'Face' based dry erase board.  I chose face based over 'wall' because someone might want to put this item onto a furniture system item, etc..

No Rating

Product Version: Revit Architecture 2008

5193 Downloads

Stone finnish exterior drinking fountain, Standard and ADA, Freeze Resistant box. Wall thickness editable

No Rating

Product Version: Revit MEP 2013

4870 Downloads

Wall base grab bar 24" long x 24" long x 60 degree angle

No Rating

Product Version: Revit Architecture 2011

807 Downloads

This cubicle family is flly parametric and sports options to include glass panels on the top of the wall. There is a dyncamic shelf that will resize the vertical dimension based on overall height and hide if the overall height is to shallow. The shelf has task lghting included with it. There also is two nested under desk file cabinets. All materials and dimensions are parametric. Family is RAC 2012.

Product Version: Unknown

30111 Downloads

Fully parametric set number of blocks heigh and number of blocks for the width Blocks size can also be changed. Reduce frame thickness to 1mm if you don't want to se the frame and set Frame material to wall material to hide the frame.

Product Version: Unknown

6731 Downloads

Double or single-sided wall-mount perpendicular exit sign with adjustable directional arrows both in model and symbol. Model hides in coarse view settings. Symbol shows in plan or RCP views. Symbol hides in fine view setting, or as a parameter. No actual light source. Best placed in elev or 3D views.

No Rating

Product Version: Revit Architecture 2011

8970 Downloads

Double or single-sided wall-mount parallel exit sign with adjustable directional arrows both in model and symbol. Model hides in coarse view settings. Symbol shows in plan or RCP views. Symbol hides in fine view setting, or as a parameter. No actual light source. Best placed in elev or 3D views.

No Rating

Product Version: Revit Architecture 2011

14741 Downloads

This was created to be used as frameless glass panel wall for a balcony but could also be used for a pool. It is fully parametric in all its dimentions and materials.

Created in Revit 2014

This is my first model / upload would love to know what you guys think.

Product Version: Revit Architecture 2014

28006 Downloads

This is a footing step for continuous wall foundations. It slopes at an angle of 2H to 1V. It is a structural foundations family.

Parameters: Width, Step Depth, thickness of top footing, thickness of bottom footing, bottom footing extension, structural material. You can also choose whether you want hidden lines to show up in plan view. (instance parameter.)

No Rating

Product Version: Revit Structure 2018

611 Downloads

This is a wall based oven tower with one extra large oven on the bottom, 2 smaller ones in the middle and shelves on the top, there are 2cversions closed and with the bottom open, the drawer on the bottom is part way open in both. the third file is the open tower with an added light built in as the Heating Coil thing you may have to play with the w/lm in the properties for rendering to look right it is a modern design (the top handles were done like they are intentionally)

Product Version: Unknown

23467 Downloads

Double door with HM frame.  The door width is adjustable; each leaf will be 1/2 the width.  The frame automatically adjusts to the wall width.

Product Version: Revit Building 9.1

4124 Downloads

Wall mounted Toilet Paper Dispenser, one with paper one without

No Rating

Product Version: Unknown

12844 Downloads

The height, radius, start angle, end angle, border wall height, and materials are adjustable. Adjusting the start and end angles can make the dome a full dome, half dome, quarter dome, etc.

Product Version: Revit Architecture 2011

14017 Downloads

Series CO-440-RD wall cleanout with two-piece expandable cleanout plug, stainless steel access cover, and vandal proof stainless steel screw.

No Rating

Product Version: Unknown

193 Downloads

Metal frame doors - detailed frames with stops.  Standard size frames with frame depth 4 3/4" to 8 3/4".  Can adjust setback from wall face - default 1/8".  Rough openings will include frame width.

No Rating

Product Version: Revit Architecture 2010

1454 Downloads

Series CO-450-RD epoxy coated cast iron wall cleanout with gasketed cover and no hub connection, stainless steel access cover, and vandal proof stainless steel screw.

No Rating

Product Version: Unknown

117 Downloads

This is a wall hosted, square dropin sink, countertop and faucet with MEP connections. The sink's L,W,D and center is adjustible. The countertop is also L,W,D adjustible and has independently adjustible radius corners.

