This is a copy of a real wooden lamp I made a few years ago.  The shade was scroll-sawed with a frosted backing.  The base was turned on a lathe.  This would be a neat piece for a cabin, lodge, or rustic decore.   Please rate/comment.  Thanks for looking!

Product Version: Revit Architecture 2012

8649 Downloads

Parametric String Lights using adaptive components. Adjusting the U_VAL and V_VAL changes the placement of the inner spline point. Additional parameters include: light bulb count, ends offset, and fixture materials.

Placement seems to work best using vertical planes. If the fixture ends up facing the wrong direction - try setting the workplane to a vertical placement plane and rotating.

Note: Original Light Bulb family modified from Ryan Davis's upload. No earlier version available currently, possibly in the future. Sorry! :(

Product Version: Revit Architecture 2020

16372 Downloads

These files are based on 3Form Panels and 3Form Suspend Solutions Hardware. These files are meant to be used together and placed into the Project Environment. The Panel can be customized in width and height (Note that 3Form panels are typically 4'-0" wide by 8'-0" high maximum) and is placed by the centerline in height to coordinate with the suspension system parameters. The hardware suspension system has adjustments for overall height and the panel centerline height to move the clips up and down. The clips can be switched from center clips to end clips and the bottom attachment can be changed from floor mounted to wall mounted as well. NOTE: THIS DOWNLOAD ONLY DOWNLOADS THE PANEL. THE SUSPENSION SYSTEM IS A SEPARATE DOWNLOAD.

Product Version: Revit Architecture 2013

7793 Downloads

This is a tranaction window with a transaction drawer based upon the Diebold model 131-85 Retail Window with 121-30 transaction drawer (5'-0"x5'-0" window opening). There is also a microphone modeled on the interior transaction surface. This is similiar to what you would see in a pharmacy drive through. I did not make this parametric because I did this for a specific instance.

Product Version: Unknown

23349 Downloads

Last Lantern I'll probably make for a while.  Its a Vintage Monarch that gives a rustic decore in any room.  The Lamp is a Lightsource and Took about 2 hours to make.  The render was about 4 minutes.  Fun project in some down time.  Rate/comment if you like!  Thanks.

Product Version: Revit Architecture 2012

7970 Downloads

A quick build in some time between Lectures.  Its a Glass oil lamp / Lantern that is a lightsource.  Great for a Cabinet, shelf or table.  Glass has a small hint or purple to simulate age.  Please rate/comment.  Thanks!

Product Version: Revit Architecture 2012

6500 Downloads

This special fixture uses the advanced Selux patented Aura Technology which adds to its technical performance and aesthetic design. Aura Technology, developed and patented by Selux, utilizes a multi-layered, scratch resistant, acrylic material that has a satinized finish and an anti-static treatment. This remarkable material is edge-lit providing luminaire designs that achieve a smooth and even glow throughout the self-illuminated form. The Aura principle is to provide a balanced illuminance between the ceiling and fixture body.

The Aurea luminaire is pendant mounted using the latest in T5 fluorescent technology with a choice of either T5 or T5HO lamps. This direct/indirect pendant uses a polished Paravex Radial Louver which gives brightness control and exceptional cut-off. When continuous runs are desired, a decorative connector is available to provide smooth transitions between fixtures. The Aurea offers a sleek, contemporary design as well as superior visual comfort making it an ideal light source for a wide variety of architectural styles and applications.

Product Version: Revit Architecture 2010

12454 Downloads

This special fixture uses the advanced Selux patented Aura Technology which adds to its technical performance and aesthetic design. Aura Technology, developed and patented by Selux, utilizes a multi-layered, scratch resistant, acrylic material that has a satinized finish and an anti-static treatment. This remarkable material is edge-lit providing luminaire designs that achieve a smooth and even glow throughout the self-illuminated form. The Aura principle is to provide a balanced illuminance between the ceiling and fixture body.The Aurea luminaire is pendant mounted using the latest in T5 fluorescent technology with a choice of either T5 or T5HO lamps. This direct/indirect pendant uses a polished Paravex Radial Louver which gives brightness control and exceptional cut-off. When continuous runs are desired, a decorative connector is available to provide smooth transitions between fixtures. The Aurea offers a sleek, contemporary design as well as superior visual comfort making it an ideal light source for a wide variety of architectural styles and applications

Product Version: Revit Architecture 2010

15103 Downloads

The object is fabricated to support ducts especially when wall mounted bracket is not relevant

