Water fountain off-set from wall for indented areas

No Rating

Product Version: Unknown

3586 Downloads

Series LF800M4QT Lead-free* Anti-Siphon Pressure Vacuum Breakers prevent the reverse flow of liquids in a plumbing system due to backsiphonage where there is a potential health hazard. For use in continuous pressure applications where the water enters the equipment at or below its flood rim. Designed for ease of maintenance with a replaceable plastic seat and readily accessible test cocks for testing and winterization. The seat disc is silicone rubber for durability, and an O-ring bonnet seal resists fouling.

No Rating

Product Version: Revit MEP 2014

158 Downloads

Series LFWCV, LFWCVS Lead Free* Brass Swing Check Valves prevent reverse fluid flow in water and steam applications. The Series features metal-to-metal seal with either threaded NPT or solder end connections in sizes 1/2 to 1 in. (15 to 25mm). They provide low pressure drop and automatic closure when fluid flow is stopped. Maximum Pressure: 200psi (13.8 bar) WOG (non-shock), 125psi (8.6 bar) WSP

No Rating

Product Version: Revit MEP 2014

699 Downloads

Series LF53 Lead Free* Pressure Relief Valves are spring operated Lead Free* brass relief valves designed to be used only as protection from the buildup of excessive pressure in systems containing water, oil, or air. These valves are not ASME approved safety relief valves and should not be used in system applications with this requirement. They feature a Lead Free* brass construction with stainless steel springs. Series LF53 is factory preset to standard pressure settings of 75, 100 or 125 psi(5.2, 6.9 or 8.6 bar).

No Rating

Product Version: Revit MEP 2014

143 Downloads

Model is based off of the Symphony 12 Series Ice & water dispenser

Product Version: Revit Architecture 2008

18041 Downloads

Hidrômetro simples que criei para uso em um projeto da faculdade. Sem muitos detalhes, apenas conexões nas duas pontas para que possa posicioná-lo em qualquer tubo existente.

---

Simple water meter I created to use in a university project. Without major details, only having pipe connections on both ends so it can be placed in any existing pipe.

Product Version: Revit Architecture 2018

2978 Downloads

Series 757, 757N Double Check Valve Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Its compact housing consists of two independently operating tri-link check valves, two shutoff valves, and four test cocks. It features a stainless steel housing and sleeve and is 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

383 Downloads

Zip Boiling & Chilled water unit - bencht mounted Tap font with Drip tray.

Product Version: Unknown

4771 Downloads

The materials are all parametric as well as the center spray height and water depth.

*Revit Architecture 2017

Product Version: Unknown

20075 Downloads

Dispenser for Direct-Q Remote or Synergy Remote laboratory pure/ultrapure water systems.

No Rating

Product Version: Revit Architecture 2013

1032 Downloads

Used in conjunction with Dialysis machines when piped RO water is not available. Modeled from photos. A little large (1.8Mb.) but there are alot of detail items

Product Version: Unknown

3297 Downloads

MIFAB Series MI-HEL ____ helicopter port fuel interceptor constructed from high-strength 1/4” (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2” (51) fuel drain connection, 1” (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2” (51) interceptor drain plugs, channel support rails and body corner lifting lugs. Interceptor shall be coated with a two-part epoxy interior and exterior coating.

No Rating

Product Version: Unknown

138 Downloads

Brass Cleanout Plug

No Rating

Product Version: Revit Structure 2014

113 Downloads

Inspired by JAMES termotanque linea cilíndrica cobre

Model Wall Based / basado en muro

Parametric 40, 60 & 80 Litres

Detail level: LOW - MEP level: LOW - Annotations: YES

No Rating

Product Version: Revit Architecture 2017

1851 Downloads

Series LF215 Super Sensitive Low Pressure Regulators are designed to meet low pressure precision requirements. The high ratio of diaphragm to orifice provides excellent performance and stability at low reduced pressure. The Series LF215 is ideally suited for water requirements up to 2.5 gpm (9.5 lpm) due to its Lead Free* brass body and brass and stainless steel internal parts. The LF215 is also suitable for pressure supply to wall attachment fluidic devices. The LF215 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

99 Downloads

Two "beds" to lay down, and bench seating the rest of the way around. Complete with headrests and an LED ambient lighting fixture. Filled with water.

