 |
MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 18 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 18 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
550 Downloads
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
149 Downloads
|
|
|
 |
Simple adjustable Bilco basement bulkhead |
No Rating |
Product Version: Revit Architecture 2020
2281 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
82 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
71 Downloads
|
|
|
 |
Dinner setting with silverware, plate, glass, and placemat. Fully parametric. Should be able to change all materials. |
|
Product Version: Revit Architecture 2009
29254 Downloads
|
|
|
 |
Walnut table with river shape glass inset. Adjustable perameters. |
|
Product Version: Unknown
958 Downloads
|
|
|
 |
A bottle of wine, fresh from the vineyard and two crystal glass'. Renders well! |
|
Product Version: Unknown
11767 Downloads
|
|
|
 |
just a basic wall based family with no parametric control. Insert it as a component; classified as a "Communication Device"
Breaks the Acoustical Barrier with Clear, Reliable, Hands-Free Two-Way Conversation
Standard Unit Fits 1/4" to 1" (6 to 25 mm) Glass
Level 1 and Level 3 Bullet Resistant Models Adapt to Various Glazing Materials
This CRL Thru-Glass Two-Way Electronic Communicator is a self-contained, easily installed device that allows clear, intelligible two-way conversation in locations where security must be maintained. The unit is automatically activated when the clerk speaks for hands-free operation. Incorporating the finest electrical design, you can select either the 115V AC model, or the 12V DC battery powered model. Units are available in Standard or Deluxe Models in satin anodized finish. |
No Rating |
Product Version: Unknown
1837 Downloads
|
|
|
 |
Insertion-Style: Face-Based. Parametric: Width, Depth, Height, and Material. Types: Hinged or Top-Sliding. Visibility: Coarse, Medium, and Fine varries. While the box itself is fully-parametric, the shoe-support is not. That is why I decided to make the box un-breakable by using "if" statements. That is to say, if a dimension becomes smaller than the shoe-support, it will revert to a pre-set value. Regarding the visibility, it will progressivley loose details as-needed (showing up as a simple box when "Coarse" is selected). |
No Rating |
Product Version: Revit Architecture 2020
259 Downloads
|
|
|
 |
300 x 300mm Slate Step with 100 x 100mm Frosted Glass at center |
No Rating |
Product Version: Revit Architecture 2013
8866 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
84 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
70 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
78 Downloads
|
|
|
 |
These Indian style door windows are created as per actual elements in use.
Banarasi Door & Windows
1 Wooden frames are created from wood log section per design of CPWD India. the design prevents plaster damage around door window frames when face flushed with wall face. Insert in frame may be removed by using insert=0. A chanel is made all aroun middle of frame to hold a perforated 6mm dia pipe to inject pest control liquidin it periodically, to protect door frame from termite etc.
2 Multiple door leaf shutters can be swipe to make a new door. Multy lite shutter can be utilise for one fully glazed panel to multy lite, simply by adjusting the vertical & horizontal numbers.
3 window frames are made from same log sections.Sunshed, Side fins & Sill proj set to zero if not req. Any of them can be set independently.There is provision for Frame extension and rebate can be made on both side if req.Safty grills have been provided in each opening & it adjust according to frame dimensions. M.S.Sq bar & M.S.Flat size can be set manually for grills.
4. window shutters are multy lite shutters & number of lites can be set. Mullions in Ventilator & Lowlite can be visible or not. Ht of ventilator & low lite can be set to zero if not req.
5. windows are marked by hor bay numbers, like 1A,1B, 2A, 3A etc.
6.All shutters are provided with 2D & 3D swing. Door shutters are inswing while window shutters are out swing as used in Indian culture.
7. use families after studdying the parameters. Window width is restricted as per actual use.It is better to handle the family after loading in project.
8. Any querry can be done on my phone number 91 9919640999
9. Welcome for further help. |
No Rating |
Product Version: Revit Architecture 2018
131 Downloads
|
|
|
 |
Rectangular Display Case - Glass Panels
+ Wood Cabinet
Visit my website at http://www.4u2cdesign.com
|
|
Product Version: Revit Architecture 2010
8883 Downloads
|
|
|
 |
I looked everywhere for this blown glass pendant. I'm extremely new to Revit, so this was my first shot! You can use just one, the group, or add to the group... |
|
Product Version: Unknown
6012 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
|
Product Version: Revit Architecture 2012
1836 Downloads
|
|
|
 |
This is a TV stand with two glass shelves and also the HD TV |
|
Product Version: Unknown
8094 Downloads
|
|
|
 |
Almost fully parametric. Height, width, frame size, handle height. Frame, door panels - materials.
Please leave comments and suggestions. |
No Rating |
Product Version: Revit Architecture 2012
6352 Downloads
|
|
|
 |
Gloss Brass Handle, Lock set, Latch & Mounting PLate. Place in Floor plan with an offset of 3'3" |
|
Product Version: Unknown
2421 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for zip files of all our Kolbe Revit models. |
|
Product Version: Revit Architecture 2010
2240 Downloads
|
|
|
 |
Go to www.kolbe-kolbe.com for zip files of all our Kolbe Revit models. |
No Rating |
Product Version: Revit Architecture 2010
2432 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
No Rating |
Product Version: Revit Architecture 2012
655 Downloads
|
|
|
 |
Go to http://www.kolbe-kolbe.com/products/index.cfm?pcID=4&pID=70&pCat=24&pSubCat=0&pl=150 for more families and components of the VistaLuxe Collection.
For product-related questions, please email architects@kolbe-kolbe.com |
|
Product Version: Revit Architecture 2012
922 Downloads
|
|
|
 |
Media tower with one drawer and four glass shelves. Width, depth, and materials are parametric. Modeled after a unit that Target sold a few years back. |
No Rating |
Product Version: Revit Architecture 2014
1058 Downloads
|
|
|
 |
Just a simple glass topped coffee table. Parametric.
|
|
Product Version: Revit Architecture 2016
11719 Downloads
|
|
|
| |
Custom legs with a glass table top |
|
Product Version: Unknown
99 Downloads
|
|
|
 |
Tempered glass topSlide-out keyboard and mouse trayCD storage racksSeparate CPU compartment Dimensions: 44W x 24D x 50H inches |
|
Product Version: Revit Architecture 2010
7980 Downloads
|
|
|
 |
Repost the previous post for fix the missing opening cut error, tested image render by PC.
Full pareameter of Cans size, materials, on/off glass cover,... |
No Rating |
Product Version: Unknown
23173 Downloads
|
|
|
Search