Aluminum & Glass ICU Door with 1 sliding panel

Product Version: Unknown

9274 Downloads

Barn door with glass paneling

No Rating

Product Version: Unknown

2755 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

17862 Downloads

This is a double door using the sliding barn door hardware. This is a basic family, but it works well. You can change the door width and height through the types. I based this loosley on the Real Carriage DoorCo. Swiss Rod

BASED ON malfonsi VERSION W/ OFFSET AND TRACK LENGTH PARAMETERS

ALL CREDIT GOES TO malfonsi

Product Version: Revit Architecture 2018

4918 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

18411 Downloads

This lock as an external key access with internal thumbturn, clamped to glass doors.

Product Version: Revit Building 9.1

6616 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

11334 Downloads

Made this for a project. I thought it was worthy enough to upload. It is Fully Parametric... so far haha

Materials are for you to change. It's just generic for now!

I created this in Revit 2015

Product Version: Unknown

6257 Downloads

Single Door - Full Glass - Existing in plan

No Rating

Product Version: Unknown

2349 Downloads

Glass door refridgerator, used to display merchandise

Product Version: Revit Architecture 2011

5396 Downloads

Overhead Sectional Glass Door

Product Version: Unknown

2151 Downloads

Double Pocket Door With Glass

Product Version: Unknown

14992 Downloads

This is my first upload so please be gentel.  This is a simple family that allows you to place a shower partition with a curb on 4 sides and glass for the partition, in a room.  You can change a lot,

• Curb Heights - independent on all 4 sides


• Curb depth


• Overall Height


• Overall Width (you should be able to use align and lock to make it stretch.


• 2 - Panel or 3- Panel glass partition


• Each partition door has a 2D 45 degree rep for plan view.


• Each partition configuration allows you to put in two override dimensions that I will try to explain.


• Override Panel Width - If you need one of the panels to be say "6" use this to do that.  When this is set to 0 it should return to equal equal.


• Override Door Width - If you need the door to be a certain width say 30" enter it here.

This model is not foolproof, although I did do a few basics to keep people out of trouble, like a minimum door height and glass thickness.  But if you try to specify a panel override width and a door override width on the 2 panel with the curbs locked to the wall it will probably break.  However if you do that on the 3 panel, the 3rd panel will take up the slack.

Please leave your comments for me.  Thanks.

Product Version: Revit Architecture 2013

18433 Downloads

 THIS IS A DOOR W/ SOLDIER COURSE AROUND 3SIDES AND A KEYSTONE @ TOP CENTER

Product Version: Unknown

8490 Downloads

Improved parametric hollow metal doors from my post dated August 31, 2011.You can open the "Door Schedule View", switching "Door Type" from #1 thru #4, and watching the door panel changes on 3 D view.You can also check/unckeck "Exterior Door", to swith the "(5) GLASS" from "SG" - safety glass, to "SGI" - safety glass-insulated.If you like it, you can download the door families in  the drawing mentioned above as bases, adding parameters shown here, and creat your own set of parametric door families. Enjoy!

Product Version: Revit Architecture 2009

8778 Downloads

This is a fully Parametric Double Door family I have been working on it for awhile. It has the ability to be solid, half-glass, and full glass. You can control all of this by checking the on/off boxes in the type properties. It has the option for no tim, trim on one side or both sides. Make sure that glass width and height have a value even if you are using the solid flush option otherwise family will not work.

Product Version: Revit Architecture 2011

9247 Downloads

Residential entry door similar to one made by Masonite.  The family includes several sizes.  The glass will not have a design unless you add a relief to the glass in the material dialog box.

Product Version: Revit Architecture 2013

14877 Downloads

AGRV_Door_GlassSlidingDouble_雙落地窗門

Metric Double Bypass Sliding door (Glass) with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

3368 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

4918 Downloads

Here is a parametric door family in CMU wall with customized door schedule to match our office one.This one can show unequal leafs, different swing angles, lites, glass type on schedule; frame depth and frame setback are all parametric.1. The leaf sizes is "Type" dependant, a pair of 3'-0"/2'-0" x 7'-0", will be shown PR. 3'-0"/2'-0"x7'-0" on schedule. -if you need a pair of 3'-0"/1'-4" x 7'-0" door, you can duplicate 3'-0"/2'-0" x 7'-0", go to "Element Property" cahnge the "Width2" to 1'-4" and rename it accordingly, it will show on schedule.2. The swing angle is an "instance", you can click the door #11, go to "Element Property" change "Swing angle" to 50, it will be changed on plan.3. The lite in active panel has three configurations, and a flush one. -go to door schedule view, under "Door Type" not "(2) DOOR TYPE", for Door # 12, if you change the number to 3, then go to 3D view, you can see the lite changed.4. Type of glass is an "instance", you can un-check the box "Exterior Door" on Door Schedule, the "(5)GLASS" will be changed from SGI to SG. SGI- safety glass insulated, SG-safety glass.5. Frame depth and setback (for masonry wall) are all "Family dependant", since I think that each project should have the same setback, if you want, you can modify  it and make it a "Type" or "Instance" parameter.Then you can go to Sheet A101 to see the print format of the door schedule.

Merry X'mas and happy New Year for all.

Product Version: Revit Architecture 2009

5162 Downloads

This is a curtain wall panel family of a double sliding door.

Product Version: Revit Building 9.1

7680 Downloads

Modified version of the arched door, this one has 6 clear glass panes on the door and 7 on the frame

No Rating

Product Version: Revit Architecture 2008

1479 Downloads

Aluminum and tempered glass window showing handles. All dimensions and materials parametrized. Metric.

Product Version: Revit Architecture 2008

44054 Downloads

Single Door w Full Glass - HM DW Frame

Product Version: Revit Architecture 2008

13163 Downloads

6 pane, 4 sliding, 2 fixed.

No Rating

Product Version: Revit Architecture 2013

7111 Downloads

This double door is fully parametric.

Product Version: Revit Architecture 2014

32318 Downloads

glass - double acting

No Rating

Product Version: Unknown

6344 Downloads

glass - double acting

No Rating

Product Version: Unknown

14503 Downloads

Works fine in Curtain Wall

Product Version: Revit Architecture 2013

71686 Downloads

Multi-panel garage door for widths of 9 feet or more. Number of panels is fixed; the frame is metal.

Product Version: Revit Building 9

48190 Downloads