Wall hosted Plasma Television with parametric mounting depth. TV design based on the Panasonic model TC-P54VT25.

Product Version: Revit Architecture 2010

160265 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

719 Downloads

Airport baggage carousel with sloping surface - Parametric 

Product Version: Revit Architecture 2011

2066 Downloads

MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

27 Downloads

http://www.vtourinteractive.com/blog

No Rating

Product Version: Revit Architecture 2010

1703 Downloads

A simple louver system that can be customized to fit almost any scenario on a flat surface.

Number of Louvers based on Baseplate Length

Product Version: Revit Architecture 2015

10262 Downloads

Transfer Switches are designed for a variety of standby power applications for critical loads and offer an enhanced set of features that will meet your application requirements. They minimize initial equipment costs, reduce installation time, and increase system reliability.

Product Version: Unknown

1442 Downloads

Model off of the Mark Architectural Lighting Magellan Series. Very Detailed

Product Version: Revit Architecture 2010

19311 Downloads

Pine table seats up to eight.  Felt playing surface

No Rating

Product Version: Revit Architecture 2015

8850 Downloads

Based on the light fixture series by Camman Industries.  Fixture height and radius are adjustable.   There was an issue with the light source not rendering - that has been corrected.

No Rating

Product Version: Revit Architecture 2011

8404 Downloads

Hose reel used in ORs exam rooms and procedure rooms.  Based on Allied Health Hose Reel

No Rating

Product Version: Unknown

2166 Downloads

This is LSI model EPM. It is their low-profile eyeball fixture in the standard white color.

No Rating

Product Version: Revit Architecture 2013

3228 Downloads

Fully parametric globe pendant light (drop from ceiling, globe diamater, light drop, light size, materials)

My website / portfolio: www.micksdesign.wix.com/adam

Product Version: Revit Architecture 2014

21618 Downloads

MIFAB® Series MC-56 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs and fixture leveling hardware

No Rating

Product Version: Unknown

55 Downloads

Recption desk with led lighting in high counter to iluminate transpart solid surface countertop

Product Version: Revit Architecture 2018

31380 Downloads

Full Parametric! You can choose between wood or glass paneel and everything is flexible!

Product Version: Revit Architecture 2014

3664 Downloads

MIFAB® Series MC-27 water closet carrier with lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8”ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down supports.

No Rating

Product Version: Unknown

42 Downloads

Parametric. You can change the width and depth of the shelf, and its height off the ground. You can also change how far apart the two wall supports are. 

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the support, not the shelf. Make sure the two elevation constraints are the same.

No Rating

Product Version: Unknown

11826 Downloads

I'm a student from the Art Institute of Portland in my senior year majoring interior design.  I'll be graduating in September 2013.  This is my second attempt at creating a lighting fixture, this is a nested family.  Feel free to provide any feedbacks.

Delightfull Unique Lamps

Conltrane Suspension - Ceiling Based Interior Lighting - Pendant Light - Height is Parametric

http://www.delightfull.eu/suspension/coltrane_suspension.html

Product Version: Revit Architecture 2013

12587 Downloads

Based on World Imports Luray Model

Material Parameters

Please Rate...

No Rating

Product Version: Revit Architecture 2013

3167 Downloads

MIFAB® Series MC-62 floor mounted service sink carrier with two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet, and lacquered cast iron fitting with no hub waste and vent connection (specify size of each). Complete with lacquered cast iron faceplate assembly, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

64 Downloads

CATCH SQUARE 4LED

Art. S.7406W 4 MODULES LED 3000K  220-240Vac 620lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 415lmRated input power: 7.8WLuminaire efficacy: 53lm/WElectronic ballast  DALI 2 / PUSH CELUMINAIRE TYPEFalse ceiling-recessed down-light fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Aluminium front trim or Marine grade stainless steel AISI 316L front trim. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08LIGHTING PERFORMANCEThe led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Toughened  transparent  glass 5mm thick. Lamp  adjustable ±20° position. LOR -- INSTALLATION AND MANTEINANCEThe luminaires are fixed to the falseceiling by a heavy-duty bracket system, adjustable. WIRINGLuminaire hard wired with 0.4m H05RNF cable, supplied with IP67 connector . Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 1.84 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2019

199 Downloads

Track lighting family offers basic rcp sybol and provides correct number of fixtures accordign to track length and light spacing parameters.  Good base to start looking at shared families to pull your own light fixtures into.

No Rating

Product Version: Unknown

10416 Downloads

Parametric Exit Sign.

Family is face based so it can be used on a linked ceiling.

Available parameters:

  Color of letters (Red or Green)

  1 Sided or Two Sided

  Arrows to left or right

Product Version: Revit MEP 2010

4191 Downloads

شده معدنيه 

شباك معدني light weight

scaffolding -light weight close frame 1*2 m

Product Version: Revit Structure 2019

285 Downloads

The Artec S6 melds high design with computer designed optics for a powerful indirect asymmetric distribution with peak candela below 130 degrees. This sophisticated extruded aluminum form provides the designer a signature that can be applied in individual or continuous rows, wall mounted or pendant supported. With the double fixture stem mounting option, two Artec S6 fixtures can be mounted together back to back giving the possibility for a powerful symmetrical design configuration.

No Rating

Product Version: Revit Architecture 2010

3759 Downloads

just a simple array of lights I use for accent lighting. let me know what you think.

Product Version: Revit Architecture 2012

14100 Downloads

Adjusted from one I downloaded from this site - hopefully improved somewhat.

No Rating

Product Version: Revit MEP 2011

8690 Downloads

Vertical Steel Sunshade fully parametric

No Rating

Product Version: Unknown

9258 Downloads

900x2400mm Door. Suitable for Tropical Climate designs

Product Version: Unknown

197 Downloads