Full series of sizes in one family. Variable materials and sizes, ability to change muntin patterns, trim materials and sizes, turn trim and head on and off (allowing multiple units). Also includes unit size parameter and u-value parameters and a small triangle that shows up in plan only for those sizes that meet egress requirements.

Product Version: Unknown

4316 Downloads

Revit 2021 Line Based Detail Item Stair or Ramp Arrow Family.

Parameters include: Visibility of "Slope Label", "UP/DN Label", "Arrow Head", "Dot" as well as a rotation for the "UP/DN Label" and offsets for label positioning and arrow and dot sizes.

No Rating

Product Version: Unknown

1107 Downloads

Parametric Materials

Parametric Weather Head Height and Direction

On-Off Upper or Lower EMT

21.5" x 37.31" x 5" Fixed Size

FB Page: https://www.facebook.com/JobeConstruction/?ref=bookmarks

No Rating

Product Version: Revit Architecture 2020

848 Downloads

Single hollow metal framed interior door. Parameters for frame depth, 2" vs 4" head, and wood vs metal door panel.

Product Version: Revit Architecture 2008

21903 Downloads

Double hollow metal framed interior door. Parameters for frame depth, 2" vs 4" head, and wood vs metal door panel.

Product Version: Revit Architecture 2008

29820 Downloads

Single hollow metal framed interior door. Parameters for frame depth, 2" vs 4" head, wood vs metal door panel, and lite size (Full, Half, or Narrow).

Product Version: Revit Architecture 2008

17682 Downloads

Single hollow metal framed exterior door with half lite. Parameters for frame depth and 2" vs 4" head

Product Version: Revit Architecture 2008

11180 Downloads

Fully parametric – Works similar to the stock standard downpipe that ships with Revit.

Rain Heads prevent debris from entering rain water tanks and reduces tank maintenance.

Quite common in Queensland, Australia.

I was designing my own house and wanted to detail it. Now I want to share it.

Hope someone out there will find this useful.

Product Version: Revit Architecture 2010

5018 Downloads

MIFAB C1470 Series lacquered cast iron stack cleanout with threaded bronze cleanout plug and ¼” NPT. access hex head plug.

No Rating

Product Version: Unknown

212 Downloads

Detail item (plan view) of a generic studrail network for one side of a rectangular column. Easy to place and dimension without making heavy 3d detailing.

Occurence parameters for number and spacing of studs, number of rails, dimension of the column side and offset of the first stud from column.

Type parameters : width of the rail and stud head diameter

Sorry my parameters names are in french!

No Rating

Product Version: Revit Architecture 2020

242 Downloads

VertiClip® SL connects the exterior curtain wall studs at head of wall to the building frame while allowing for vertical deflection of the structure up to 1 ½” (¾” up and down).

For more information on this product visit: http://www.steelnetwork.com/Product/VertiClipSL

No Rating

Product Version: Revit Structure 2010

734 Downloads

Parametric 3/4"Ø A325 Heavy Hex Bolt. Grip is an instance paramter. Based on grip, formulas determine bolt length and weight (shared parameters) which allow for scheduling and more importantly, bolt list with bolt lengths. Parametric void to cut hosted framing. Bolt visibility paramters are also in place plus an instance parameter for a welded nut (moves the washer to the bolt head side of grip) Based on Portland Bolt specs. Revit 2012.

Product Version: Revit Structure 2012

16396 Downloads

Parametric Detail Componenet. An improvement on the OOTB Bolt - Side Family. My biggest beef with this family has always been no washers! Instance parameter adds a washer to the head end or the nut end or both. Instance parameter adds a symbolic bolt hole thru the bolted assembly. Bolt shaft is also a instance parameter. I typically only use A307 3/8"Ø, A325 1/2"Ø, A325 3/4"Ø or A325 1"Ø bolts so these are the only types. Parameters exist though to add more. Type parameters are based on values from Portland Bolt. Revit 2016.

Product Version: Revit Structure 2016

2543 Downloads

This is part of a pool table and accessories family that can be found at: http://littledetailscount.com. The complete family contains: pool table, cue sticks, bridge stick with bridge head, balls (white & 15 numbered balls), racks (for 9-ball or 15-ball games) and blue chalks; ceiling based family of tiffany lamp; wall based families of the wall cue rack and wall cone chalk holder.

Product Version: Revit Architecture 2011

13633 Downloads

Metal frame doors - detailed frames with stops.  Standard 5 3/4" frame with adjustable frame depth.  Can adjust setback from wall face - default 1/8".  Rough openings will include frame width.  Has lockset in elevation & 3D views.  Door sizes 2'6", 2'8", 2'10", 3'0", & 4'0" x 7'0" - can add or adjust sizes.  Default frame width 2", frame head 4" - can adjust sizes.

No Rating

Product Version: Revit Architecture 2010

1495 Downloads

Download: http://geberit.bimobject.com/180100112

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

-The Geberit AquaClean 8000plus leaves nothing to be desired and offers many extra pampering functions in addition to the shower function: the spray temperature and intensity can be adjusted to suit your personal preferences. The pulsating massage function has an invigorating effect, while the soft lady wash is ideal for ensuring gentle personal hygiene for women. As soon as you sit down on the shower toilet, the automatic odour extraction function switches on, creating a pleasant ambience of freshness in the room. After the spray has finished, the integrated warm-air dryer dries you off in comfort. The final practical touch: all functions can be individually adjusted and your preferences saved via remote control.

