This is my actual room cabinet I made using model-in-place component. Pls feel free to use it :)

Used Revit Architecture 2019 (student version)

you could edit the family to change it's dimension

Product Version: Revit Architecture 2015

4552 Downloads

This is a wall sweep to simulate HardiePlank - Design Collection - Custom Beaded.  The profile is both inward and outward. The insertion is the bottom inside corner to your face of wall. It slants into the wall face. It is 8" High and designed to overlap 1 1/4" - Just like the real thing. Because of the overlap, use is tricky. You (probably) won't be able to array the sweep. You have to first copy it up 8" - then move the copy down 1 1/4". For some reason, Revit will not allow you to copy it up 6 3/4" - Don't know why. Maybe becase of the triangular inset. Of course, you can place them one at a time but I prefer to do the bottom row of a whole house first, then copy the entire thing upward. Hope you find this one useful. You probably wouldn't want to use this technique for really large projects but for most Residential it works just fine. Enjoy.

No Rating

Product Version: Revit Architecture 2012

4219 Downloads

No Rating

Product Version: Unknown

37 Downloads

No Rating

Product Version: Unknown

50 Downloads

Exterior decorative site light fixture

No Rating

Product Version: Revit Architecture 2008

7007 Downloads

Larger, wall based unit. Size of the box which is embedded in the wall 5" is 18" x 12" x 6". The heating unit is embedded inside of the box. It has two small valve extrusions on the bottom that appear to run through the bottom of the box.

No Rating

Product Version: Revit Architecture 2011

5038 Downloads

Fully parametric. You can change the width, height, depth, number of shelves, and trim width, and the materials. 

the difference between this and the other one is that you can choose how many shelves you want.

REVIT 2016 (not 2015)

Product Version: Revit Architecture 2015

9080 Downloads

Rinnai VT26 gas califont,  wall based.

MEP connections for gas supply, cold water IN, hot water OUT, 230 v electrical power supply,  no condensate drain  (optional on this model),  materials for  white spray painted metal case, manufacturer logo, copper tubing.

CBI (NZ)  Liquid  71-26 hot potable water reticulation systems

Has local NZ gas regulations module placement on wall relative to window or doors, dowpipes, balconies, internal corners and ground lines as diagram with Yes/No parameter control -  place the unit on the wall and the unit and diagram appear, move to suit the annotated lines until module in correct  place,  click then select Properties and turn off the 2D diagram,  leaving the module alone on the wall.

Modeled from local NZ Rinnai web site  literature.

Revit 2018

Product Version: Unknown

592 Downloads

Parametric tile and grout detail component for a variety of tile types

Improved version

Product Version: Revit Architecture 2014

3616 Downloads

Parametric Sq wall opening with swapable fill Patterns and with or without Trim. 10 patterns to choose from. all parts of patterns are auto adjusted according to sq size 100mm to thousans of mm. Materials of diff patterns & Trim can be selected independently. Patterns can be off for clear Sq opening. O pattern is extra in front of main pattern, which can be off if not req. Array of thes openings By Er.L.J.Upadhyay +919919640999q

No Rating

Product Version: Revit Architecture 2018

108 Downloads

A non-wall hosted Fire Hose Reel for those unlucky enough to not have a wall to nail this thing too.

No Rating

Product Version: Revit Architecture 2011

5569 Downloads

Afternoon ladies and Gents

Heres my latest model, a nice looking Electric Guitar.

I'm no musician so excuse the naming of some of the materials, but i've tried my best. I created this by loading in a Guitar outline and drawing extrusion lines around it and scaled up to the best i could. Dont think this is far off in terms of size.

I used this for a render of a room whos owner has a collection on the wall.

Simply create your own wall hangers and place it to suit.

This is a generic based model for freedom of position.

Enjoy

Product Version: Revit MEP 2014

5106 Downloads

Wall based, Revit 2103 version.

Flue has Yes/No control, is hosted in wall but with no real need for a void there.

Material controls for flue sections and roof downdraft diverter

Manufacturers stock colours built in to heater so load family into project and hit render  = good to go.

