BLITZ 4 WINDOWS

Art. S.4089W 1 MODULES COB 3000K  220-240Vac 1867lm 17.4W CRI 90 MacAdam step 3Rated luminaire luminous flux: 303lmRated input power: 18.1WLuminaire efficacy: 17lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCELuminaires come with toughened glass lenses already installed using the appropriate "lens-carrier slide". These may be substituted with coloured dichroic lenses. INSTALLATION AND MAINTENANCEA robust, die-cast aluminium cap is secured to the base with four stainless steel screws. WIRINGDouble cable entries with PG13,5 (Ø 7÷12 mm) cable glands. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.9 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1074 Downloads

POOL SPOT

Art. S.3693 12 MODULES LED RGBW (W=6000K)  24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp  fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1086 Downloads

BLINKER

Art. S.6080W 1 MODULES COB 3000K  220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

263 Downloads

CATCH SQUARE 4LED

Art. S.7406W 4 MODULES LED 3000K  220-240Vac 620lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 415lmRated input power: 7.8WLuminaire efficacy: 53lm/WElectronic ballast  DALI 2 / PUSH CELUMINAIRE TYPEFalse ceiling-recessed down-light fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Aluminium front trim or Marine grade stainless steel AISI 316L front trim. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08LIGHTING PERFORMANCEThe led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Toughened  transparent  glass 5mm thick. Lamp  adjustable ±20° position. LOR -- INSTALLATION AND MANTEINANCEThe luminaires are fixed to the falseceiling by a heavy-duty bracket system, adjustable. WIRINGLuminaire hard wired with 0.4m H05RNF cable, supplied with IP67 connector . Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 1.84 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2019

200 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

724 Downloads

Contents:

Cabinet with  doors

• Dimensions are parametric, depth, height, width, handle placement


• Materials: cabinet, door, handle

Cabinets Drawers

• up to five drawers with visibility


• dimensions are parametric; depth, height, width, drawer height


• drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.


• Materials are parametric

Plinth

• Parametric dimensions (instance) material parameter.

Worktop L shape (with/without sink)

• Lengths, depths, heights, and thickness all instance parametric

Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric

Misc parts face based

1. Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)


2. coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials


3. coffee mug: fixed dimensions, parametric materials


4. Microwave; fixed dimensions, parametric materials


5. faucet: fixed dimensions, parametric materials based upon an old Sphinx one

Misc generic model

1. Sink: parametric (instance) dimensions and height based upon floor height.

For any qeustions, 'bugs' etc. contact me by personal message

disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.

Notice: Everything under constraints is calculated and should be left alone.

standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.

Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this.

No Rating

Product Version: Revit Architecture 2016

3170 Downloads