Product Version: Revit MEP 2009

2982 Downloads

A domestic water cooler and filter/purifier.

It may be placed over the kitchen counter, or hanged on the wall.

Brand IBBL, model FR600, from Brazil.

Filtro e refrigerador de água doméstico IBBL FR600.

Pode ser apoiado em bancada, ou preso à parede.

Product Version: Revit Architecture 2017

2992 Downloads

BLITZ 4 WINDOWS

Art. S.4089W 1 MODULES COB 3000K  220-240Vac 1867lm 17.4W CRI 90 MacAdam step 3Rated luminaire luminous flux: 303lmRated input power: 18.1WLuminaire efficacy: 17lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCELuminaires come with toughened glass lenses already installed using the appropriate "lens-carrier slide". These may be substituted with coloured dichroic lenses. INSTALLATION AND MAINTENANCEA robust, die-cast aluminium cap is secured to the base with four stainless steel screws. WIRINGDouble cable entries with PG13,5 (Ø 7÷12 mm) cable glands. Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.9 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1060 Downloads

The Dryerbox 425 is the recessed dryer hose protection which allows dryer to be pushed back farther. 2x6 wall, upward ventilation.

https://dryerbox.com/model_DB-425.htm

No Rating

Product Version: Unknown

263 Downloads

The Dryerbox 350 is the recessed dryer hose protection which allows dryer to be pushed back farther. 2x4 wall, upward ventilation.

https://dryerbox.com/model_DB-350.htm

No Rating

Product Version: Unknown

216 Downloads

Noken - Porcelanosa Jam Sink 100049261

Wall-mounted Sink w/out faucet or sink-bend. Mounting height is parametric. Sink itself is not parametric.

Product Version: Unknown

20924 Downloads

Otis Gen2 Premier lift

Non parametric wall based lift modeled based on Otis 13 person 1000kg car.

has detail lines for floor plan and model for sections / elevations.

This is a NZ /Aus lift with metric units. Used in a 2 story Hospital building. (administration)

Included are the Otis pdfs. Fact sheet, Plans & builder guide.

Made by SDHB Revit Team

Product Version: Revit Architecture 2012

32276 Downloads

The Artec S6 melds high design with computer designed optics for a powerful indirect asymmetric distribution with peak candela below 130 degrees. This sophisticated extruded aluminum form provides the designer a signature that can be applied in individual or continuous rows, wall mounted or pendant supported. With the double fixture stem mounting option, two Artec S6 fixtures can be mounted together back to back giving the possibility for a powerful symmetrical design configuration.

No Rating

Product Version: Revit Architecture 2010

3758 Downloads

BLINKER

Art. S.6080W 1 MODULES COB 3000K  220-240Vac 2419lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 567lmRated input power: 23WLuminaire efficacy: 25lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEWall mounted luminaire. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 06LIGHTING PERFORMANCEReflector in 99.98% pure anodized aluminium . Acid-etched toughened glass 4 mm thick. LOR -- INSTALLATION AND MAINTENANCEThe recessing box is provided with support ribs that make it crush-proof during installation; the ribs are molded to the recessing box and cannot fall out before installation. The ribs must be removed before the installation of the luminaire. The lamp body is secured to the recessing box through stainless steel clips; the electric components are protected by a covering reflector that houses the light source. WIRINGSingle cable entry . Isolation: CLASS I . Available colours: Aluminium grey (cod.14). Weight: 3.28 Kg Glow Wire test: --LED circuit included.BLINKER REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

258 Downloads

Product Version: Revit Architecture 2011

26198 Downloads

Filtrine Model ES-6-RFC-IW - Remote in-wall recirculating chiller/purifier for serving chilled/purified water to multiple dispensers within 10'-400' via recirculating drinking water loop. (6) Gal. storage tank. Serves a population of (300), (assuming 1 qt./day/person typical usage).

Product Version: Revit Architecture 2012

1194 Downloads

Kohler - K-2226 Portrait Lavatory - wall mounted

No Rating

Product Version: Unknown

9221 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

644 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

356 Downloads