Single Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - my first upload so hope it works - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Unknown

9820 Downloads

Double Door - Fully Parametric - All elements are nested families and are completely parametric. Full Lite, Half Lite, and Flush Panel doors included. All Hardware included.

No Rating

Product Version: Unknown

9226 Downloads

Single hollow metal framed interior door. Parameters for frame depth, 2" vs 4" head, and wood vs metal door panel.

Product Version: Revit Architecture 2008

21908 Downloads

Double hollow metal framed interior door. Parameters for frame depth, 2" vs 4" head, and wood vs metal door panel.

Product Version: Revit Architecture 2008

29829 Downloads

Single hollow metal framed interior door. Parameters for frame depth, 2" vs 4" head, wood vs metal door panel, and lite size (Full, Half, or Narrow).

Product Version: Revit Architecture 2008

17682 Downloads

Fire Alarm Power Extender - Based on a Firelite panel. Contains power and fire alarm connections

No Rating

Product Version: Revit MEP 2008

1772 Downloads

This door has lots of parametirc options and most are instance based for flexibility.  You can change the size, frame, casings (on/off), panel configuration (glass or solid), handle, and material.  You can also show the door closed or opened (any  angle) in 3D as well as in Plan View (3D angle and plan angle do NOT have to be the same and are instance based).

Product Version: Unknown

8689 Downloads

This is a Raised Floor System model after Haworth's Raised Floor System. It is parametric, were you can set the FFE, change out the floor panel type, material, width, and length, ability to control the visibility of pedestals and finish floor tile. The Pedestal are set to be only visible in fine view mode

Product Version: Unknown

17984 Downloads

New Zealand Building code compliant 12mm toughened glass balustrade with 100 or 50mmØ S.S. clamp discs @ 400 crs (Actually it varies depending on how far between glass joints as they are spaced evenly.

This is a curtain wall, I create a curtain wall that has mullions @ 1500 crs max, then this is the infill panel. I leave mullions empty.

Product Version: Revit Architecture 2015

24070 Downloads

This door has elevation and plan swing lines for both ways.  The swing lines are set to only be visible in coarse and medium settings.  Material parameters set for the panel, both kick plates, and the door frame.  Made form Eliasons specs and documents.  Please rate and comment.

Product Version: Revit Architecture 2010

3969 Downloads

Single hollow metal framed interior door with sidelite. Parameters for frame depth, sidelite width, and wood vs metal door panel.

Product Version: Revit Architecture 2008

16669 Downloads

This curtain wall panel is an exterior, to look like a random fence of wood. Some proyects have it...

Check the parameter N to override the randomization of the vertical woods stick ( check the formula inside family)

C parameter will override the height.

Y parameters is distance vertical from bottom

YY parameters is distance vertical from top

Product Version: Revit Architecture 2011

22569 Downloads

Revit 2022

Door family with varrying panels of that style which can be switched with a family type parameter.

Parameters include:

- Width

- Height

- Frame Thickness

- Thickness (door)

- Center Rail Height

- Top Rail Width

- Center Rail width

- Side rail width

- Bottom Rail Width

- Trim Width

- Trim Thickness

- Handle Height

- Handle Inset

- New (instance)

- Existing (instance)

- Undercut (instance)

- Deadbolt On/Off (instance)

No Rating

Product Version: Unknown

314 Downloads

http://www.liversbronze.com/revit-files/

Revit files are now available for all Livers Bronze railing systems. Simply complete the form and submit your Revit file request. We will then send you an email with a link to download the Revit file. Once the file is downloaded, you can load it into the desired project model by following the provided instructions that are specific to each railing system.

The Livers Bronze Revit family systems contain customizable parameters which allow control of the height, rotation and visibility for all of the handrail’s balusters, glass lines and supports. Once unpinned, balusters, glass lines and support elements slide on the host rail to the desired location. Grips are provided for maximum adjust-ability as well as the visibility option of turning them on or off, or copying if needed. We have also incorporated structural alerts when certain elements have exceeded their design parameters in order to assure proper layout requirements. Once you have one element the way you want it, you also have the option to match properties to quickly repeat the desired look throughout your project.

Systems available:

Struct-U-Rail Button Blok MirageEmpire SingularIdentic Plank Matrix Razor IconAmerican 20/20 Belmont FontanaPanel

Keywords:

Glass Panel Railing, Cable Railing, Panel Railing, Perforated Panel Railing, LED Railing, Handrails, Wall Railing, Single Line Railing

Product Version: Revit Architecture 2014

3380 Downloads

This kitchen is made up of many nested families and is configured to serve as a kitchen/living area.  Custom shelving, cabinets, refrigerator, range, range hood, double sink, dishwasher, flat panel TV, and contemporary style countertops.  Some families found on RevitCity.

If you comment, I will know what needs to be fixed/adjusted.  (It is floor based, but I probably won't get around to changing that.)

Please rate and share.  Enjoy!

Product Version: Revit Architecture 2011

192291 Downloads

This is a door hinge which is a face based model.  When placed on the reveal of a door frame it allows another faced based model of a door panel (use the door's hinge edge as the face) to be placed on it. The family type variable opening angle can then be employed to open the door. This can also be used for opening windows.

