A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

No Rating

Product Version: Revit Architecture 2020

157 Downloads

A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

No Rating

Product Version: Revit Architecture 2020

100 Downloads

A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

No Rating

Product Version: Revit Architecture 2020

94 Downloads

A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

Product Version: Revit Architecture 2020

98 Downloads

A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

No Rating

Product Version: Revit Architecture 2020

117 Downloads

A Bike Storage Solution for High Density Areas

College campuses, condo buildings, public garages, and office complexes benefit greatly from a vertical bike storage system. Our wall mounted or circular racks are designed to hold one, two, three, four, six, or eight bicycles while saving space, clearing sidewalks, and increasing the amount of parking available. With their eye-catching design and sturdy construction, our circular models are a great addition to any public, commercial, or residential space.

No Rating

Product Version: Revit Architecture 2020

60 Downloads

ROCA

Application space: Bath

Reference: 5A9743C00

Index: Home > Products > Faucets > Shower columns > Shower column

Style: Loft

Description: The avant-garde design and the technology blend together to create strong and high-quality elements. This design is a timeless, singular and unalterable style proposal with a refined finish and the originality of its contours fill every space with elegance, precision and distinction.

Faucet: Included

Finish: Chrome

Handshower: Included

Installation type: Wall-mounted

Minimum water pressure required(bar): 2

Mixer type: Twin lever

Number of water outlets: 2, Shower flexible supply hose included 

Shower head function: Rain 

Suitable for: Shower

Product Version: Revit Architecture 2012

123253 Downloads

These files are based on 3Form Panels and 3Form Suspend Solutions Hardware. These files are meant to be used together and placed into the Project Environment. The Panel can be customized in width and height (Note that 3Form panels are typically 4'-0" wide by 8'-0" high maximum) and is placed by the centerline in height to coordinate with the suspension system parameters. The hardware suspension system has adjustments for overall height and the panel centerline height to move the clips up and down. The clips can be switched from center clips to end clips and the bottom attachment can be changed from floor mounted to wall mounted as well. NOTE: THIS DOWNLOAD ONLY DOWNLOADS THE SUSPENSION SYSTEM. THE PANEL IS LOCATED IN A SEPARATE DOWNLOAD.

No Rating

Product Version: Revit Architecture 2013

4026 Downloads

Simple Wall mounted extrusion

Modeled in Revit Arch 2012

No Rating

Product Version: Unknown

4538 Downloads

Logo Mexican Social Security Institute. (IMSS) logo based on wall. this file is not parametric

logotipo del instituto mexicano del seguro social. (IMSS) logotipo basado en muro. este archivo no es parametrico

No Rating

Product Version: Revit Architecture 2010

1507 Downloads

Festivus Pole:

Product Version: Revit MEP 2012

693 Downloads

MIFAB® Series R1940 downspout nozzle with nickel bronze body and threaded outlet, wall anchor flange with countersunk holes and decorative outlet nozzle.

No Rating

Product Version: Unknown

141 Downloads

Series LF215 Super Sensitive Low Pressure Regulators are designed to meet low pressure precision requirements. The high ratio of diaphragm to orifice provides excellent performance and stability at low reduced pressure. The Series LF215 is ideally suited for water requirements up to 2.5 gpm (9.5 lpm) due to its Lead Free* brass body and brass and stainless steel internal parts. The LF215 is also suitable for pressure supply to wall attachment fluidic devices. The LF215 features Lead Free* construction to comply with Lead Free* installation requirements.

No Rating

Product Version: Revit MEP 2014

99 Downloads

This is my first upload so please be gentel.  This is a simple family that allows you to place a shower partition with a curb on 4 sides and glass for the partition, in a room.  You can change a lot,

• Curb Heights - independent on all 4 sides


• Curb depth


• Overall Height


• Overall Width (you should be able to use align and lock to make it stretch.


• 2 - Panel or 3- Panel glass partition


• Each partition door has a 2D 45 degree rep for plan view.


• Each partition configuration allows you to put in two override dimensions that I will try to explain.


• Override Panel Width - If you need one of the panels to be say "6" use this to do that.  When this is set to 0 it should return to equal equal.


• Override Door Width - If you need the door to be a certain width say 30" enter it here.

This model is not foolproof, although I did do a few basics to keep people out of trouble, like a minimum door height and glass thickness.  But if you try to specify a panel override width and a door override width on the 2 panel with the curbs locked to the wall it will probably break.  However if you do that on the 3 panel, the 3rd panel will take up the slack.

Please leave your comments for me.  Thanks.

Product Version: Revit Architecture 2013

18438 Downloads

Fully parametric ADA Grab Bar. This Grab bar is a straight bar however attaches to the back and side wall.

