Storefront Entry Single Door- Curtain Panel.  This is similar to the Autodesk version but with push-pull handle and additional parameters- Fully Parametric.

Product Version: Revit Architecture 2009

25586 Downloads

This curtain is completely parametric. You can control the length, width, and depth. In addition to that, you can also control the number of curtain "panels". Just select a number greater than 2 for the panels and you can make the curtain panel as wide as you need it.

Product Version: Revit Architecture 2016

25997 Downloads

Single Door - Fully Parametric - All elements are nested families and are completely parametric. Full Lite, Half Lite, and Flush Panel doors included. All Hardware included.

Product Version: Unknown

3656 Downloads

This family has been in the works for some time now. It has a steel door frame that embeds itself in the concrete, cuts the wall as needed and had the door panel.  The door frame also adjusts itself to wall thicknesses

Product Version: Revit Building 9.1

2579 Downloads

AGRV_GLAZ-CURT_PanelOperating-Emg_嵌版可開窗-緊急

Metric Operating Curtain Panel Windows (it a panel families) and emergency red arrow with DIM & Material parameters and dimension Guide

Use parameter setting to switch between Casement Awning Hopper

Can be used to create curtain walls quickly and easily.

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

470 Downloads

Sliding glass door based on Andersen 200 series narrow line gliding panel. Includes threshold

No Rating

Product Version: Revit Architecture 2009

1616 Downloads

Model of Pathfinder individual, omni-directional panel wall with storage for panels on both sides of opening. Panels are in the folded position. Changing the size of the opening will not change the number of panels. In this sense it's a generic model.

Product Version: Unknown

6157 Downloads

Metropolitan by Minka Castellina One Light Wall Sconce in Antique

I MADE A TRANSLUCENT WOOD PANEL FOR THE GLOBE, BUT IT WOULD BE EASY TO SWITCH OUT FOR WHATEVER YOU CREATE.  THE DINENSIONS ARE NOT PARAMETRIC, BUT THE FINISHES ARE SET UP IN THE PROPERTIES.

No Rating

Product Version: Revit Architecture 2014

5582 Downloads

single panel door with upper & lower Vents. Completely Parametric. Materials Available. Revit 2025

No Rating

Product Version: Unknown

118 Downloads

single panel door with upper & lower Vents. Completely Parametric. Materials Available. Revit 2025

No Rating

Product Version: Unknown

87 Downloads

Manufacturer: Lozier

Model: WED (Wall End Display)

WxDxH is fully parametric, but I've only created types for a 48" tall piece. It might be easier to make separate families for each shelf height. The pegboard and slatwall back panel are both parametrically arrayed. Materials parameters also loaded.

Product Version: Unknown

13060 Downloads

3 side by side fixed panel windows stacked 2 high (6 windows all up)

Product Version: Revit Architecture 2010

25232 Downloads

Nested door having 1 wooden door cum window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it. etc.  etc.  By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family.  Lallan Ji

No Rating

No Rating

Product Version: Revit Architecture 2018

552 Downloads

This swing works because its faced-based [applied] to the swing plane.  Panel types are also swappable and more can be added.   Revit 2017 though.  Real Extrusions with no symbolic lines.  Jamb frame is also resizable so it can be made narrow to simulate a cased door by just adding trim.

Product Version: Revit Architecture 2016

1991 Downloads

Masonite entry door, fully parametric. Includes decorative inlays in the glass that only show up in 3D views. Raised & recessed panel work set to display only in fine views. Comes in 5 sizes:

2'-6" x 6'-8"

2'-8" x 6'-8"

2'-6" x 8'-0"

3'-0" x 6'-8"

3'-0" x 8'-0"

File is in Revit 2012

Product Version: Unknown

8971 Downloads

Folding Glazed Panel door. Parametric Number of Panels Parametric Number of Awning highlights Parametric width, height, frame thickness, Materials by Catagory

Product Version: Revit Architecture 2008

16396 Downloads

Set in the site Catagory, this water tank is modular & parametric. Changing the Module will change the tank Panel size.