Product Version: Revit Architecture 2010

1742 Downloads

Series 774DCDA Double Check Detector Assemblies prevent the backflow of fire protection system substances from being pumped or siphoned into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body, thermoplastic and stainless steel check valves, and low head loss. Series 774DCDA can be installed in the horizontal or vertical flow-up positions. It is designed for installation on applications identified by local authorities as non-health hazard, such as on fire protection systems. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

597 Downloads

Wall Cleanout with Brass Plug, Stainless Steel Cover

No Rating

Product Version: Revit Structure 2014

109 Downloads

Series LFFBV-3C-QC 2-Piece, Full Port, Lead Free* cast copper silicon alloy Ball Valves with Quick-Connect Technology are used in residential and commercial potable water applications. They feature a bottom-loaded blowout proof stem, virgin PTFE seats and thrust washer, adjustable packing gland, stem packing nut, chrome-plated brass ball adapter and steel handles. Comes with integral Quick-Connect inlet and outlet connections for fast installation on copper, CPVC, PEX, and PB pipe.

No Rating

Product Version: Revit MEP 2014

628 Downloads

Original Design. Meant to be used in as water sprayer, possible in customized poolside showers or wherever. Created in Revit Architect (Student Version) 2011. Used catelog imagery as guide. (Please, no genetalia jokes. I'm perfectly aware of how it looks.)

Product Version: Unknown

1040 Downloads

Dispenser for Milli-Q Integral, Milli-Q Advantage, or Elix Advantage laboratory pure/ultrapure water systems.

Product Version: Revit Architecture 2013

1727 Downloads

This is just an update of my first upload, added a non parametric chilled water connections (supply and return) and a power supply inlet.

Product Version: Revit MEP 2012

1493 Downloads

Lavadora extractora TSL-200 Braun, hospedada en pared, de paso a travez para uso hospitalario, para barrera sanitaria, para cuartos libres de contaminacion,  conexiones listas para vapor, agua fria y agua caliente, 90-105 kilogramos de capacidad

(Washer extractor TSL-200 Braun, hosted wall pass-travez for hospital use, for sanitary barrier for rooms free of contamination, lists connections for steam, hot water and cold water, capacity 90-105 kg ) 

Product Version: Revit MEP 2013

3920 Downloads

In wall washer water/drain connection

Product Version: Revit MEP 2014

1605 Downloads

The BEECO Friendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed.

No Rating

Product Version: Unknown

283 Downloads

Series ISCA-101-L/R Industry Standard single horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4 in. (102mm) no hub waste and 2 in. (51mm) no hub vent connections, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Unknown

127 Downloads

Watts ISCA-101-L/R-T Industry Standard single horizontal tapered thread water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron threaded faceplate assembly, epoxy coated cast iron foot supports with incremental measurements embossed onto legs to easily adjust height of carrier to most commonly used fixture requirements. Adjustable for standard and wheelchair height, threaded ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load.

No Rating

Product Version: Revit MEP 2014

75 Downloads

The BEECOFriendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed. Certified lead free devices.

No Rating

Product Version: Unknown

417 Downloads

The BEECO Friendly Reduced Pressure Zone Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1013. Is Certified to cUPC and IAPMO listed.

No Rating

Product Version: Unknown

198 Downloads

Series LF601 & LF601S Lead Free* cast copper silicon alloy Maxi-Flo Check Valves are used to prevent the effects of water hammer in the piping system. They feature a Lead Free* copper silicon alloy body, Viton disc, and integral copper silicon alloy seat. They have a low pressure drop and can be installed in a horizontal or vertical position. Model LF601 is available in sizes 1/4 to 1/2 in. (8 to 15mm) with threaded connections. Model LF601S is available in sizes 1/2 to 1 in. (15 to 25mm) with solder connections. Maximum Pressure: 250psi (17.24 bar) WOG non-shock @ 100°F (38°C).

No Rating

Product Version: Revit MEP 2014

123 Downloads