alumninum frame - existing plan profile

No Rating

Product Version: Unknown

6512 Downloads

Scupper - Thru-Wall - Adjusts with wall widths

No Rating

Product Version: Unknown

3274 Downloads

Inside Face of Panels is circumscribed to the radial array. Fully parametric.

No Rating

Product Version: Unknown

852 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

4922 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

5164 Downloads

clock hands adjustable

Product Version: Unknown

4951 Downloads

All the colors of Curtain Walls

Product Version: Revit Architecture 2009

23264 Downloads

its fully parametric that you can control no of arrays , void thickness , height and width of element .

No Rating

Product Version: Revit Architecture 2017

1392 Downloads

Vektor luminaires offer a symbiosis of design integrity with time-tested simplicity. Stainless-steel, aerodynamic shape is the perfect complement for many urban and corporate streetscapes and plazas. Available in two sizes for H.I.D. lamping from 50W to 400W. Standard with stainless steel fasteners and a sealed optic system behind a tempered glass lens, Vektor luminaires are made to endure the tests of time. Tool-less stainless steel door provides for easy maintenance.Choice of many pole options, mounting arm configurations including wall mount option. Vektor luminaires provide IDA-certified "Dark Sky Friendly" Full Cutoff performance and are available in Type II, Type III and Type V distributions. Selux application engineering can provide detailed layout drawings and calculations for your next installation.

No Rating

Product Version: Revit Architecture 2010

3776 Downloads

Vektor luminaires offer a symbiosis of design integrity with time-tested simplicity. Stainless-steel, aerodynamic shape is the perfect complement for many urban and corporate streetscapes and plazas. Available in two sizes for H.I.D. lamping from 50W to 400W. Standard with stainless steel fasteners and a sealed optic system behind a tempered glass lens, Vektor luminaires are made to endure the tests of time. Tool-less stainless steel door provides for easy maintenance.Choice of many pole options, mounting arm configurations including wall mount option. Vektor luminaires provide IDA-certified "Dark Sky Friendly" Full Cutoff performance and are available in Type II, Type III and Type V distributions. Selux application engineering can provide detailed layout drawings and calculations for your next installation.

No Rating

Product Version: Revit Architecture 2010

1773 Downloads

The hollow metal frame will wrap around the wall and will automatically adjust to the wall width.  The door swing angle can be adjusted in the "instance".

Product Version: Revit Architecture 2011

16832 Downloads

Model based on a Fleetwood group item meant for learning walls in classrooms

Product Version: Unknown

1739 Downloads

A commercial precast window sill that FINALLY cuts the wall correctly, unlike typical wall sweeps, and that can be used in both window families and projects

Product Version: Revit Architecture 2015

12205 Downloads

Face Based external CCTV Camera with housing and bracket. Angle parameter rotates symbol as well as geometry.

Product Version: Revit MEP 2011

17098 Downloads

Model based on a Fleetwood Group item meant for learning walls in classrooms.

No Rating

Product Version: Unknown

776 Downloads

BVN AIR

PLASTIC RADIAL BATH & TOILET ASPIRATOR

PLASTİK RADYAL BANYO & TUVALET ASPİRATÖRÜ

Product Version: Revit Architecture 2016

750 Downloads

This family has been in the works for some time now. It has a steel door frame that embeds itself in the concrete, cuts the wall as needed and had the door panel.  The door frame also adjusts itself to wall thicknesses

Product Version: Revit Building 9.1

2579 Downloads

This Glass and Steel Awning utilizes 3 components to set the piece up. All are generic wall based components so they will need a wall backing for them to work.

Awning Frames - is actually just the beam that sits against the wall

Awning Beams - is the module used to fill in the awning.

Awning Beams w-Tension Rods - To show the Tension rod structure at the ends and intermediate as you choose

The canopy's are parametric in "beam to beam" width and material properties but not in length or any others. If you want to modify them fix them in families or build your own ; )

Product Version: Revit Architecture 2014

7212 Downloads

Simple, parametric window trim. Hosts on wall and cuts wall with void. 

Product Version: Unknown

2434 Downloads

A line based family which is a work in progress, however this is a parametric component that can be graphically shown open or closed

Product Version: Revit Architecture 2009

14055 Downloads

Parametric wall end guard w/ adjustable wall width, leg dimensions and material

No Rating

Product Version: Revit Architecture 2009

827 Downloads

Face-based family for rock climbing hold.  The family has (5) types of holds built in.  Each type has parameter-based material overrides.  You can place these on a wall (use space to rotate the family while placing) to quickly create the feeling of a climbing wall.

Please note, these shapes are not based on any real climbing hold sizes or forms-- just to get the general idea across quickly in your model if needed.

Keywords: Rock climbing, climbing, wall, gym, climbing hold, hold

Created in Revit Architecture 2019

Product Version: Unknown

14264 Downloads

MIFAB® Series MC-56-LP exposed arms for wall mounted lavatory with white, lacquered, adjustable, cast iron exposed support arms. Complete with fixture leveling and mounting hardware.

No Rating

Product Version: Unknown

35 Downloads

9"-15"-6" (Editable)

Stainless Steel

No Rating

Product Version: Unknown

2852 Downloads

780 x 1400mm top-hung roof window over 780 x 920mm fixed roof window with flashing and blind set in generic 300mm roof.

This Revit family is now superseded.

Please visit www.velux.co.uk for latest BIM information

Product Version: Revit Architecture 2008

14727 Downloads

This is a wall-hosted shower stall that cuts an opening into the host wall.

Only suited for 2d plans, elevations, and sections as it is composed of flat DXF files. 3d volume is included only for clash detection.

Does not render.

No Rating

Product Version: Revit Architecture 2011

846 Downloads

Simplified Family with Mainn Breaker Switch, Multi meter and RYB Pahse Indicators

Varuos sizes available for 6 Way to 12 Way 

Wall Mounted Family

No Rating

Product Version: Revit MEP 2019

327 Downloads

The hollow metal frame will wrap around the wall and will automatically adjust to the wall width.  The door swing angle can be adjusted in the "instance".

Product Version: Revit Architecture 2011

15198 Downloads

False Ceiling Quotation/ Design/ Installation/ Technical Support;

Web: wingyipengineering.com

Email: Wingyip@wingyipeng.com

Tel: 3124 1222  W. S. Chan ( Tony )

No Rating

Product Version: Revit Architecture 2019

584 Downloads

-Parameters: Width, Depth, Elevation

-Smooth,Curved Corners

-Ready to Render

-Architectural Fixture only (Not for MEP)

-Modeller: Christian Basiya 

-URL:https://www.upwork.com/o/profiles/users/_~01a0a483b625278bca/

No Rating

Product Version: Unknown

842 Downloads