15 inch flat screen monitor w/keyboard mounted on swinging arm. For healthcare/medical purposes.

No Rating

Product Version: Unknown

6806 Downloads

Here is a two door cabinet wall mounted with lower drawers(Thomasville line) modeled by Team RPM

No Rating

Product Version: Unknown

9725 Downloads

Medicine Cabinet, flush mounted, frameless mirror. Control visability of swing in plan and elevation (on-off)

Product Version: Revit Architecture 2009

5605 Downloads

This is an 8' wide by 6' tall projection screen. It has a motor box at the top and can be mounted on a wall. Great for your home theater room

Product Version: Revit Architecture 2008

44769 Downloads

simple bench modeled for a plaza renovation. Files include freestanding double-sided, wall mounted, and corner bench. 

Product Version: Revit Architecture 2014

21563 Downloads

MIFAB® Series MC-26 water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down support.

No Rating

Product Version: Unknown

37 Downloads

8" Hexagon .pat file can be used in revit and other supported software.

How to use in revit

1.Copy the text. open note pad. Paste it and save with .pat(dot pat) extension

2. Open material tab then surface pattern then model pattern-- New--load the pat.

Product Version: Revit Architecture 2017

5553 Downloads

Typically ceiling mounted. Comes with Family Types for all wattage options. Electrical connector provided. Change to 120v,208v,240v or 600v manually in type properties.

Revit 2012

No Rating

Product Version: Unknown

1588 Downloads

Fully parametric RdBX section created in Revit Architecture 2012. The RdBX profile is a partition wall stud for high acoustic performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Detail Component.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

No Rating

Product Version: Revit Architecture 2012

1373 Downloads

Floor mounted aluminum storefront windows.

Has emergency ADA escape hatch casement.

No Rating

Product Version: Revit Architecture 2010

1586 Downloads

Wall Mounted Code Blue Switch for hospital or healthcare communications

No Rating

Product Version: Revit Architecture 2009

3277 Downloads

Just a basic, simple wall-mounted door stop, done with Revit 2017.

No Rating

Product Version: Revit Architecture 2016

850 Downloads

Parameters for length, width, heigth from floor, materiels and light source.

Product Version: Revit Architecture 2010

21691 Downloads

A wall mounted extract fan for wetrooms, ultility and kitchens.

Based on a Vent Axia Lo-Carbon Centra dMEV Unit

No Rating

Product Version: Unknown

2580 Downloads

Under counter Basin with Fixing Accessories Set Size: 555x425x195 mm, Shape : Oval

 Vitreous china sanitary ware products are fragile in nature and need to be handled with care (to avoid personal injury) at all times during its storage, handling, installation and use thereafter.  The product is heavy and it is recommended that two persons hold it while it is being fixed.  Carefully inspect the new product for damage before installation.  Risk of product damage. Over tightening may cause breakage or chipping of vitreous china.  Risk of external leakage. Do not lift or rock the bowl after placement.  Always test your cleaning solution on an inconspicuous area on the product before applying it to the entire surface.  Do not allow cleaners to sit or soak on the product.  Use a soft, dampened sponge or cloth to clean. Never use abrasive material like a bristle brush or scouring pad.  Wipe surfaces clean and rinse completely with water immediately after applying cleaners.  Clean Chrome, stainless steel surfaces once a week. Do not use cleaners containing chloride on chrome, stainless steel. If used, rinse the surface immediately to prevent corrosion.  Wherever chrome plating is used on the products, use only warm water to clean and then dry with a soft cloth

No Rating

Product Version: Revit Architecture 2018

1432 Downloads

Under counter Basin with Fixing Accessories Set Size: 555x425x195 mm, Shape : Oval

 Vitreous china sanitary ware products are fragile in nature and need to be handled with care (to avoid personal injury) at all times during its storage, handling, installation and use thereafter.  The product is heavy and it is recommended that two persons hold it while it is being fixed.  Carefully inspect the new product for damage before installation.  Risk of product damage. Over tightening may cause breakage or chipping of vitreous china.  Risk of external leakage. Do not lift or rock the bowl after placement.  Always test your cleaning solution on an inconspicuous area on the product before applying it to the entire surface.  Do not allow cleaners to sit or soak on the product.  Use a soft, dampened sponge or cloth to clean. Never use abrasive material like a bristle brush or scouring pad.  Wipe surfaces clean and rinse completely with water immediately after applying cleaners.  Clean Chrome, stainless steel surfaces once a week. Do not use cleaners containing chloride on chrome, stainless steel. If used, rinse the surface immediately to prevent corrosion.  Wherever chrome plating is used on the products, use only warm water to clean and then dry with a soft cloth

No Rating

Product Version: Revit Architecture 2018

693 Downloads

Fully parametric SKY (slotted U) section created in Revit Architecture 2012. The SKY profile is an exterior wall runner for high thermal performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Framing.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

Product Version: Revit Architecture 2012

2013 Downloads

needed this reception desk by  http://www.mobior.com/eng/empresa.php so i created, and wanted to share,there are materials parameter for each curvy surface and desktop an framework, in genral you can do a lot of things with playing around with different materials,all the other staff are from revitcomponents,they have an account in RevitCity so just type their username,tell me what do you think about it

Product Version: Revit Architecture 2011

51979 Downloads

Russian Imperial Insignia, Wall mounted Size 2m

No Rating

Product Version: Revit Structure 2020

81 Downloads

Red Spot Light, but colour is changable. Spotlight case material can be changed. Ceiling Based

Product Version: Revit Architecture 2009

16136 Downloads

Fully parametric RdBX section created in Revit Architecture 2012. The RdBX profile is a partition wall stud for high acoustic performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Column.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

Product Version: Revit Architecture 2012

3813 Downloads

Revised from wall-mounted soap shelf downloaded from Revit City.  I can't find the source again to give proper credit (sorry I looked). 

No Rating

Product Version: Revit Architecture 2009

1757 Downloads

Wall mounted tap with large levers. Hospital clinical hand basin use.  Object is un-hosted.  Spout is 150mm option.

No Rating

Product Version: Revit Architecture 2009

3436 Downloads

Wall mounted uplight. Materials are parametric. Be sure to set the lens material to glass and the reflector to Chrome or Mirror. Based on the Varial by Belfer Lighting.

Product Version: Unknown

8414 Downloads

Visit http://www.urbimrevitcomponents.co.uk/ for access to more free downloadable Revit Components.

Also follow us on Facebook http://goo.gl/xDWne to keep up to date with the latest Revit Component uploads.

urBIM Revit Components

Product Version: Revit Architecture 2012

11008 Downloads

Visit http://www.urbimrevitcomponents.co.uk/ for access to more free downloadable Revit Components.

Also follow us on Facebook http://goo.gl/xDWne to keep up to date with the latest Revit Component uploads.

urBIM Revit Components

Product Version: Revit Architecture 2012

7362 Downloads

Visit http://www.urbimrevitcomponents.co.uk/ for access to more free downloadable Revit Components.

Also follow us on Facebook http://goo.gl/xDWne to keep up to date with the latest Revit Component uploads.

urBIM Revit Components

Product Version: Revit Architecture 2012

12991 Downloads

parametric L-shaped shelf. Not Wall mounted. shelf subcategory has dashed linetype.

No Rating

Product Version: Unknown

7882 Downloads

Very modern + sleek chandelier. Cylindrical drop bulbs descending in a tapered pattern mounted to a ceiling base.

 Visit  my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

3659 Downloads

Floor mounted dock leveler plate with bumpers

Product Version: Revit Architecture 2008

7472 Downloads