Product Version: Revit Architecture 2014

11239 Downloads

This is a fake section marker provided by www.Revitopia.com. As a 2 click operation, it utilizes line based detail component and embedded annotation objects. There are 3 primary parameters; Sheet(where you put the sheet number), Detail(where you put the detail number), and Head angle(to rotate the bubble). This was a solution to the use of AutoCAD Details being on a Revit project and to avoid creating “fake” detail views for placing on sheets.

No Rating

Product Version: Revit Architecture 2009

1905 Downloads

Selux spent several years in research and development to achieve the aesthetic design and maintenance-free functionality of Sonne, our first totally solar powered luminaire. Off-grid locations need not be off bounds any longer. Equipped with one of a variety of different size solar panels, sealed-gel batteries, and a fixture head fitted with from 26W to 32W compact fluorescent lamps, Sonne is environmentally friendly and can be installed very quickly. This excellently designed lighting system incorporates many innovative features, such as the Smart Controller programmable regulator which controls flow of energy from panels to batteries and lamping. No cabling, no trenching, no wiring, and no electric bills! Sonne carries a 25 year warranty on power output of solar panels. Solar powered lighting from Selux in a quality product, find out more about SONNE!

No Rating

Product Version: Revit Architecture 2010

10060 Downloads

Selux spent several years in research and development to achieve the aesthetic design and maintenance-free functionality of Sonne, our first totally solar powered luminaire. Off-grid locations need not be off bounds any longer. Equipped with one of a variety of different size solar panels, sealed-gel batteries, and a fixture head fitted with from 26W to 32W compact fluorescent lamps, Sonne is environmentally friendly and can be installed very quickly. This excellently designed lighting system incorporates many innovative features, such as the Smart Controller programmable regulator which controls flow of energy from panels to batteries and lamping. No cabling, no trenching, no wiring, and no electric bills! Sonne carries a 25 year warranty on power output of solar panels. Solar powered lighting from Selux in a quality product, find out more about SONNE!

Product Version: Revit Architecture 2010

5373 Downloads

Series 774 Double Check Valve Assemblies prevent the backflow of polluted water from entering into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body and low head loss. Series 774 is ideal in applications identified by local authorities as non-health hazard. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

514 Downloads

This is a modified fake section marker provided by www.Revitopia.com. As a 2 click operation, it utilizes line based detail component and embedded annotation objects. There are 3 primary parameters; Sheet(where you put the sheet number), Detail(where you put the detail number), and Head angle(to rotate the bubble). This was a solution to the use of AutoCAD Details being on a Revit project and to avoid creating “fake” detail views for placing on sheets.

No Rating

Product Version: Revit Architecture 2014

1586 Downloads

Series 774DCDA Double Check Detector Assemblies prevent the backflow of fire protection system substances from being pumped or siphoned into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body, thermoplastic and stainless steel check valves, and low head loss. Series 774DCDA can be installed in the horizontal or vertical flow-up positions. It is designed for installation on applications identified by local authorities as non-health hazard, such as on fire protection systems. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

608 Downloads

MIFAB® MI-FLEX-DISH-1 dishwasher connector is manufactured out of a flexible PVC compound that meets the requirements of ASTM C-564. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws provide the sealing force.

No Rating

Product Version: Unknown

56 Downloads

MIFAB® Series MI-TEE (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-TEE Series of flexible tees are listed with I.A.P.M.O. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

353 Downloads

This updated version includes additional control parameters. Also family can be easily converted into a "Fake elevation marker".

This is a modified fake section marker provided by www.Revitopia.com. As a 2 click operation, it utilizes line based detail component and embedded annotation objects. There are 3 primary parameters; Sheet(where you put the sheet number), Detail(where you put the detail number), and Head angle(to rotate the bubble). This was a solution to the use of AutoCAD Details being on a Revit project and to avoid creating “fake” detail views for placing on sheets.

Product Version: Revit Architecture 2014

2833 Downloads

MIFAB® Series MI-ELB (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-ELB Series of flexible couplings are listed with I.A.P.M.O. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

255 Downloads

MIFAB® Series MI-FLEX (specify size) of flexible rubber couplings are manufactured from neoprene compound that meets the requirements of ASTM C-564 and 300 Series of stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws. MI-FLEX Series of flexible couplings are tested and certified to ASTM Standard 1173-2010 and CSA Standard B602-2016 and listed with I.A.P.M.O.

No Rating

Product Version: Unknown

130 Downloads

MIFAB® Series MHY-30 exposed type, self draining, moderate climate low lead wall hydrant with A.S.S.E. 1011 certified anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

194 Downloads

MIFAB® Series HY-3000-NPB exposed type, self draining, low lead, moderate climate wall hydrant with A.S.S.E. 1011 certified antisiphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

173 Downloads

This is the raw geometry for a pan and tilt style like might be found on a tripod head.  This uses three nested Families using Marello Sgambelluri's excellent Revolve tool in two different axes.  The Gizmo resently represents a camera style mount, but the Families can be modified to need.X-Y plane revolve uses "Pan"; Y-Z uses "Tilt."

No Rating

Product Version: Revit Architecture 2015

225 Downloads