 |
This is a straight stage curtain, opened to both sides. The height of the curtain, support rod, and wall opening are all adjustable. Depending on your particular conditions, it may require expanding the size of the curtains on either side. This will require a copy and paste of curtain (the curtain is in two pieces on each side already). Then use the join tool to join as many pieces as you need. Join the two sides separately to retain functionality. Do not group pieces - you will lose functionality. |
|
Product Version: Unknown
29748 Downloads
|
|
 |
Fully parametric RY (slotted C) section created in Revit Architecture 2012. The RY profile is an exterior wall stud for high thermal performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.
The family type is Structural Column.
For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology. |
No Rating |
Product Version: Revit Architecture 2012
2578 Downloads
|
|
|
 |
Kitchen Island utilizing 45 degree angles. This uses standard Revit cabinets.
42" Standard Bar Height.
Material Parameters exist for Countertop Material, Wall Material, and Brace Material.
Includes "Defy 600 Hob and under counter oven" uploaded by Cassie
Defy 600 Hob and under counter oven |
|
Product Version: Revit Architecture 2013
28391 Downloads
|
|
|
 |
A wall-embedded eye wash station with a safety shower mounted through the ceiling. The model is made to adjust in elevation for the eye wash station, shower head height, and ceiling height. The only caviat to this exact model is that the "Elevation" instance property needs to match the "Box Elevation" type property. |
No Rating |
Product Version: Revit Architecture 2017
1808 Downloads
|
|
|
 |
Filtrine Model FCC-107-14-HL fountain/chiller/purifier combination unit. Comes with a discrete and energy-saving chiller/purifier in the wall below. The chiller stores (2) gallons of chilled/purified Filtrine water (serving a population of 150). Matching key-lock, hinged access door provides chiller/purifier access and security. Architectural alternative to traditional Electric Water Cooler (EWC).
|
No Rating |
Product Version: Revit Architecture 2012
9667 Downloads
|
|
|
 |
Fully parametric RdBX section created in Revit Architecture 2012. The RdBX profile is a partition wall stud for high acoustic performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.
The family type is Detail Component.
For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology. |
No Rating |
Product Version: Revit Architecture 2012
1370 Downloads
|
|
|
 |
Wall based (H-ONT) Home - Optical Network Terminal by Chorus NZ for fibre to the home installation (FTTH)
4 data port, 2 telephone ports, 230 v power and earth/comms.
Materials for various LED lights, case and ports.
MEP connections: power, data and telephone
CBI (NZ) 78-11 cable communication systems
Revit 2018
|
|
Product Version: Unknown
1252 Downloads
|
|
|
 |
Concrete planter for site. Planter family has parameter options for planter width, planter depth, planter height, planter wall thickess, as well as parameter-based chamferred edges, and a parameter-based beveled reveal that can be adjusted in height.
Planter material and soil material are also both controlled with parameters. Soil can be offset from the top of planter.
Does NOT include plants-- you have to add as needed.
Keywords: Planter, site, concrete, garden, patio
File created in Revit 2019 |
|
Product Version: Unknown
46937 Downloads
|
|
|
 |
This is a parametric concrete trench with grill. All dimensions may be adjusted as desired (trench wall, length, depth, etc.). It is also face based, so it works on sloped floors. Hope it helps.
-------
Esta es una cuneta con rejilla parametrica. Todas las dimensiones son ajustables (profundidad, paredes, largo,ancho, etc.). La familia se adapta a la cara, asi que funciona también sobre pisos con pendiente.
|
|
Product Version: Revit Structure 2018
2710 Downloads
|
|
|
 |
Revit version 2019 Parametric pool Safety ladder Facebased
All relevant size are parametric
such as
- Width
- Pool Depth
- Pool base offset for Lowest Step
- Step Width
- Rail height
- Rail Extension
- Step Offset from Pool Wall
|
|
Product Version: Unknown
20747 Downloads
|
|
|
 |
EDIT: I did not realize when creating this upload that I had included the wrong file, see comments below. The correct file is located here: http://www.revitcity.com/downloads.php?action=view&object_id=13167
Non-Wall-based family so feel free to put it wherever you like.
There are several family types within the family for the various screen sizes (the ratios should stay the same so the images you use should all be the same length and width just different sizes of each).
Family sizes include: 32", 37", 42", 47", 52", 55", 60", 65", 72"
(This has always been a peeve of mine seeing the same family 10 times with each being a different size...just make different family types!)
Enjoy! Please rate/comment. Thanks! |
|
Product Version: Revit Architecture 2011
14113 Downloads
|
|
|
 |
Fully parametric line based glass railing.
