R E V I T COMPONENTS, the #1 source for high-quality, parametric Revit® Families

 +

R E V I T COMPONENTS BLOG, keep updated!

Product Version: Unknown

5754 Downloads

480V to 208/120V standard150° or 115°C temperature rise available Copper windings and terminals standard CSL-3 2007 Final Rule efficiencies levels increased efficiencies help to gain LEED points

No Rating

Product Version: Unknown

520 Downloads

Made a countertop that has 3 nested sinks of 3 different sizes small, medium & Large.  It has a ton of parameters to turn off the other 2 sink sizes and you can turn off the backsplash too.  Has coutertop sink hole location so you can modify that to match the size of the sink and its location along the counter.

Product Version: Revit Architecture 2009

29434 Downloads

Rain water tank sits beneath topography with a slight rise above the surface for access and 4 connections at the base. I deal for use on small blocks to maximise space.

W 2440 x L 3780 x H 1270

Material (design is meant to be Poly), Length and width adjustable parameters and i have added pipe connections however i am not HVAC so others may be able to improve on the realistic fitting diameter sizing.

No Rating

Product Version: Revit Architecture 2015

3559 Downloads

Hundreds of more free downloads at >>

http://revitcomponents.blogspot.com/ 

♥ ♥ ♥

Product Version: Revit Architecture 2009

32004 Downloads

Based on Driade: Designed by Konstantin Grcic: Calder table

No Rating

Product Version: Revit Architecture 2009

2481 Downloads

A quick sketch of a tensile fabric shade made from Revit system roof.  Edit the roof footprint but keep the small pitched corners in place whatever shape you draw.

You may manually edit the column or rafters for any custom layout.

Edit the "Fabric" material for desired color or transparency -although the transparency adjustment often produces unexpected appearances.

Paste or link it into Revit file; there is no hosting in the components

No Rating

Product Version: Revit Architecture 2020

1395 Downloads

This kitchen is made as many separate families, loaded in one family. If you want to organize the kitchen your own way, you just open this family (complete kitchen), and then open one casework cabinet at the time, and load it into your project, one at the time.

Product Version: Revit Architecture 2010

158150 Downloads

Small Square Wall Tag w/ Architxt Font

Product Version: Unknown

3878 Downloads

VertiClip® SL connects the exterior curtain wall studs at head of wall to the building frame while allowing for vertical deflection of the structure up to 1 ½” (¾” up and down).

For more information on this product visit: http://www.steelnetwork.com/Product/VertiClipSL

No Rating

Product Version: Revit Structure 2010

734 Downloads

Stool generally used for the education market. Can be used as an art stool or in science. Plastic seat with a pleasing aesthetic using holes punched through. Seat has a small lip at the back for additional support. Sits on a steel sled frame. Manufactured by Hille Educational Products

No Rating

Product Version: Revit Architecture 2013

3116 Downloads

WATSON DESKING - SEVEN - No more need for traditional rectangles... 

(http://www.watsondesking.com)

This lil' Family is very parametric and includes 9 Types _ Enjoy! 

 Hundreds of more free downloads at http://revitcomponents.blogspot.com/

♥ ♥ ♥

Product Version: Revit Architecture 2009

1050 Downloads

PARAMETRIC COMPONENTS, the #1 source for high-quality, parametric Revit® Families

BUZZI HUB _ SIDE

http://www.buzzispace.com/products/buzzihub

Product Version: Unknown

1578 Downloads

very nice wooden coffee table. small, round, and completely parametric 

SUBSCRIBE https://www.youtube.com/channel/UCcJ9STQ6FbAl4nc7d1DiWTw?view_as=subscriber

Product Version: Unknown

2458 Downloads

very nice wooden coffee table. small, round, and completely parametric 

SUBSCRIBE https://www.youtube.com/channel/UCcJ9STQ6FbAl4nc7d1DiWTw?view_as=subscriber

Product Version: Unknown

1436 Downloads

Created to give a generic person shape in 3D with as little extraneous info as possible, but without looking clunky. No parameters.

No Rating

Product Version: Unknown

26 Downloads

Created to give a generic person shape in 3D with as little extraneous info as possible, but without looking clunky. No parameters.

No Rating

Product Version: Unknown

48 Downloads

Do you want to place an elegant corner kitchen as quickly as possible? You can try this file.

Place the kitchen and use the arrows INSTANCE to CONTROL THE lengths. You can show and hide the refrigerator and ovens if you have a small space for the kitchen. Good luck. Enjoy.

Product Version: Revit Architecture 2020

13702 Downloads

PARAMETRIC COMPONENTS, the #1 source for high-quality, parametric Revit® Families

BUZZI HUB _ SINGLE

http://www.buzzispace.com/products/buzzihub

Product Version: Unknown

1388 Downloads

Series SS009 Stainless Steel Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a stainless steel body construction, two stainless steel check valves, stainless steel check seats, hydraulically-operated relief valve, and stainless steel, vandal-resistant ball valve test cocks. Series SS009 is ideal in applications where the downstream liquid is of a composition where bronze material would be damaged or if it is desirable to eliminate trace elements of lead and copper. Series SS009 is ideal in industrial or plant applications, in medical/diagnostic equipment, in reverse osmosis systems, and for other health hazard piping systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar)

No Rating

Product Version: Revit MEP 2014

476 Downloads

This is a modified version of a manufactures coiling grille for recessed mounting for use in retail.  Side track is set to be flush mounted with drywall face instead of surface mounted.  Tube steel backup shown for reference but actual size should be coordinated with your engineer based on opeing size.  The TS 2x2  worked for my small application as a starting poing until the size was finalized by my engineers for a 6' x 10' opening.

 http://www.clopaydoor.com/bimfiles.aspx for large selection from manufactrer

Product Version: Revit Architecture 2011

4942 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 4 small scopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Removable Drip Tray

Small Scope Rack

Center Separator Scope Rack

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

178 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 8 small scopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Removable Drip Tray

Small Scope Rack

Center Separator Scope Rack

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

226 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. 

No Rating

Product Version: Revit Architecture 2020

2624 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Styles: Large or Small (Instance)This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Graphics" you can change both the number and size of the plates. These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish. Note: The Image is a sample of what it looks like when two sets of plates are stacked on top of one another. To do this, set the host of the second stack to the face of the first stack. 

No Rating

Product Version: Revit Architecture 2020

1647 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. It incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Its compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

546 Downloads

This is a simplified Revit family of a compact basement ladder (kelderladder), designed for architectural and structural applications where minimal space is available.

The model has fixed geometry and is **not parametric**.  

It’s intended as a lightweight and clean base version to quickly place ladders in small access zones such as basements or technical rooms.

✅ Fixed size  

✅ Clean 3D preview  

✅ Lightweight family  

✅ Revit 2025 compatible  

📦 Included:

- .RFA file (Revit 2025)  

- README.txt (incl. link to advanced version)

For the **fully parametric OTL-compliant version**, visit:  

🔗 https://secprojects.gumroad.com

No Rating

Product Version: Unknown

58 Downloads

Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

805 Downloads

This is the ‘one’ leaf that some people asked for. It is nested in the leaf 1 family that I upload not long ago. One can create few types for the leaf with deferent angles and material and insert back to the Leaf 1 family.

nirim

No Rating

Product Version: Unknown

3565 Downloads

Series 757, 757N Double Check Valve Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Its compact housing consists of two independently operating tri-link check valves, two shutoff valves, and four test cocks. It features a stainless steel housing and sleeve and is 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

386 Downloads