A landscaping/lawn sprinkler head, loosely modelled on Rain Bird's 1800 series.

No Rating

Product Version: Revit Architecture 2018

1075 Downloads

pendent sprinkler for areas with out cieling

No Rating

Product Version: Revit MEP 2008

1497 Downloads

The Watts Model LF07S Residential Fire Sprinkler Dual Check Backflow Preventer is designed for non-health hazard [i.e., pollutant] application on potable fire sprinkler service connections to protect against possible backsiphonage conditions that could inadvertently drain the fire sprinkler system.

No Rating

Product Version: Revit MEP 2014

213 Downloads

Modelled fire sprinkler head for MEP services.

Fixed in size but changable materials.

Hope it comes in useful

Product Version: Revit MEP 2014

15826 Downloads

a general fire sprinkler works with MEP

Product Version: Unknown

14143 Downloads

Sprinkler Head

No Rating

Product Version: Revit Building 6

4414 Downloads

sprinkler mount mounted as recess in ceiling

Product Version: Unknown

1210 Downloads

general fire sprinkler with a cage. works with MEP

No Rating

Product Version: Unknown

4207 Downloads

Pendent Sprinkler

Product Version: Revit MEP 2013

5948 Downloads

Upright Sprinkler

Product Version: Revit MEP 2013

4523 Downloads

This is a basics fire sprinkler that works with revit MEP and can be hooked to water lines. It is ceiling based and can be used with architecture and structure.

No Rating

Product Version: Revit MEP 2009

5727 Downloads

general fire sprinkler. works with MEP. i have uploaded this be fore however i did not know it did not work with MEP. this one does thanks to the help of "Eddieboarder91"

No Rating

Product Version: Revit Architecture 2009

4284 Downloads

2D fire sprinkler riser symbol that looks a bit more "correct" than the other one I found here.

No Rating

Product Version: Revit Architecture 2010

2294 Downloads

A residential Rain Bird sprinkler valve, above grade.  Several are commonly found around a house.

No Rating

Product Version: Revit Architecture 2015

948 Downloads

general recessed fire sprinkler. works with MEP. i have uploaded this be fore however i did not know it did not work with MEP. this one does thanks to the help of "Eddieboarder91"

No Rating

Product Version: Revit Architecture 2009

6554 Downloads

general fire sprinkler with cage. works with MEP. i have uploaded this be fore however i did not know it did not work with MEP. this one does thanks to the help of "Eddieboarder91"

No Rating

Product Version: Revit Architecture 2009

2064 Downloads

Emergency Sprinklers

No Rating

Product Version: Unknown

3685 Downloads

rate, share and enjoy..

Product Version: Revit Structure 2009

4226 Downloads

Based on Guardian #6114

Version: Revit Architecture 2019

Product Version: Unknown

5889 Downloads

This has a solid white fill, to read better on small scale RCPs

No Rating

Product Version: Revit Building 9

1635 Downloads

Series 757DCDA, 757NDCDA Double Check Detector Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Compact housings consist of two independently operating tri-link check valves, two shutoff valves, and four test cocks. They feature a stainless steel housing and sleeve and are 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. This Series is used primarily on fire sprinkler lines when it is necessary to monitor unauthorized use of water. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

566 Downloads

Series 957RPDA, 957NRPDDA, 957ZRPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 957RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a compact, stainless steel body with stainless steel internal parts, two check valves, a pressure-differential relief valve, shutoff valves, torsion spring checks and relief valve, and bronze, nickel-plated test cocks. Series 957RPDA, 957NRPDDA, 957ZRPDA is 70% lighter than traditional designs and is ideal for health hazard cross-connection, such as on fire sprinkler systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

355 Downloads

Download: http://bimobject.com/en/geberit/product/20601 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Geberit Mapress Carbon Steel is designed for installations in which economy is of the highest priority. The system is mainly used in water heating systems, cooling water systems, sprinkler systems, extinguishing water pipes or compressed air networks.

No Rating

Product Version: Unknown

785 Downloads

Download: http://bimobject.com/en/geberit/product/20601 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Geberit Mapress Carbon Steel is designed for installations in which economy is of the highest priority. The system is mainly used in water heating systems, cooling water systems, sprinkler systems, extinguishing water pipes or compressed air networks.

No Rating

Product Version: Unknown

455 Downloads