Under type properties; Height, Thickness and Gap Thickness
Under instance properties; Yes/No Parameters for each end (I would zoom in and play with these. I programed them for ease of controlling where the panels ended. Ex; Draw the line to a wall or connect them in a corner and then use the different gaps to get the spacing right)
For a multi panel family go here |
|
Product Version: Revit Architecture 2014
15138 Downloads
|
|
|
 |
Fully parametric SKY (slotted U) section created in Revit Architecture 2012. The SKY profile is an exterior wall runner for high thermal performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.
The family type is Structural Framing.
For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology. |
|
Product Version: Revit Architecture 2012
2012 Downloads
|
|
|
 |
MIFAB® Series BIG- ___ -S HDPE rotational molded solids interceptor with solids holding capacity of ____ (indicate). Unit shall include: 3/8” uniform wall thickness, solids retention baffle with elevated 3” diameter passageway, adjustable lid system, sample port access and 4” no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. |
No Rating |
Product Version: Unknown
102 Downloads
|
|
|
 |
Minimalist generic round downlight/uplight/wall light
Why this lamp?
* mounts on all surfaces (ceilings, floors, walls, objects, etc.)
* optional lens and diffusor
* recess parametrizable (any distance from surface, incl. surface mounting)
* diameter and depth scalable in large ranges (depth down to 20 mm!)
* realistically rendering (metal reflector, dimmed diffusor when lamp off)* minimalist design
* all parameters thoroughly documented
* no junk parameters, well almost… :) |
|
Product Version: Revit Architecture 2020
5419 Downloads
|
|
|
 |
Series TCA-440 epoxy coated wall mounted concealed arm track lavatory carrier come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
56 Downloads
|
|
|
 |
Fully parametric RdBX section created in Revit Architecture 2012. The RdBX profile is a partition wall stud for high acoustic performance walls. It comes with a type catalogue txt file that defines the available types. The section is produced by Lindab in Sweden.
The family type is Structural Column.
For the complete free of charge LindabRevitLibrary, visit www.lindab.com/buildingtechnology. |
|
Product Version: Revit Architecture 2012
3807 Downloads
|
|
|
 |
Parametric Rectangular wall opening with 10 swapable Square fill Patterns in vertical & Horizontal Array and with /without sunshed, side fins & sill projection (if not req, simply set projection=0). 10 patterns to choose from. all parts of patterns are auto adjusted according to sq size 100mm to thousans of mm. Materials of diff patterns & Trim can be selected independently. Patterns can be off for clear Sq opening. O pattern is extra in front of main pattern, which can be off from visibility if not req. .-- By Er.L.J.Upadhyay +919919640999 |
No Rating |
Product Version: Revit Architecture 2018
309 Downloads
|
|
|
 |
Series TCA-450 epoxy coated wall mounted concealed arm track lavatory carrier for 27x20 lavatories come with heavy gauge steel cross plate and back-up mounting plates, sliding adjustable arm brackets, adjustable epoxy coated cast iron arms with leveling screws and basin locking device and plated hardware. |
No Rating |
Product Version: Revit MEP 2014
52 Downloads
|
|
|
 |
This is a profile for a corrugated mullion to make walls with corrugated metals.
To use the file load the profile into the project. Go to mullion and create a duplicate of the mullion and name it corrugated and select the profile you loaded in and set the material you want and click ok. Now Create a new curtain wall set the vertical grid to fixed distance and the spacing to 6-1/2" check the box for adjust for mullion size.
Set the horizonatl grid to none. Set the interior type vertical mullion to the mullion youy made. Now you are ready to draw currgated metal walls.
Renders perfectly and works for walls and roofs. |
|
Product Version: Unknown
9000 Downloads
|
|
|
 |
Fully parametric line based glass railing. Each panel is equal in size.