Product Version: Revit Architecture 2014

3100 Downloads

This was done with the railing tool. Super clean and easy to use. Copy from the RVT file to your Project. If you get ambitious, add some piles and a no tresspassing sign.

NOTE:

You may need to adjust the material to ensure it looks correct. The chainlink is a model line drafting hatch.

Also, if you change the height, you will need to adjust the 'Chainlink Fence Panel' Profile to suit.

Good Luck - RFB

Product Version: Revit Architecture 2013

15571 Downloads

Cast an artistic, scalable graphic symbol on your plans with real-time shadows that adjust to your solar study. And when viewed in elevation, just wow!! A true picture of the fluid and ever-dynamic real-life environment on your designs.

Explore more of these free families at https://dartfamilies.com/

Product Version: Revit Architecture 2020

2356 Downloads

My best recreation of the Ricardo Conversation Sofa from King Hickory furniture.  Cushion are really hard to make look right! lol

Non-para.  Materials can be set for seat cushion, seat backs, body back and front deck, arms and outside body panel.

Made this for my wife who is an interior design student.  Hopefully it helps some others out there.

Product Version: Revit Architecture 2017

1972 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

11338 Downloads

Puerta interior de 1 hoja ciega, con apertura abatible / Interior door, single flush, blind panel

Más familias / more families: shop.a3d.es

No Rating

Product Version: Revit Architecture 2012

2849 Downloads

Fully parameterized model of the Jeld-Wen Model 1381 Flat Top Door.  Separate file to load sidelights.  Designed this for a project I'm working on.  Still pretty new to modeling; so, if you find any errors or issues please msg me.

Door can be found here:

http://www.jeld-wen.com/catalog/exterior-doors/custom/wood/glass-panel#group=All&model=model72

No Rating

Product Version: Revit Architecture 2015

4118 Downloads

One Nested Door having 2 Frames & 2 Leaves Make more than 100 TypesMulty lite varies 1Vx1H to 10Vx4H &Lites can be Glass or solid, 2ndry Frame width can be zeroVent Ht can be zero for door without Vent.Flush door can be panel door by inputing Mould depthSingle Rebate Wooden door frame can be change to double RebateHollow Metal door frame is double rebate onlyMaterial of different parts of door can be differentOperable 2D swing represent corresponding Leaf type3D swing is also operable, Grill Y/N in Vent

Product Version: Revit Architecture 2013

17584 Downloads

All dimensions and materials are parametric. 

Start/End Angle - allows to specify appropriate sector.

Rin = Radius inner 

Hdesk = Height of the desk surface from the floor

Wdesk = Width of desk surface

Tdesk = Thickness of desktop

Shelf = width of the shelf (from desk edge to show-surface) 

Tleg = Thickness of legs

Tlb = Thickness of legs bottom

Hshow = Height of glass showcase

Hpan = Height of decorative panel

No Rating

Product Version: Revit Architecture 2015

4858 Downloads

Premier SIPS, North America’s largest manufacturer of Structural Insulated Panels (SIPs), has been manufacturing SIPS for more than 20 years. Our testing and analysis programs have produced an extensive and comprehensive amount of proprietary data that allows us to help design professionals optimize designs with respect to both structural and energy concerns. Arming yourself with a SIPS product that is backed up with this accurate data helps you streamline the design process and make informed, dependable decisions.

Available at Autodesk: http://seek.autodesk.com/product/latest/agg/premiersipsbyinsulfoam/Premier-SIPS-by-Insulfoam/PremierSIPS

Premier SIPS by Insulfoam: Premier Structural Insulated Panels, SIPs, Structural Panels, Advanced Framing, Structural Wall Systems, Building Envelope Systems, Sandwich Panel, Pre-Fabricated Panel -

Product Version: Unknown

4916 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

8779 Downloads

MIFAB Series C1440-S (select model number with required plug pipe size) expandable line cleanout plug with tapping and 7” x 7” square, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs.

No Rating

Product Version: Unknown

72 Downloads

This is a White ceiling based artichoke pendant light, with metal inner supports for the 66 fins.  The pendant Height is adjustable as a parametric instance from the properties panel, so you may have different lights at their own individual pendant heights in your Revit project. 

Note: Use Revit 2021 or later for this .rfa.

This model very closely replicates the Artichoke Pendant Light manufactured by Eternity Modern.

Product Version: Unknown

7201 Downloads

Merry Christmas 2023! In Structural Insultated Panel (SIP) framing, the best header beam solution is typically two(2) wood members adhesively laminated to rigid insulation. This is also the best header for energy efficient wood framing.  This file is a parametric 3 section beam where two equal structural members of any width and depth are spaced apart as needed with a centered void left for insulation.  It seems to work fine but please judge for yourself and make improvments as needed. And Happy New Year 2024!

No Rating

Product Version: Unknown

311 Downloads

Merry Christmas 2023! In Structural Insultated Panel (SIP) framing, the best header beam solution is typically two(2) wood members adhesively laminated to rigid insulation. This is also the best header for energy efficient wood framing.  This file is a parametric 3 section beam where two equal structural members of any width and depth are spaced apart as needed with a centered void left for insulation.  It seems to work fine but please judge for yourself and make improvments as needed. And Happy New Year 2024!

No Rating

Product Version: Unknown

117 Downloads