Series ISCA-122 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

39 Downloads

Series ISCA-122 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

34 Downloads

Series ISCA-122 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

29 Downloads

Refigerator - LG LMXS28626

Kind of parametric, but not really. Water dispenser is a nested family. Parameters that don't seem to break are overall width, and freezer heights. Comes with factory dimensions. 

Clearance required in rear: 2"

Clearance required in sides: 1"

No Rating

Product Version: Revit Structure 2020

1853 Downloads

Oval toilet with 2D clean representation, with lineweight representation in elevation. Does clean it self automatically, does not use potable water, no bolt required to install, strong and durable porcelain from my factory! Enjoy. When I have time I will make the handle to flush it!

No Rating

Product Version: Revit Architecture 2016

6535 Downloads

Oval toilet with 2D clean representation, with lineweight representation in elevation. Does clean it self automatically, does not use potable water, no bolt required to install, strong and durable porcelain from my factory! Enjoy. When I have time I will make the handle to flush it!

No Rating

Product Version: Revit Architecture 2016

3207 Downloads

Series LFU009 Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. The swivel feature in the series allows for it to be used in a variety of installations, including the prevention of health hazard cross-connections in piping systems or for containment at the service line entrance. This series features two in-line, independent check valves, captured springs, and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 1/2in. - 1in. (15 - 25mm) shutoffs have tee handles. It has cast copper silicon alloy body construction for durability. The LFU009 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

174 Downloads

Series ISCA-102-D Industry Standard back-to-back horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

69 Downloads

Series ISCA-122-D Industry Standard back-to-back vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

48 Downloads

MegaFlo 300L Hot Water Tank.

Nice small file. Made to MegaFlo specification.

Largest domestic MegaFlo tank that im aware.

Revit 2018LT

Enjoy!

Product Version: Unknown

2474 Downloads

Floor-based indoor swimming pool. Rectangular minus one corner, not parametric in any way, made from mixed colour cerami tiles and pre-filled with water. Still learning, but hopefully someone can use it.

Product Version: Revit Architecture 2009

38834 Downloads

Series ISCA-132-L/R/2 Industry Standard single vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

39 Downloads

Series ISCA-132-D Industry Standard back-to-back vertical adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, 4 in. (102mm) no hub side inlet(s), epoxy coated ductile iron compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

54 Downloads

Download: http://bimobject.com/en/geberit/product/20601 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Geberit Mapress Carbon Steel is designed for installations in which economy is of the highest priority. The system is mainly used in water heating systems, cooling water systems, sprinkler systems, extinguishing water pipes or compressed air networks.

No Rating

Product Version: Unknown

785 Downloads

Download: http://bimobject.com/en/geberit/product/20601 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

Geberit Mapress Carbon Steel is designed for installations in which economy is of the highest priority. The system is mainly used in water heating systems, cooling water systems, sprinkler systems, extinguishing water pipes or compressed air networks.

No Rating

Product Version: Unknown

455 Downloads

Parametric Water Tank mostly constructed on mumty roof. Internal size, wall thickness, floor & tank roof thickness, materials can be set manually. Tank can be raised above the roof. Manhole covers not provided . Lallan Ji, Varanasi

No Rating

Product Version: Revit Architecture 2015

1765 Downloads

Minimal Hand wash basin.

This hand basin is fixed in size but all materials are changable to your desire. I have even put on Water On / Off parameter within the family incase you wanted to add that little extra touch when creating your render.

Hope it comes in useful.

No Rating

Product Version: Revit MEP 2014

12330 Downloads

The BEECO Friendly Reduced Pressure Zone Backflow Preventer is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1013, CSA B64.4 and IAPMO listed. 

No Rating

Product Version: Unknown

108 Downloads

Standard 13 x 19 inch concrete residential water meter box with concrete cover.  Letter and cover can be turned off.

Size can be adjusted, but box only comes in certain sizes.  Cover and box material can be changed, but the original product is concrete.

No Rating

Product Version: Revit Architecture 2015

4369 Downloads

Line-based detail component with variable symbols/letters spaced evenly along a solid line. I made this family to make up for Revit's lack of symbolic linestyles. Very customizable/parametric.

Good for representing fences, guy wires, overhead power lines, water/gas lines, etc...

Product Version: Revit Architecture 2016

4144 Downloads

Quick-Connect stackable hose barb unions - polysulfone. 3511B-1008 - 1/2 in. CTS x 1/2 in. Barb

No Rating

Product Version: Revit MEP 2014

208 Downloads

http://www.millipore.com/catalogue/module/c9185

Used in conjunction with Smart Remote PoU.

Laboratory pure/ultrapure water system.

No Rating

Product Version: Revit Architecture 2013

347 Downloads

http://www.millipore.com/catalogue/module/c9185

Used in conjunction with Smart Remote PoU.

Laboratory pure/ultrapure water systems.

No Rating

Product Version: Revit Architecture 2013

245 Downloads

http://www.millipore.com/catalogue/module/c9209

Used in conjunction with Smart Remote PoU.

Laboratory ultrapure water system.

No Rating

Product Version: Revit Architecture 2013

189 Downloads

http://www.millipore.com/catalogue/module/c72876

Used in conjunction with Q-Pod.

Laboratory pure/ultrapure water systems.

No Rating

Product Version: Revit Architecture 2013

626 Downloads

Watts Drainage Products FD-540 epoxy coated parking area drain with fabricated steel body and extra heavy duty 24-1/2 in. x 24-1/2 in. (622 x 622mm) two-section ductile iron grate, and noe hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

1164 Downloads

http://www.millipore.com/catalogue/module/c10117

Used in conjunction with Q-Pod.

Laboratory ultrapure water system.

No Rating

Product Version: Revit Architecture 2013

551 Downloads

3,000 Litre Slimline (SL3000UR) Duraplas Tank Package with Pump and Accessories

https://www.watertankfactory.com.au/water-tanks/urban-sl3000-tank-package/

No Rating

Product Version: Revit MEP 2018

701 Downloads

A Face based family of water closet based on Nexo model of ROCA, inclusive of Parameter for Health faucet, SAP codes, Ablution tap. WIP to add MEP Connections invite comments to improve the same

Product Version: Revit Structure 2013

9055 Downloads

http://www.millipore.com/catalogue/module/c85358

Laboratory pure/ultrapure water systems.

No Rating

Product Version: Revit Architecture 2013

648 Downloads