No Rating

Product Version: Unknown

199 Downloads

This is a roof hosted family modeled from Boardwalk Systems NZ Ltd modular walkway / platform system.  Used as a service access walkway or light plant platform in light commercial, industrial & large residential applications.  Adjust the offset from the roof in the element properties dialogue under roof thickness, once set the board will sit flush to the roof.  If you have any problems with this family please notify me.  Created in Revit Architecture 2010

No Rating

Product Version: Revit Architecture 2010

3928 Downloads

These files are based on 3Form Panels and 3Form Suspend Solutions Hardware. These files are meant to be used together and placed into the Project Environment. The Panel can be customized in width and height (Note that 3Form panels are typically 4'-0" wide by 8'-0" high maximum) and is placed by the centerline in height to coordinate with the suspension system parameters. The hardware suspension system has adjustments for overall height and the panel centerline height to move the clips up and down. The clips can be switched from center clips to end clips and the bottom attachment can be changed from floor mounted to wall mounted as well. NOTE: THIS DOWNLOAD ONLY DOWNLOADS THE SUSPENSION SYSTEM. THE PANEL IS LOCATED IN A SEPARATE DOWNLOAD.

No Rating

Product Version: Revit Architecture 2013

4029 Downloads

A stainless steel refridgerator with a television mounted in the door.

Product Version: Unknown

15157 Downloads

provides subtle light

great in any room

Product Version: Unknown

17840 Downloads

Light post with 6 lights. Parametric.

No Rating

Product Version: Revit Architecture 2017

2274 Downloads

Roof cricket that is easy to use and reflect actual construction size for 1/2:12 sloped insulation. made with complex trig formulas. easily gives you slopes in all directions. Roof hosted. INSTRUCTIONS: place on roof surface. Adjust Li & Hi (i.e. lenght and depth of cricket) in decimal FT and align to the walls. only works on right angles.

No Rating

Product Version: Unknown

1109 Downloads

Wall mounted shield with the Pendragon crest. The materials are parametric.

No Rating

Product Version: Revit Architecture 2020

315 Downloads

More FREE Revit components available at www.urbimrevitcomponents.co.uk

Join us on Facebook to stay up to date on new Revit Component uploads at http://goo.gl/cTeiJO

Happy Reviting!!

No Rating

Product Version: Revit Architecture 2012

4307 Downloads

Fully parametric C section created in Revit Architecture 2012. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Column.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

Product Version: Revit Architecture 2012

3953 Downloads

5 picture frame profiles in family.  Turn on/off 2 layers of matting as well as 45 degree cut.  Turn on/off image surface (depth can change depending on how many/if you have matting on). Frame dimensions are dynamic and parameters set to vary amount of matting around the picture. 

Please rate! :-)

Product Version: Unknown

46369 Downloads

Parabolic shape / t-5 bulb lighting / commercial setting

Height Adjustable / Ceiling Mounted

Product Version: Revit Architecture 2015

16624 Downloads

A wardrobe family with drawers and shelving built in. Collection of nested families and is wall mounted.

Product Version: Unknown

18208 Downloads

Single wall mounted sink

Product Version: Revit Building 9

9546 Downloads

Wall mounted sconce

No Rating

Product Version: Unknown

2312 Downloads

Simple armchair made from an extrusion and lines. Perfect for axonometrics when you don't want to delete a bunch of closely spaced lines in illustrator. The beam is offset to counter line clipping through the table top surface.

No Rating

Product Version: Revit Architecture 2016

1984 Downloads

Modelled a Hammered style vase collection for a bit of that finishing touch for your living room / lounge renders.

All modelled in one set, and 3 different materials for each one, all chanageable to your own liking.

Created as a face based model so will drop on surface face of tables/coffee tables etc.

Hope it comes in useful.

Cheers

Product Version: Revit MEP 2014

24223 Downloads

goose neck sign light

No Rating

Product Version: Revit Structure 2008

995 Downloads

This one is not sending any light upwards

Product Version: Unknown

6911 Downloads

2x2 Fluorescent Light Fixture

Product Version: Revit Architecture 2011

8218 Downloads

Fully parametric U section created in Revit Architecture 2012. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.

The family type is Structural Framing.

For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology.

No Rating

Product Version: Revit Architecture 2012

1849 Downloads

Zip Boiling & Chilled water unit - bencht mounted Tap font with Drip tray.

Product Version: Unknown

4786 Downloads