Double or single-sided wall-mount perpendicular exit sign with adjustable directional arrows both in model and symbol. Model hides in coarse view settings. Symbol shows in plan or RCP views. Symbol hides in fine view setting, or as a parameter. No actual light source. Best placed in elev or 3D views.

No Rating

Product Version: Revit Architecture 2011

8983 Downloads

Double or single-sided wall-mount parallel exit sign with adjustable directional arrows both in model and symbol. Model hides in coarse view settings. Symbol shows in plan or RCP views. Symbol hides in fine view setting, or as a parameter. No actual light source. Best placed in elev or 3D views.

No Rating

Product Version: Revit Architecture 2011

14766 Downloads

This is a wall based oven tower with one extra large oven on the bottom, 2 smaller ones in the middle and shelves on the top, there are 2cversions closed and with the bottom open, the drawer on the bottom is part way open in both. the third file is the open tower with an added light built in as the Heating Coil thing you may have to play with the w/lm in the properties for rendering to look right it is a modern design (the top handles were done like they are intentionally)

Product Version: Unknown

23507 Downloads

MIFAB® Series F1510 lacquered cast iron floor drain with deep sump body, wide anchor flange, weepholes, and adjustable collar with square heavy duty ductile iron hinged tractor grate with four piece surface membrane clamp, sediment bucket and free area of 51 in² (32,903²).

No Rating

Product Version: Unknown

215 Downloads

SEE WHOLE TUTORIAL OF WINDOW

https://youtu.be/LuIXSrg_1BM

SEE WHOLE TUTORIAL OF HANGING LIGHT

https://youtu.be/OY1HhuuR4Hc

No Rating

Product Version: Revit Architecture 2016

136 Downloads

 Wall Light from Bruckner Hudson Valley Lighting 

No Rating

Product Version: Revit Architecture 2020

2704 Downloads

Series CA-461 wall mounted concealed arm lavatory carrier with adjustable epoxy coated cast iron wall plate, steel back-up plate, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, and plated hardware.

No Rating

Product Version: Revit MEP 2014

70 Downloads

Series WCA-411-D/WCA-411-D-WC back-to-back floor mounted concealed arm lavatory carrier with heavy gauge steel offset uprights with integral welded feet, adjustable epoxy coated cast iron arms with leveling screws and basin locking device, upper tie rod, and plated hardware.

No Rating

Product Version: Revit MEP 2014

23 Downloads

Classical candle wall sconce light family RA 2010

 Check out my projects made in Revit

Product Version: Revit Architecture 2010

5908 Downloads

This is the Deco Glam Chandelier from Shades Of Light

It is nearly identical to the manufacturer's version. It works, and can be found at ShadesOfLight.com.

Specs are as follows...

Deco Glam 4-Light Chandelier

Height: 21”, Diameter: 21”

Requires (4) 60W Incandescents

Product Version: Revit Architecture 2010

27400 Downloads

Recreation of the 200559 - 8in Diamond Mini Pendant from Meyda lighting.  Overall length (ceiling to bottom of pendant body) is parametric to adjust hanging height.  Set materials for the mica shade and metal frame.

Made this for my wife who is an interior design student.  Hopefully it helps some other people out there.

Product Version: Revit Architecture 2017

1342 Downloads

Series TCA-440 epoxy coated wall mounted concealed arm track lavatory carrier come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware.

No Rating

Product Version: Revit MEP 2014

56 Downloads

Discera Solar offers a sleek architectural form in a solar powered configuration featuring a 39 watt metal halide light source with well defined IDA certified "Dark Sky Friendly" Full Cutoff optics. Engineered to achieve many years of low maintenence, self-contained performance. Sealed gel batteries and "smart controller" held aloft in a PVC easy access compartment.

Product Version: Revit Architecture 2010

17556 Downloads

Series TCA-450 epoxy coated wall mounted concealed arm track lavatory carrier for 27x20 lavatories come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware.

No Rating

Product Version: Revit MEP 2014

52 Downloads

Gun metal vent hood with built in lighting. Both hood and ductwork height is adjustable. Materials adjustable as well, just make sure you assign the vent lights to the "Light Filter" material before rendering.

All parameters should be instance parameters.

WARNING: Not a ceiling based model, so you will need to adjust duct height versus hood height.

Product Version: Revit Architecture 2015

27302 Downloads

My best recreation of the Sargent Chandel-Air from Meyda.  54" round, diffuser body, metal trim, fan blades, fan body materials can be set.  Only shaft length (to adjust hanging height) is parametric.

Made this for my wife who is an interior design student.  Hopefully is helps some others out there.

No Rating

Product Version: Revit Architecture 2017

476 Downloads

This is a model of a backyard barbeque, highly parametric, you can open and close the hood, and change many of the finishes.  I will also upload the steak model I made to show the grill in action.  I will be also loading the rangetop and articulated light for the barbeque as well.  

