 |
Parametric Window
Change wall thickness acco.to your wall
Materials,Widh of two panels,Height can be changed
|
|
Product Version: Revit Architecture 2015
14156 Downloads
|
|
 |
This desk was designed to be used up against a wall on the left side. The front/top counter drapes around the wall and sticks out about 6" into the hallway. Thought I would share just in case someone else came up with this same scenario and needed a desk similiar. |
|
Product Version: Revit Architecture 2013
38463 Downloads
|
|
|
| |
Created in Revit 2009, based on Grenheck Models |
No Rating |
Product Version: Unknown
343 Downloads
|
|
|
 |
What is revit bad at? Sitework. What else is revit bad at? Railings.
So here's a lovechild of revit's two weaknesses that's actually somewhat powerful--A baluster of stacked rocks that tessalates to form a retaining wall.
With revit 2018's new feature that allows railings to follow topography, You can place a railing on smoothly-graded surfaces like paths and roadways and use this baluster on a 4'-8" spacing to achieve a decent, low-effort look.
Enjoy. Improve the rocks at your leisure.
EDIT: This is a BALUSTER which is a component within a railing. Take a default railing, switch out the posts/balusters for this at a 4'8" spacing. |
|
Product Version: Revit Architecture 2018
10644 Downloads
|
|
|
 |
its fully parametric |
|
Product Version: Revit Architecture 2017
11422 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2009
7780 Downloads
|
|
|
 |
Wall Based Casework family with a charting carousel built into the wall. |
No Rating |
Product Version: Revit Architecture 2010
1104 Downloads
|
|
|
| |
I've been searching for a while but couldn't find this anywhere.....4 Types Included. Dimensions from website. Enjoy! |
No Rating |
Product Version: Revit Architecture 2008
3548 Downloads
|
|
|
 |
Kohler - K-2083 Chablis Wall-mount Lavatory |
|
Product Version: Unknown
12991 Downloads
|
|
|
 |
Scupper - Thru-Wall - Flexes with wall widths |
|
Product Version: Unknown
9847 Downloads
|
|
|
 |
Scupper - Thru-Wall - Adjusts with wall widths |
No Rating |
Product Version: Unknown
4011 Downloads
|
|
|
 |
Modeled in Revit LT 2024 for Malaysian Standards |
No Rating |
Product Version: Unknown
219 Downloads
|
|
|
 |
Revit 2019 |
No Rating |
Product Version: Unknown
2430 Downloads
|
|
|
| |
Including three different length from manufacture. Light source is not illuminate |
|
Product Version: Revit Architecture 2008
1659 Downloads
|
|
|
 |
Created in Revit MEP 2009, Greenheck series |
|
Product Version: Revit MEP 2009
14149 Downloads
|
|
|
 |
This is laminated white plastic frames and the materials are interchangable Revit 2021 |
No Rating |
Product Version: Unknown
1547 Downloads
|
|
|
 |
*Modified from previous content uploaded by vaamarieta.
There is a material for the fabric and also a material for the metal.
The curtain is stationary - you cannot close it.
The flanges are no longer adjusted away from the wall, but set to "0" to be flush with the wall. |
|
Product Version: Revit Architecture 2014
13476 Downloads
|
|
|
 |
its parametric and then we control the swing angle too and we can assign materials instantly |
|
Product Version: Revit Architecture 2017
2967 Downloads
|
|
|
 |
the leafs are polished titanium blue-green and gold wooden stem
|
No Rating |
Product Version: Unknown
3424 Downloads
|
|
|
 |
MIFAB® Series MC-56 wall mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron adjustable wall plate with mounting studs and fixture leveling hardware |
No Rating |
Product Version: Unknown
55 Downloads
|
|
|
 |
Available in multiple sizes, 27" to 48" widths. |
No Rating |
Product Version: Unknown
1323 Downloads
|
|
|
 |
Curved curtain panel for application in Revit curtain wall systems. Use the "Panel Centre Radius" instance paramter to suite the curve of your wall.
Please rate and comment. Cheers!! |
|
Product Version: Revit Architecture 2019
3073 Downloads
|
|
|
| |
Created in Revit MEP 2009, based on Greenheck SBE model |
No Rating |
Product Version: Revit MEP 2009
1285 Downloads
|
|
|
 |
projects diagonally, each arm holds two hats. Not parametric. |
No Rating |
Product Version: Revit Building 9.1
1129 Downloads
|
|
|
 |
Parametric Rectangular wall opening with 10 swapable Square fill Patterns in vertical Array and with /without sunshed, side fins & sill projection (if not req, simply set projection=0). 10 patterns to choose from. all parts of patterns are auto adjusted according to sq size 100mm to thousans of mm. Materials of diff patterns & Trim can be selected independently. Patterns can be off for clear Sq opening. O pattern is extra in front of main pattern, which can be off from visibility if not req. Opening with Pattern .-- By Er.L.J.Upadhyay +919919640999 |
No Rating |
Product Version: Revit Architecture 2018
224 Downloads
|
|
|
 |
Parameter for mounting height; Masked 2D images in plan and elevation |
|
Product Version: Revit Architecture 2009
6027 Downloads
|
|
|
 |
Revit 2014
Several preset sizes |
No Rating |
Product Version: Unknown
3792 Downloads
|
|
|
 |
Revit 2014
Several preset sizes |
No Rating |
Product Version: Unknown
5165 Downloads
|
|
|
| |
(corrected minor bug in elevation swing symbol) |
No Rating |
Product Version: Unknown
2368 Downloads
|
|
|
 |
Parametric width, height, thickness, length, and material
-BYU Revit Team |
|
Product Version: Unknown
2154 Downloads
|
|
|
Search