No Rating

Product Version: Revit Architecture 2013

3969 Downloads

Simple, easy to use.  Wall based toilet paper dispenser set at ADA height.  Flexes to different wall thicknesses.  Contains a left and right strong reference for easy alignment.  Classified as Plumbing fixture for ease of scheduling and Visibility options.  Please notify me of any problems so that I can update the family.

Product Version: Revit Building 9.1

13163 Downloads

Wind turbine 6 feet in diameter, wall constraint  

Some people say that wind turbines are a sore eye, but what if you place wind turbines in commercial sculptures or contemporary pillars/monoliths, we can have them but almost hiding them.

Product Version: Revit Structure 2012

2434 Downloads

http://www.vtourinteractive.com/blog

No Rating

Product Version: Revit Architecture 2010

1701 Downloads

Gives the choice of choosing either field or corner panel.

Usefull when one wants a structural glazing corner with no mullion.

Also, by clearing both types (corner or field panel) gives an empty panel.

Angle of junction - parametric.

No Rating

Product Version: Revit Architecture 2010

4712 Downloads

New Zealand Building code compliant 12mm toughened glass balustrade with 100 or 50mmØ S.S. clamp discs @ 400 crs (Actually it varies depending on how far between glass joints as they are spaced evenly.

This is a curtain wall, I create a curtain wall that has mullions @ 1500 crs max, then this is the infill panel. I leave mullions empty.

Product Version: Revit Architecture 2015

24072 Downloads

Product Version: Revit Structure 2018

1379 Downloads

Transfer Switches are designed for a variety of standby power applications for critical loads and offer an enhanced set of features that will meet your application requirements. They minimize initial equipment costs, reduce installation time, and increase system reliability.

Product Version: Unknown

1442 Downloads

Product Version: Unknown

2061 Downloads

Parametric tile and grout detail component for a variety of tile types

No Rating

Product Version: Revit Architecture 2014

1652 Downloads

Gallus 2000-NG4 Gas Meter for utlity reticulation at property boundary

Wall hosted,               Category Speciality Equipment

White painted metal sheet cover with On/Off control

Adjustable length gas supply pipe (instance parameter), adjustable position on wall for unit.

Plan View only shows Gas  meter icon graphic.

Gas label has distance from wall control to suit different view scales / personal prefs.

Materials partly assigned so User needs to check mats before render otherwise shaded views set up.

Product Version: Revit Architecture 2013

6454 Downloads

No rights to this emulation of David C Roy original - to scale placeholder only - 2023.rfa

No Rating

Product Version: Revit Architecture 2020

2009 Downloads

Generic model

Size and material adjustable

Modeled in Revit 2020.

CREATIVITY IS FUN! ENJOY!!

No Rating

Product Version: Revit Structure 2020

984 Downloads

This is one I have made, I am not that good on Revit as yet!  It was made to go with Enscape. The glass bulb has to have a material of Transulcent glass applied and a wattage of about 10,000. The material is supposed to be brass, but does not come out too well. The Geometry is there, play with the materials. Revit 2016.

No Rating

Product Version: Revit Architecture 2016

1188 Downloads

I updated this to allow for different thicknesses of walls. It will create a 4" interior portion of wall and you can have a 4" (or any size larger) exterior portion of the wall. It's loosely based off Weiland exterior sliding pocket doors. This newer version keeps the model objects visible and does not have symbolic/model lines for plan view.

Product Version: Revit Architecture 2009

19662 Downloads

A simple parametric fixed window. What makes it different is that it is face based instead of wall based. I made it because I needed to put windows in the side of a pool which wasn't a wall family, it was a generic model. So if you have the same problem, here you go. 

you can change the height, width, window inset, and thickness and depth of the bracing. 

No Rating

Product Version: Revit Architecture 2016

7561 Downloads

Left hand shelf basin, not wall hosted, no tap. First upload aswell! Thanks.

http://www.caroma.com.au/bathrooms/basins/opal/opal-720-wall-basin-left-hand-shelf -- to see the product.

No Rating

Product Version: Revit Architecture 2012

2333 Downloads

MIFAB® Series MHY-30 exposed type, self draining, moderate climate low lead wall hydrant with A.S.S.E. 1011 certified anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

195 Downloads