BOBRICK B-43944 SEMI-RECESSED TOWEL DISPENSER & WASTE RECEPTACLE WITH CORRECT PROPORTIONS & MASK REGION TO COVER WALL PATTERNS IN SPACE BETWEEN UPPER AND LOWER SECTIONS.

Product Version: Revit Architecture 2009

3006 Downloads

Here is a parametric dock leveler based on this model: http://www.beacontechnology.com/docklevelers/edgeofdockleveler/

It is not wall based, so it can be put anywhere.

Product Version: Unknown

4796 Downloads

This door has a fully parametric sidelite; The door vision panel can be swiched on/off; The vision panel dims can be altered. The door frame size can be altered. The exterior and interior wall wrap can be altered. The door swing can have different angles.

http://revitize.blogspot.com/

Product Version: Revit Architecture 2009

3128 Downloads

Fantech Industries   (Australia and New Zealand).

Fantech 300 S bathroom exhaust fan - wall based

Curved face interior grille and flat faced exterior grille.

Material finish as per manufacturer low sheen white plastic

CBI (NZ) 76-11 General air exhaust systems

Revit 2018

No Rating

Product Version: Unknown

5770 Downloads

The Artec S6 melds high design with computer designed optics for a powerful indirect asymmetric distribution with peak candela below 130 degrees. This sophisticated extruded aluminum form provides the designer a signature that can be applied in individual or continuous rows, wall mounted or pendant supported. With the double fixture stem mounting option, two Artec S6 fixtures can be mounted together back to back giving the possibility for a powerful symmetrical design configuration.

Product Version: Revit Architecture 2010

5092 Downloads

Door for CURTAIN WALL PANELS. Model based on Windspec Inc's Series 5000. Comes with a few hardware options.

http://www.windspec.com/pro-entr-500.htm

Product Version: Revit Architecture 2012

31853 Downloads

Filtrine Model ES-2-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-100' via recirculating drinking water loop. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1476 Downloads

Filtrine Model ES-4-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-200' via recirculating drinking water loop. (4) Gal. storage tank. Serves a population of (200), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

752 Downloads

Filtrine Model ES-8-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (8) Gal. storage tank. Serves a population of (400), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

691 Downloads

This is a gate that has corrugated metal sheathing and is meant to be placed in a wall.  Width and height are adjustable in the Type Parameters.  (6', 8', 10', and 12' widths)  This is based on the family by Joseph2779, I've cleaned up the reference lines and parameters to be more intuative.  Added parameters for the hinge dimensions and to control the header height.

Product Version: Revit Architecture 2011

20509 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

27513 Downloads

Fully parametric wall based corner quoin. Control your base quoin height, reveal height and your multiple quoin height and reveal height and the number of quoins and the thickness of the quoin and reveal. You can even control the quoin width differently on both sides.

Product Version: Unknown

8277 Downloads

FIXED

Wall based, double door opening & shelf for a cool room display for a bottle shop or store.

Glass door with stainless steel frame, shelving and handle. 4 shelves that with heights that adjust automatically.

Height, width, offset from floor, shelf depth, handle height and handle size are all PARAMETRIC.

Product Version: Unknown

14531 Downloads

Posi-Joist parametric, standard PS10 251x96x46mm

posi-strutt, floor truss, easijoist, posijoist, mittal, wolf system, metal web joists, floor joists, joist, wood joist

parametric, minimum length between walls 692 mm

length between 693 and 1292 mm overlapping web

length above 1292mm array divides length by 600mm

overlap over walls parameters 0mm-width of wall

No Rating

Product Version: Revit Architecture 2020

350 Downloads

Parametric Water Tank on 2 side support mostly constructed on mumty roof. Internal size, wall thickness, floor & tank roof thickness, materials can be set manually. Tank can be raised above the roof. Manhole covers not provided . Lallan Ji, Varanasi

No Rating

Product Version: Revit Architecture 2015

512 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

17874 Downloads

MIFAB® Series R1960 fabricated Type 304 stainless steel downspout nozzle with hinged perforated bird screen cover in standard and flush models (Suffix -F). Are made to receive PVC, ABS or cast iron pipe inside the “A” dimension. The R1960 models “sleeve over the pipe sticking out of the wall. The R1960-F models sleeve over the pipe and are flush with the wall.