Under type properties; Height, Thickness and Gap Thickness
Under instance properties; Number of panels, Width of each panel, and Yes/No Parameters for each end (I would zoom in and play with these. I programed them for ease of controlling where the panels ended. Ex; Draw the line to a wall or connect them in a corner and then use the different gaps to get the spacing right)
For a single panel family go here |
|
Product Version: Revit Architecture 2014
26813 Downloads
|
|
|
 |
Ritorno is an elegantly designed and performance engineered indirect post top or wall mounted luminaire. Well suited for pedestrian scale site lighting applications, this fixture offers exceptional uniformity and glare control characteristics. The Ritorno utilizes standard medium base H.I.D. lamps up to 150 watts, 70 or 150 watt T6 Metal Halide, or QL Induction lamps up to 165 watts. Features include high efficiency output, sealed optics, marine grade stainless steel fasteners and a die cast aluminum lamp/ballast chamber with twist lock components for ease of servicing. Please take a look at RITORNO on the TELUS Corporation Project Page to the right. |
|
Product Version: Revit Architecture 2010
6460 Downloads
|
|
|
| |
Metal frame doors - detailed frames with stops. Standard 5 3/4" frame with adjustable frame depth. Can adjust setback from wall face - default 1/8". Rough openings will include frame width. Has lockset in elevation & 3D views. Door sizes 2'6", 2'8", 2'10", 3'0", & 4'0" x 7'0" - can add or adjust sizes. Default frame width 2", frame head 4" - can adjust sizes. |
No Rating |
Product Version: Revit Architecture 2010
1495 Downloads
|
|
|
 |
MIFAB® Series F1650-G flushing rim floor drain with white epoxy coated interior and exterior cast iron body, double wall deep seal trap with flushing connection, 3/4” (19) N.P.T. flushing connection in top assembly, anchor flange, membrane clamp, and stain finished (specify material finish) hinged grate and frame with stainless steel allen key vandal proof screws. |
No Rating |
Product Version: Unknown
180 Downloads
|
|
|
 |
Generic window to appear as functional as Curtainwall.
Based on Kawneen 451T
Storefront with Receiver
Adjust depth of wall placement similar to curtainwall with numeric imput. Works in brick, stucco, etc (Varying wall thickness)
Can change spandrel panel thickness and glazing type color with material palette. Use check bock to change panel from vision to spandrel in plan for thickness, but must use material to change actual material
Built in shim distance can be adjust to control rough opening shown on elevations and plan.
Receiver distance value is meant to be mullion plus additional receiver thickness, not total receiver thickess. |
No Rating |
Product Version: Revit Architecture 2012
1581 Downloads
|
|
|
 |
Generic window to appear as functional as Curtainwall.
Based on Kawneen 451T
Storefront with Receiver
Adjust depth of wall placement similar to curtainwall with numeric imput. Works in brick, stucco, etc (Varying wall thickness)
Can change spandrel panel thickness and glazing type color with material palette. Use check bock to change panel from vision to spandrel in plan for thickness, but must use material to change actual material
built in shim distance can be adjust to control rough opening shown on elevations and plan.
receiver distance value is meant to be mullion plus additional receiver thickness, not total receiver thickess. |
No Rating |
Product Version: Unknown
1569 Downloads
|
|
|
 |
This wall sconce is based on the Katie Small Acorn Sconce, designed by Thomas O'Brien for Visual Comfort (Circa Lighting). It has an acorn-shaped glass shade hanging gently from a metal backplate.
Materials are parametric. You can change the metal finish (instance) and shade finish (type).
Height: 13.4" Width: 6.5" Extension: 8.75" Backplate: 5.25" Round
I'm a student and created this sconce for a project. This is my first upload. |
|
Product Version: Revit Architecture 2017
8648 Downloads
|
|
|
 |
Added as sweep profile to your wall it will look like a metallic profilled face.
Revit version: 2017 |
No Rating |
Product Version: Unknown
953 Downloads
|
|
|
 |
This family is a simple parameter-controlled solid surface vanity (based on Swanstone dimensions).
Family includes both surface-mounted and wall-mounted faucents, which can be toggled on/off with Type Parameters. Faucet uses Symmons faucets, which can be switched out by editing the family if needed.
Vanity dimensions, backsplashes, faucets, meterials and basin offset can all be controlled with parameters.
Family does not include casework below.
Simple Look in plan/elevation works for a lot of our uses-- hopefully it'll help you too!
Thanks
Keywords: Counter, Sink, Faucet, Solid Surface, Vanity, Bathroom |
No Rating |
Product Version: Revit Architecture 2020
3256 Downloads
|
|
|
 |
These files are based on 3Form Panels and 3Form Suspend Solutions Hardware. These files are meant to be used together and placed into the Project Environment. The Panel can be customized in width and height (Note that 3Form panels are typically 4'-0" wide by 8'-0" high maximum) and is placed by the centerline in height to coordinate with the suspension system parameters. The hardware suspension system has adjustments for overall height and the panel centerline height to move the clips up and down. The clips can be switched from center clips to end clips and the bottom attachment can be changed from floor mounted to wall mounted as well. NOTE: THIS DOWNLOAD ONLY DOWNLOADS THE PANEL. THE SUSPENSION SYSTEM IS A SEPARATE DOWNLOAD. |
|
Product Version: Revit Architecture 2013
7787 Downloads
|
|
|
Search