Pull the sides & top etc. and it will jump to the next module.

Minimum will be a 2 x 2 x 2 cube

Product Version: Revit Architecture 2015

6888 Downloads

Stacking or Bi-folding partition wall with central pass door, modified model from someone on this site (Thanks!).

The only control to worry about is the 'Bi Fold' parameter - automatically flips central pass door depending on panel numbers (2 onwards), or stacks the panels to one side

Product Version: Revit Architecture 2013

25401 Downloads

A triangular curtain wall panel with silicon joint geometry (no silicon but flush faced glazing).  Use with pattern based curtain wall systems.

Product Version: Revit Architecture 2012

7373 Downloads

Single Flute of B-Deck. (Simplified) Created as a structural beam. Ends are adjustable. Allows 3d manipulation. Array to create a panel of B-Deck.  (Join to remove joint line.) Intended more for exposed material as a design element. Don't use for large expanses or it will suck up your memory. 

Product Version: Unknown

10779 Downloads

Modern DVD Tower - Curved Vertical Panels stack up to form this center tri-core assembly. Blue DVD Panel, Black Vertical Supports and Aluminum Circular Base w/ Vertical Rod for Support.

Visit my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

3046 Downloads

This is a pretty simple (but too complicated to do within Revit) model fill pattern I made to use to show a walk-on IMP ceiling in a reflected ceiling plan. The panel size is 3'-6" by 10'-6"

No Rating

Product Version: Unknown

1390 Downloads

Revit v2026

Scalable Rock / Boulder family based on Big_Rock_Boulder_16746 by arharsh46, but now has instance scale factor that can be adjusted directly in the properties panel of the project file.  No need to open the family to change its size.

Type material for easily creating different groups of boulders with similar materials. 

No Rating

Product Version: Revit Architecture 2020

22 Downloads

1 bay Sun Shade Louvre with Parametic. Please let me know if the parametic failed. btw, I was just wandering why this rfa file get so big. I think the problem is at the parametic over the opening. in fact, I did try to change that parameter, it took me almost half an hour do get it done. Load into project too take a while. prehap the better is to specify material over the louvre panel (I did try one with metal with mesh!) & get away with the void openings! Haha.. Any Suggestions!

Product Version: Unknown

7700 Downloads

Double Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Revit Architecture 2016

8640 Downloads

Exterior Entrance Pair doors with pair side lights. 3 levels of detail, Detail level FINE show packers and jambs, heads and sill. Door panel material are changeable. Door created by nested families

Product Version: Unknown

11916 Downloads

Chevy Corvette Racer - Tuned Corvette. All materials are listed under C6 in the materials list. 

NOTE: AutoCAD file to large to download

FILE TYPE: Revit 2012 64 bit

UPDATE CONTAINS: Updated tail lights, body panel tweeks and default material adjustments.

Product Version: Revit Architecture 2012

9211 Downloads

Porsche Panamera - All materials are listed under PANAMERA for easy location in the materials listing.  As with all the others its set up to change the vehicles Colors of the vehicle, wheels, trim, and interior.

NOTE: AutoCAD file to large on this one to download

Comments Suggestions please.

UPDATE CONTAINS: Fixed door panel paint issue and some minor details adjusted.

Product Version: Revit Architecture 2012

15013 Downloads

I found this door online and did a LOT of work on it.  You can change the size, frame, panel configuration (glass or solid), handle, and material.  You can also show the door closed or opened (any  angle) in 3D as well as in Plan View (3D angle and plan angle do NOT have to be the same and are instance based).  It's my first family and I am pretty pleased with it.

Product Version: Revit Architecture 2014

9021 Downloads

In this Parametric door family a part from changing the size and materials as parametric option you will even have the option to change door panels like flush door or stile door panel. This is made in revit 2016 you wont be able to open it in older versions. If you find it useful please rate it. 

Product Version: Unknown

11208 Downloads