MIFAB® Series R1200-R lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

191 Downloads

With hot tub

Underground

Fits in 25' by 15' area

Product Version: Revit Architecture 2011

6627 Downloads

MIFAB® Series R1260 lacquered cast iron extra deep sump high flow roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

59 Downloads

MIFAB Series C1460-S (select model number) lacquered cast iron cleanout with large access area, tapered thread plug and square (specify cover size, either 7” x 7” or 9” x 9”), smooth nickel bronze access panel with allen key screwsand anchor frame with mounting lugs.

No Rating

Product Version: Unknown

21 Downloads

MIFAB® Series R1200-HC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, adjustable extension with auxiliary drainage slots, secondary clamp, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

46 Downloads

MIFAB® Series F1510 lacquered cast iron floor drain with deep sump body, wide anchor flange, weepholes, and adjustable collar with square heavy duty ductile iron hinged tractor grate with four piece surface membrane clamp, sediment bucket and free area of 51 in² (32,903²).

No Rating

Product Version: Unknown

211 Downloads

MIFAB® Series R1100-JC lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 43 square inches.

No Rating

Product Version: Unknown

109 Downloads

Out of the box Revit Wide Flange family with spray on fireproofing added! After a long time of waiting to get to this, I finally did and decided to share because it seems unavailable anywhere else online. It appears to be a highly requested family throughout a lot of forums.

Parameters include, SOFP thickness, Visibility ON/OFF, & SOFP Realistic material. Family can be flexed and does not slow more complex framed structures significantly.

Visible in plan, 3D etc. Sections nicely as well. Great for wall firestopping & MEP coordination.

SOFP will adjust to any size beam selected and will also adjust to medium/fine detail level.

In order for this family to work properly, it’s imperative, the type catalog is located within the same folder as the family. I would suggest keeping them in the default directory together:

C:\ProgramData\Autodesk\RVT 2018\Libraries\US Imperial\Structural Framing\Steel

SOFP material JPG should be loaded into default materials directory as well:

C:\Program Files (x86)\Common Files\Autodesk Shared\Materials\Textures\3\Mats

Hope this is helpful and you enjoy for free! Family was created in RVT2018 but can be upgraded.

No Rating

Product Version: Revit Architecture 2018

860 Downloads

MIFAB® Series R1150 combined roof drain and secondary overflow system, consisting of a galvanized sump receiver; two lacquered cast iron roof drain bodies with anchor flanges, cast iron waterproofing membrane clamp rings with integral gravel stops, one 4” (102) diameter adjustable ABS overflow standpipe and two self-locking metal dome strainers with a free area of 43 square inches each.

No Rating

Product Version: Unknown

1151 Downloads

Baggage - Luggage - Suitcase cart / trolley for taxfree shopping area in airport or trainstations.

It has parameters for materials.

This was made in Revit Architecture 2012

Product Version: Revit Architecture 2011

3772 Downloads

MIFAB® Series R1200-PR15” lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, square adjustable collar and standard 15” (381) square ductile iron tractor grate with 3/8” (9) maximum width drainage slots and a free area of 80 square inches.

No Rating

Product Version: Unknown

171 Downloads

MIFAB® Series R1250 lacquered cast iron extra deep sump high flow roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

76 Downloads

MIFAB® Series R1200-G lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

71 Downloads

MIFAB® Series R1200-JC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches.

No Rating

Product Version: Unknown

61 Downloads

MIFAB® Series Series R1270 combined large sump roof drain and secondary overflow system; consisting of 24” x 42 “ galvanized sump receiver, two lacquered cast iron roof drain bodies with 15” diameter anchor flange, cast iron waterproofing membrane clamp rings with integral gravel stop, one 4” ABS overflow standpipe and two self-locking polyethylene dome strainers with a combined free area of 250 square inches.

No Rating

Product Version: Unknown

728 Downloads

These Revit Schedules are a room schedule filtered for the room named Attic and a soffit schedule that includes a soffit pretending to be the ridge vent. The soffits model across the whole roof including the eaves to get the required area. The ridge vent is a narrow soffit at the ridge the length of the ridge minus the width of the boundary. I have included the stand alone schedules with no model at www.revitcity.com . The math formulas are in the schedules and can be modified per required code. The formula for the ridge vent is the perimeter of the ridge / 2. The ridge boundary is as narrow as possible so I can get a length value. Conditional values are set to black out the values if the manufacture is not who I need it to be. I think it’s pretty cool. If you have any questions feel free to email me at JustinDesigns3D@gmail.com. Enjoy :-)

No Rating

Product Version: Revit Architecture 2015

1313 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

715 Downloads

Under counter Basin with Fixing Accessories Set Size: 555x425x195 mm, Shape : Oval

 Vitreous china sanitary ware products are fragile in nature and need to be handled with care (to avoid personal injury) at all times during its storage, handling, installation and use thereafter.  The product is heavy and it is recommended that two persons hold it while it is being fixed.  Carefully inspect the new product for damage before installation.  Risk of product damage. Over tightening may cause breakage or chipping of vitreous china.  Risk of external leakage. Do not lift or rock the bowl after placement.  Always test your cleaning solution on an inconspicuous area on the product before applying it to the entire surface.  Do not allow cleaners to sit or soak on the product.  Use a soft, dampened sponge or cloth to clean. Never use abrasive material like a bristle brush or scouring pad.  Wipe surfaces clean and rinse completely with water immediately after applying cleaners.  Clean Chrome, stainless steel surfaces once a week. Do not use cleaners containing chloride on chrome, stainless steel. If used, rinse the surface immediately to prevent corrosion.  Wherever chrome plating is used on the products, use only warm water to clean and then dry with a soft cloth

No Rating

Product Version: Revit Architecture 2018

1428 Downloads

Under counter Basin with Fixing Accessories Set Size: 555x425x195 mm, Shape : Oval

 Vitreous china sanitary ware products are fragile in nature and need to be handled with care (to avoid personal injury) at all times during its storage, handling, installation and use thereafter.  The product is heavy and it is recommended that two persons hold it while it is being fixed.  Carefully inspect the new product for damage before installation.  Risk of product damage. Over tightening may cause breakage or chipping of vitreous china.  Risk of external leakage. Do not lift or rock the bowl after placement.  Always test your cleaning solution on an inconspicuous area on the product before applying it to the entire surface.  Do not allow cleaners to sit or soak on the product.  Use a soft, dampened sponge or cloth to clean. Never use abrasive material like a bristle brush or scouring pad.  Wipe surfaces clean and rinse completely with water immediately after applying cleaners.  Clean Chrome, stainless steel surfaces once a week. Do not use cleaners containing chloride on chrome, stainless steel. If used, rinse the surface immediately to prevent corrosion.  Wherever chrome plating is used on the products, use only warm water to clean and then dry with a soft cloth

No Rating

Product Version: Revit Architecture 2018

692 Downloads

AVENUE STREET LIGHTING 36led

Art. S.3090N36 MODULES LED 4000K  220-240Vac 12614lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 9976lmRated input power: 107WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 66MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLE CONNECTIONPole mounted in painted aluminium with Ø 102 mm connection. ON REQUEST ADAPTOR for cylindrical poles Ø 76 mm.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H05RN-F cable. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Anthracite grey (cod.24). Weight: 18.96 Kg Glow Wire test: -- Exposed windage area : 0,06 m² ( 1000mm ), 0,05 m² ( 800mm ), 0,04 m² ( 645mm )LED circuit included.AVENUE PATENT PENDINGThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

816 Downloads