall or ceiling mounted luminaire is great for fluorescent lighting. The kioto is composed of a shade in Lunopal. Lunopal is a transparent material that has the appearance of Japanese paper and consists of compressed polycarbonate fibers. This fixture is also constructed from premium wood in a beech/beech wood or beach black mix finish. Can be mounted either built-on or built-in. The neckline is 62,5 x 62,5 cm. DOMUS lamps are developed in a teamwork approach. Designers, wood experts, design engineers, and lighting designers create products to serve their users. All are working to create high quality, long-lived products from the very best of raw materials. Each individual lamp is hand-made and subsequently subjected to stringent quality controls.

Product Version: Revit Architecture 2010

18568 Downloads

Double action double door (metric), using Pacific Doors DA steel frame (NZ).  Internal use.  Parametric vision panels

No Rating

Product Version: Revit Architecture 2009

25863 Downloads

Single flush Door hollow metal, with two types of door panels (Glass,Louver) and frames (Single rabbet, Double rabbet), fully parametric, textured_Family Types Catalog in attachment. Graphical representation of fire rating is included.

Product Version: Revit Architecture 2012

6894 Downloads

Genric floor based Sleeve for floor slabs, Parametric for Outside and inside radius plus wall thickness and material. The familiy has an Invisable line in it, so if its buried under a wall then the circle will show through allowing you to see sleeves in chases or in the center of walls

Product Version: Revit Architecture 2009

2393 Downloads

Wall Mount Cabinet Modified to show dashed outline of an Ironing board in Floor Plan and to allow it to be recessed into wall.

Product Version: Revit Architecture 2009

8029 Downloads

Spindle piece to make into a curtain panel

No Rating

Product Version: Unknown

274 Downloads

Unit is 36" wide, 80" tall' 16" deep

Product Version: Revit Architecture 2015

812 Downloads

there is no specified height for trellis but can be modified and move..

Product Version: Revit Architecture 2009

3956 Downloads

Download: https://bimobject.com/en/hyllteknik-en/product/pvsmphp  

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

The permanent wall system is strong, simple and flexible. The wall rail is mounted vertically on the wall and have perforated holes all the way for easy height adjustment of the brackets and shelf ends. It is an easy and affordable shelving suitable for storage in the storage and archives. But with a little imagination and creative choices of material the wall rails also can be used where the appearance is high. Metal shelf Paper is stylish and strong, despite the way the paper-thin appearance. Choose powder coated colors from our catalog.

Product Version: Unknown

10754 Downloads

Kitchen for small spaces with wine-cooler and sink

Product Version: Revit Building 9.1

22167 Downloads

Input the time into the clock and it will move the hands to the position that it should be in. 

No Rating

Product Version: Revit Architecture 2011

1371 Downloads

for gabion walls, allows light to penetrate through
(a la Herzog+de Mueron's Napa Winery)

Product Version: Unknown

18596 Downloads

Versatile, and customizable. Works on a seamless pattern

Product Version: Unknown

13649 Downloads

For leading cables through the roof membrane on flat roofs in a watertight manner. E.g. at solar panels, air conditioners and other electrical equipment.

No Rating

Product Version: Revit Architecture 2019

45 Downloads

This fountain is not parametric, nor is it especially ornate, but it can be a placeholder and is easily editable through the modification of its sweeps and extrusions.

Product Version: Revit Architecture 2016

6504 Downloads

projects diagonally with 8 hanger stops

No Rating

Product Version: Unknown

2491 Downloads

Modeled in Revit LT 2024 for Malaysian Standards

No Rating

Product Version: Unknown

729 Downloads

Modeled in Revit LT 2024 for Malaysian Standards

No Rating

Product Version: Unknown

289 Downloads

Based on Greenheck model WC

Product Version: Revit MEP 2009

1278 Downloads

alumninum frame - existing plan profile

No Rating

Product Version: Unknown

6512 Downloads

Scupper - Thru-Wall - Adjusts with wall widths

No Rating

Product Version: Unknown

3274 Downloads

This is my 1st attempt at a family. I could not get the electrical connection to move to the right place. I have the supply and exhaust correctly placed.

No Rating

Product Version: Revit Architecture 2012

4288 Downloads

Folding Glazed Panel door. Parametric Number of Panels Parametric Number of Awning highlights Parametric width, height, frame thickness, Materials by Catagory

Product Version: Revit Architecture 2008

16395 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

4922 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

5164 Downloads

clock hands adjustable

Product Version: Unknown

4951 Downloads

All the colors of Curtain Walls

Product Version: Revit Architecture 2009

23264 Downloads