The vertical bowl outlet consists of a bowl that cumulates the water before it flows down into the pipe system of the building via vertical pipes of standard diametres from ø50 to ø110 mm.Bowl outlets are made from stainless steel and can be delivered with integrated bitumen or foil membrane.

No Rating

Product Version: Revit Architecture 2019

130 Downloads

Series ISCA-550 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

61 Downloads

CB-624 or CB-2424 Catch Basin for Series Dead Level Pre-Sloped Trench Drain System, 6 in. (152mm) or 24 in. (610mm) (specify) wide x 24 in.(610mm) long x 24 in.(610mm) deep, with UV stabilized talc-filled polypropylene body with 4 in. (102mm) and 6 in. (152mm) no hub outlet connections, and polypropylene (6 in. wide only) or ductile iron frame. Catch Basin shall be frame-anchored, with (specify) grating and lockdowns to suit DIN Class (specify) load rating. Installation to be performed in accordance with manufacturer's recommendations.

No Rating

Product Version: Revit MEP 2014

1168 Downloads

Series ISCA-560 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting plate and brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

59 Downloads

Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

805 Downloads

Complete your industril kicthen rendering with this cold display. All electric and water connections are nodeled according to factory specifications.

Go to www.prodlib.com for more free Revit families such as this one!

No Rating

Product Version: Revit Structure 2015

2191 Downloads

Series LFB6780-M1 2-Piece, Full Port, Lead Free* Copper Silicon Alloy Diverter Ball Valves are designed to divert liquids and gases in commercial and industrial applications. The full port orifice ensures minimal pressure drop, while PTFE seats and stainless steel ball provide lasting service. Has threaded NPT end connections. Pressure Rating is 400psi (28 bars) WOG (non-shock) @ 100°F and 125psi (8.6 bars) WSP.

No Rating

Product Version: Revit MEP 2014

153 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

Product Version: Revit Architecture 2010

3629 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

No Rating

Product Version: Revit Architecture 2010

7229 Downloads

Series LFIT6300 & LFIS6301 2-Piece, Full Port, Ball and Waste Lead Free* Copper Silicon Alloy Ball Valves feature a side drain port to drain or vent a downstream line when the valve is in the off position. A full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve. The Lead Free* construction complies with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

771 Downloads

Series LFFBV-3C and LFFBVS-3C Lead Free* 2-Piece, Full Port, Brass Ball Valves are designed for use in commercial and industrial applications for a full range of liquids and gases. They’re constructed for reliable performance with a fluorocarbon elastomer stem O-ring that prevents stem leaks, a bottom-loaded blowout-proof stem, and an adjustable stem packing gland. LFFBV-3C models have threaded end connections. LFFBV-3S have solder end connections. Available in several sizes.

No Rating

Product Version: Revit MEP 2014

135 Downloads

Water Tank INECA

700 lts.

Product Version: Revit Architecture 2012

3016 Downloads

The Pronto!™ FD-190-PR-60 PVC adjustable floor drain offers 1 3/4” pre- and 7/8” post-pour adjustability with an integrated bubble level, two leveling shims and a reversible clamping collar with weepholes to ensure professional results. This floor drain also features an anchor flange, round nickel bronze strainer, and a solvent weld outlet. Options include vandal-proofing, trap primer tapping, a backwater valve, side outlet and a choice of funnels.

No Rating

Product Version: Revit Structure 2014

721 Downloads

Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered.

No Rating

Product Version: Revit MEP 2014

833 Downloads

Series LFB6800 & LFB6801 3-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves feature an in-line maintenance design that offers serviceability of all operating parts without disturbing the rigid pipeline system. Their full port orifice ensures maximum flow capacity. Durafill seats, and stainless steel ball and stem provide maximum safety and highest operating pressure and temperature limits. Lead Free* construction complies with Lead Free* installation requirements.

Product Version: Revit MEP 2014

238 Downloads

Series LFFBV-3C and LFFBVS-3C Lead Free* 2-Piece, Full Port, Brass Ball Valves are designed for use in commercial and industrial applications for a full range of liquids and gases. They’re constructed for reliable performance with a fluorocarbon elastomer stem O-ring that prevents stem leaks, a bottom-loaded blowout-proof stem, and an adjustable stem packing gland. LFFBV-3C models have threaded end connections. LFFBV-3S have solder end connections. Available in several sizes.

No Rating

Product Version: Revit MEP 2014

110 Downloads

Series B6400 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It comes standard with actuator mounting pads and the port orifice ensures minimal pressure drop. Durafill seats, blowout proof pressure retaining stem, and chrome plated brass ball provide lasting service. Pressure Rating for 1/4 ‒ 2 in. (8 ‒ 50mm) is 600psi WOG (non-shock) and 150psi WSP. Rating for 2 1/2 in. ‒ 4 in. (65 ‒ 100mm) is 400psi WOG (non-shock) and 125psi WSP.