The barbeque has a void attachech so you can drop it on an existing counter and it will cut out the space around it.  Its one of my first attempts at building a parametric family.

Product Version: Revit Structure 2020

19836 Downloads

RFA for AED (Auto External Defibrillator) face-hosted all composed from native Revit primitives.  Intended to be applied to wall face-  There is no internal modeling, just objects viewed on the wall face.

Imperial units, Generic Models Category

Heart equipment life safety emergency medical exercise old sparky

Many thanks to the generous RevitCity staff and uploaders!

No Rating

Product Version: Revit Architecture 2020

574 Downloads

this is a cake display unit filled with a large variety of cakes including doughnuts, cookies, jam filled sticks with flavoured toping, gingerbread men, custard tarts, chocolate eclaires/porfito rolls, sponge cakes and slices, and other large cakes including a tiramissu.

all cakes on 5 degree angle and unit includes working light

Product Version: Unknown

35871 Downloads

this is a cake display unit filled with a large variety of cakes including doughnuts, cookies, jam filled sticks with flavoured toping, gingerbread men, custard tarts, chocolate eclaires/porfito rolls, sponge cakes and slices, and other large cakes including a tiramissu.

all cakes on 5 degree angle and unit includes working light

Product Version: Unknown

11982 Downloads

atkinson desk (not specifically measured to the real model)      light and chair are from bimobject.com                                                                                                                             enjoy!                 

No Rating

Product Version: Revit Structure 2017

731 Downloads

Series TCA-411 epoxy coated floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

90 Downloads

Ritorno is an elegantly designed and performance engineered indirect post top or wall mounted luminaire. Well suited for pedestrian scale site lighting applications, this fixture offers exceptional uniformity and glare control characteristics. The Ritorno utilizes standard medium base H.I.D. lamps up to 150 watts, 70 or 150 watt T6 Metal Halide, or QL Induction lamps up to 165 watts. Features include high efficiency output, sealed optics, marine grade stainless steel fasteners and a die cast aluminum lamp/ballast chamber with twist lock components for ease of servicing. Please take a look at RITORNO on the TELUS Corporation Project Page to the right.

Product Version: Revit Architecture 2010

6462 Downloads

A quick sketch of a tensile fabric shade made from Revit system roof.  Edit the roof footprint but keep the small pitched corners in place whatever shape you draw.

You may manually edit the column or rafters for any custom layout.

Edit the "Fabric" material for desired color or transparency -although the transparency adjustment often produces unexpected appearances.

Paste or link it into Revit file; there is no hosting in the components

No Rating

Product Version: Revit Architecture 2020

1416 Downloads

Cieling mounted Hood by Maxfire.  Designed and Manufactured in Italy and distributed in North America by www.rest-agio.com.  Download additional rfa. files at www.rest-agio.com as they become available.

Note: Files are in Revit 2012

Product Version: Unknown

2138 Downloads

Ritorno is an elegantly designed and performance engineered indirect post top or wall mounted luminaire. Well suited for pedestrian scale site lighting applications, this fixture offers exceptional uniformity and glare control characteristics. The Ritorno utilizes standard medium base H.I.D. lamps up to 150 watts, 70 or 150 watt T6 Metal Halide, or QL Induction lamps up to 165 watts. Features include high efficiency output, sealed optics, marine grade stainless steel fasteners and a die cast aluminum lamp/ballast chamber with twist lock components for ease of servicing. Please take a look at RITORNO on the TELUS Corporation Project Page to the right.

No Rating

Product Version: Revit Architecture 2010

4656 Downloads

FP Focus Point SpeakersPerfect for applications where you want sound in a precise spot. Use them in retail displays, restaurant booths, museum displays, and convention center kiosks. These unique speakers feature easy installation and clever accessories such as pinpointed light or even targeted scents.

Product Version: Unknown

2224 Downloads

Series TCA-411-D-WC epoxy coated back-to-back floor mounted concealed arm track lavatory carrier for 27 x 20 lavatories, with heavy gauge H2267steel offset uprights with welded feet, steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

36 Downloads

Cieling mounted Hood by Maxfire.  Designed and Manufactured in Italy and distributed in North America by www.rest-agio.com.  Download additional rfa. files at www.rest-agio.com as they become available.

Note: Files are in Revit 2012

No Rating

Product Version: Unknown

4429 Downloads

Series TCA-411-D epoxy coated back-to-back floor mounted concealed arm track lavatory carrier with heavy gauge steel offset uprights with welded feet, double steel cross plate with integral mounting brackets, sliding adjustable arm brackets, and adjustable cast iron concealed arms with mounting clips, leveling screws, and basin locking device.

No Rating

Product Version: Revit MEP 2014

32 Downloads