Blocking lines have been added to the back and side walls. You can turn these lines off in the Visibility settings in the instances properties. They are also turned off in the cores visibility settings.  (Bobrick can custom make them. You can probably find other manufacturers as well) Hope it help 

revit 2015

No Rating

Product Version: Unknown

2389 Downloads

MIFAB® BIG-O Series HDPE rotational molded oil interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), internal air relief by-pass, adjustable oil draw-off assembly (1 1/2″) on each side, double vent connections (3″) on each side, sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20

No Rating

Product Version: Revit Architecture 2020

241 Downloads

Series 994 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of a stainless steel body construction with stainless steel internal parts. The bottom-mounted relief valve is located between the two check valves, making it suitable for installations against an outside wall. Series 994 has a compact design with a short lay length, ideal for retrofit installations. The 994 is designed for health hazard applications. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

238 Downloads

Lavadora extractora TSL-200 Braun, hospedada en pared, de paso a travez para uso hospitalario, para barrera sanitaria, para cuartos libres de contaminacion,  conexiones listas para vapor, agua fria y agua caliente, 90-105 kilogramos de capacidad

(Washer extractor TSL-200 Braun, hosted wall pass-travez for hospital use, for sanitary barrier for rooms free of contamination, lists connections for steam, hot water and cold water, capacity 90-105 kg ) 

Product Version: Revit MEP 2013

3926 Downloads

A lot like the parametric wall vent except face based if that's what you need, and improved. Now you can change the thickness, depth, and rotation of the louvres as well as how many louvres you want so you can get the right spacing. The vent dimensions, trim, and materials are also parametric. 

REVIT 2016

Product Version: Revit Architecture 2016

3615 Downloads

MIFAB® BIG MAX Series HDPE Rotational Molded Grease Interceptor. Unit shall include: 3/8” uniform wall thickness, deep seal trap covered by lid, internal air relief by-pass, adjustable lid system, stainless steel calibrated orifice plate (internal flow control), sample port access and 4″ no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101, CSA B481, A.S.M.E. A112.14.3 and listed with I.A.P.M.O. Big Max grease interceptors are also in compliance with International Plumbing Code (I.P.C.) / I.C.C. by I.A.P.M.O. For indoor/outdoor use.

No Rating

Product Version: Unknown

327 Downloads

Circular wall opening with Curve Pattern and with or without Trim By Er.L.J.Upadhyay +919919640999q

No Rating

Product Version: Revit Architecture 2016

71 Downloads

Inspired by JAMES termotanque linea cilíndrica cobre

Model Wall Based / basado en muro

Parametric 40, 60 & 80 Litres

Detail level: LOW - MEP level: LOW - Annotations: YES

No Rating

Product Version: Revit Architecture 2017

1870 Downloads

Circular wall opening with Curve Pattern and with or without Trim By Er.L.J.Upadhyay +919919640999q

No Rating

Product Version: Revit Architecture 2018

80 Downloads

Circular wall opening with OX+ Pattern and with or without  Trim By Er.L.J.Upadhyay +919919640999q

No Rating

Product Version: Revit Architecture 2016

33 Downloads

Circular wall opening with OX Pattern and with or without  SqTrim By Er.L.J.Upadhyay +919919640999q

No Rating

Product Version: Revit Architecture 2016

29 Downloads

Series ISCA-141 Industry Standard single vertical thin wall water closet carrier with epoxy coated cast iron fitting, no hub waste and vent connection (specify size) epoxy coated cast iron compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

61 Downloads

Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

42 Downloads

Series ISCA-151-L/R Industry Standard single vertical thin wall closet Carrier with offset epoxy coated cast iron fitting, 4 IN(102mm) no hub waste and 2 IN (51mm) no hub vent connections, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

54 Downloads

This window is fully parametric, as the title suggests. You can change the window's width, height, material and style. It supports single hung, hanging sliding, and casement styles. It comes with built in trim, shutters(toggleable), and transoms(toggleable); all of which are also parametric for both size and material. Transoms include both square and arched transoms.

Notes:

All materials are set to default grey material by default, with the exception of the glass material.

I havn't figured out how to toggle off openings when toggling off transoms, so put your wall material into the windows type to cover up the opening left behind.

You should be careful when adjusting arched transom sizes. Make sure that the size you are trying to create is even possible.

I didn't include inside trim because it was no use to me, comment if you'd like me to do so.

Any and all suggestions are appreciated.

If you plan on editing the window to suite your needs better, feel free to do so, but a word of caution; there are a lot of hidden aspects, and even the most subtle of changes can cause constraint errors. You might be better off leaving a suggestion.

Looking Forward To:

-Arched shutters to match arch transoms.

-Another shutter style.

-More trim options.

-User suggestions.

Product Version: Revit Architecture 2012

14513 Downloads

Series ISCA-141-D Industry Standard back-to-back vertical thin wall water closet carrier with epoxy coated cast iron fitting, 4 in(102mm) no hub waste and 2 in(51mm) or 4 in(102mm) vent connection, epoxy coated cast iron patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 500 lb. (227 kg.) static load. The closet carrier legs are embossed with incremental measurements markings, allowing contractors to easily adjust the height of the carrier to the most commonly used fixture requirements.

No Rating

Product Version: Revit MEP 2014

49 Downloads