No Rating

Product Version: Revit MEP 2014

753 Downloads

MIFAB® BIG-O Series HDPE rotational molded oil interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), internal air relief by-pass, adjustable oil draw-off assembly (1 1/2″) on each side, double vent connections (3″) on each side, sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20

No Rating

Product Version: Revit Architecture 2020

238 Downloads

Series LFFBV 2-Piece, Full Port, Lead Free* Bronze Ball Valves comply with MSS-SP-110 and feature a blowout proof stem and virgin PTFE seats. The full port design ensures maximum flow capacity and minimal pressure drop. Lead Free* construction complies with Lead Free* installation requirements. Has threaded NPT end connections. Pressure Rating is 600psi WOG/150psi WSP for 1/4 in. – 2 in. (8 – 50mm) and 400psi WOG/125psi WSP 2 1/2 in. – 3 in. (65 – 80mm).

No Rating

Product Version: Revit MEP 2014

754 Downloads

Series LFFBV-3C-SS & LFFBVS-3C-SS 2-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, virgin PTFE seats and thrust washer, and adjustable stem packing gland, stem packing nut, 316 stainless steel ball, Lead Free* copper silicon alloy adapter, and steel handle. Lead Free* construction to complies with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

123 Downloads

The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line

No Rating

Product Version: Unknown

191 Downloads

The “Y” type strainer shall be a bronze body strainer with a bronze cap and a stainless steel mess screen. The valve shall be designed so the screen can be cleaned without removal of the valve from the pipe line and shall be equipped with a enclosure plug in the brass clean out cap for the addition of a test gauge or secondary water line

No Rating

Product Version: Unknown

111 Downloads

Series LFFBV-PEX 2-Piece, Full Port, Lead Free* Brass Ball Valves with PEX Ends are designed for use in PEX piping systems. They feature brass PEX ASTM F-1807 end tailpieces for easy crimping into PEX piping systems, a Lead Free* brass body, chrome plated brass ball, virgin PTFE seats and stem packing, and Viton stem O-ring. Pressure Rating is 400psi WOG. Crimp connection rating is 160psi at 73°F (23°C).

No Rating

Product Version: Revit MEP 2014

388 Downloads

Series B6000, B6001 2-Piece, Standard Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a blowout proof pressure retaining stem. The B6000, B6001's standard port orifice ensures minimal pressure drop, while Durafill and Uniseal seats and chrome plated brass ball provide lasting service. Model B6000 has threaded NPT end connections and Model B6001 has solder end connections. Pressure Rating: For 1/4 to 3 in. - 600psi WOG (non-shock); 150psi WSP; For 4 in. - 400psi WOG (non-shock); 125psi WSP.

No Rating

Product Version: Revit MEP 2010

281 Downloads

MIFAB® Series R1100-F lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring with integral gravel stop, accuflow parabolic weir (specify -F1, -F2, -F3 for one, two or three slots), and standard selflocking polydome strainer with a free area of 43 square inches.

No Rating

Product Version: Unknown

188 Downloads

MIFAB® Series MI-NEUT solid construction seamless polyethylene body with inlet and outlet, optional vent connections, acid resistant epoxy coated bolted down neoprene gasketed lid, stainless steel hardware. The tank is filled with neutralization medium, lump limestone 1” to 3” diameter size, water is then added to the tank to help dilution.

Product Version: Unknown

159 Downloads

Series LFFBV-4 & LFFBVS-4 2-Piece, Full Port, Brass Ball Valves are suitable for a full range of liquids and gases in residential and commercial applications. These valves feature an adjustable packing for longer service life, a bottom loaded blow-out proof stem for safety, a fluorocarbon elastomer stem O-ring to prevent stem leaking at installation. Lead Free* construction complies with Lead Free* installation requirements. Rated to 600psi WOG and 150psi WSP for 1/4 in. – 2 in. (8 – 50mm) and 400psi WOG and 125psi WSP for the 1/2 in. – 3 in. (65 – 80mm).

No Rating

Product Version: Revit MEP 2014

122 Downloads

Series LFB6080 & LFB6081 Lead Free* 2-Piece, Full Port, Copper Silicon Alloy Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features virgin PTFE seats and seals and the full port orifice ensures minimal pressure drop. Virgin PTFE stem packing seal and thrust washer and chrome plated brass ball provide lasting service. Model LFB6080 has threaded NPT end connections and Model LFB6081 has solder end connections. Pressure Rating is 600psi WOG (non-shock) and 150psi WSP.

No Rating

Product Version: Revit MEP 2014

139 Downloads

MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use.

No Rating

Product Version: Unknown

323 Downloads

MIFAB® Series MC-28 lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste, 2” (51) no hub center vent connection and anti-crossover baffles for floor mounted back outlet water closets.

No Rating

Product Version: Unknown

33 Downloads