No Rating

Product Version: Unknown

261 Downloads

This is a gate that has corrugated metal sheathing and is meant to be placed in a wall.  Width and height are adjustable in the Type Parameters.  (6', 8', 10', and 12' widths)  This is based on the family by Joseph2779, I've cleaned up the reference lines and parameters to be more intuative.  Added parameters for the hinge dimensions and to control the header height.

Product Version: Revit Architecture 2011

13087 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

18417 Downloads

Product Version: Revit Architecture 2011

20794 Downloads

Posi-Joist parametric, standard PS10 251x96x46mm

posi-strutt, floor truss, easijoist, posijoist, mittal, wolf system, metal web joists, floor joists, joist, wood joist

parametric, minimum length between walls 692 mm

length between 693 and 1292 mm overlapping web

length above 1292mm array divides length by 600mm

overlap over walls parameters 0mm-width of wall

Product Version: Unknown

813 Downloads

Wall Based Single Standpipe Connection

No Rating

Product Version: Revit Structure 2008

1764 Downloads

This default window set up with different type of brick sill where you can choose which one and you can make a double hung or sliding window infill with glass. also you can close gap the brick sill using stud wall to 1mm. It will save you time set up the brick sill. Make sure save as before you change the type of window. This is default only window.

Product Version: Unknown

34323 Downloads

.pat file for Board and Batten wall pattern (model patern).

The spacing in this file is set at 12".  If you want to increase the spacing, just edit the .pat file in Notepad and change the 12s to whatever you want the spacing to be.  Credit Robert Cloward for the original code.

Product Version: Unknown

1012 Downloads

A wall mounted barrier free door operator push button (Round)

Product Version: Revit Architecture 2012

10671 Downloads

A wall based barrier free door operator push button (Rectangular)

Product Version: Revit Architecture 2012

4885 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs.

ELIMINATES THE NEED FOR DOZENS OF DOORS!

Features:
Frame automatically adjusts to wall thickness
Adjustable door swing angle
Adjustable door thickness
Adjustable width / height
width adjustments can be done with the align tool!
width & height show up on schedule
All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

14207 Downloads

A great door for space planning, early design, existing conditions, & tracing 2D CAD dwgs. ELIMINATES THE NEED FOR DOZENS OF DOORS! Features: Frame automatically adjusts to wall thickness Adjustable door swing angle Adjustable door thickness Adjustable width / height width adjustments can be done with the align tool! width & height show up on schedule All parameters are "instance parameters" which cuts down on the need to have dozens of doors in your project.

Product Version: Unknown

12958 Downloads

Afternoon ladies and gents......

Its been a few days since my last upload but i thought whats the heck, i'll treat you all.

Here we have a nice modern light chandelier. As with all my families i've added material parameters for the bulb, main material and glass shade.

I've also added a ceiling drop dimension parameter which is an instant parameter so you can have the same family in one model but at different heights.

THIS IS A FACE BASED FAMILY, SO TO LOAD ONTO A CEILING, OPEN UP THE CEILING LAYOUT AND LOAD ON FACE.

alot of people keep saying it only loads onto wall, no it doesnt.

Product Version: Revit MEP 2014

20422 Downloads

Price Industries Max Security Bar Grille

Security bar grilles restrict access and allow airflow between secure and non-secured areas. Ideal for maximum security applications, security bar grilles feature all-welded construction and are mounted to the wall using a welded frame with optional mounting flanges.

No Rating

Product Version: Revit MEP 2020

161 Downloads