Filtrine Model ES-2-RF-IW - Remote in-wall chiller/purifier for serving chilled/purified water to (1) or (2) dispensers within 10-15'. (2) Gal. storage tank. Serves a population of (100), (assuming 1 qt./day/person typical usage).

No Rating

Product Version: Revit Architecture 2012

695 Downloads

Generic ADA flush valve toilet w/ 19" seat height, floor mounted with manual flush valve, wall hosted family

Product Version: Revit Architecture 2009

30719 Downloads

I modeled Erwin Hauer Screen Wall Continua Series Design 3, but rearreange panels pieces so its a "custom" design.

For full parameter descripcion see panel design 3. 

Product Version: Revit Architecture 2016

6567 Downloads

Adjustable Radius, Height, Border Wall Height, and Materials

Product Version: Revit Architecture 2011

744 Downloads

Double Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Revit Architecture 2016

8636 Downloads

Sleek linear light fixture that lines up parallel to the carriage of the stair along the wall. Metallic  frame made of aluminum and light casing composed of light-blue glass.

Visit my website at http://www.4u2cdesign.com

Product Version: Revit Architecture 2011

54341 Downloads

This window was used in a wall with brick veneer and is not adjustable.  There is an area of window left out to allow for a dbl door to be inserted.  This will allow for the window and door to be tagged seperately.

Product Version: Revit Architecture 2011

17480 Downloads

Garge Door with wood panneled effect and framing    

Door is actually a rectangle placed in a arched opening ...the frame around the edge is placed on a plane about 8" off the wall...i placed it like that to work with my house personally...family can be edited to delete the frame or move the ref. plane

Product Version: Revit Building 9

12294 Downloads

This is the main rotor unit of the HelixWind turbine I modeled.  Use this unit for your own stand application.  Image shows rotor family in a wall mounted stand.

Product Version: Revit Architecture 2008

923 Downloads

Z5420 floor mounted siphone jet service sink (27"Lx 20 1/2"Wx20"H).  Insert point at the wall finish

No Rating

Product Version: Revit Architecture 2009

1557 Downloads

The Dryerbox 3D is the recessed dryer hose protection which allows dryer to be pushed back farther. Downward venting, 2x4 wall.

https://dryerbox.com/model_DB-3D.htm

No Rating

Product Version: Unknown

340 Downloads

The Dryerbox 4D is the recessed dryer hose protection which allows dryer to be pushed back farther. 2x6 wall, downward ventilation.

https://dryerbox.com/model_DB-4D.htm

No Rating

Product Version: Unknown

262 Downloads

Photo frame for wall -needs a jpg decal for completion

Product Version: Unknown

405 Downloads

Single aluminum interior door and transom centered in wall with 1/4" glass

Product Version: Revit Architecture 2008

4588 Downloads

BVN AIR
AC REVERSIBLE WALL MOUNTED PLASTIC FAN
ÇİFT YÖNLÜ PLASTİK ASPİRATÖR

No Rating

Product Version: Revit Architecture 2016

3687 Downloads

Corner bath/spa in hob optional inset or offset from wall with size parameters. Part of my library, full library and template available with all rendering materials set up etc contact karinise@hotmail.com

No Rating

Product Version: Unknown

29093 Downloads

Downloaded exisiting arched window. it lacked several important things such as glazing and sills on the interior. I added them to suit my needs and changed the brick material to limestone to suit my project. Glazing is double panes with triple layer mullions.

I didn't change the heights, nor make it parametric. So it will still require a 13' ceiling or higher. sill will wrap any depth of wall.

No Rating

Product Version: Unknown

2163 Downloads

level based parametric masonry fireplace with optional trim surround, mantel and hearth.  Chimney top can be assigned to a referenced level in your project. Chimney and smoke chamber can be hidden to represent gas thru wall inserts.  Fireplace has internal lighting 'fixture' to provide 'glow' in renderings.

Product Version: Revit Architecture 2016

13119 Downloads

One kitchen cabinet family to make this kitchen. Copy the family side by side and choose from: a sink, an electric hob, 2 or 3 drawers, a door, etc... Family is in Dutch language. Entourage (fridge, bin, lighting, wall, windows, etc.) not included! Picture shown is an EXEMPLE rendering i made with this family. Not a perfect family, but hopefully useble :-)

Product Version: Unknown

62746 Downloads

Custom Window for Lodge project. Uneven Sash, with 3 muntins in upper sash. I was in a hurry so:

-Glass was not put in

-Muntins are not completely parametric

-Offset Center of Wall parameter will not work with negative values :(

This should get you started if you're wanting a double hung window.

No Rating

Product Version: Revit Architecture 2008

1458 Downloads

Single Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - my first upload so hope it works - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Unknown

9819 Downloads

Fully parametric ETFE panel modelled as a Curtain wall panel by pattern family. This panel works with 4 sided structures and has a parameter for controlling the 'bulge' of the pillow shape and material. Also, the pillow shape is hidden at coarse and medium detail level, so be sure to turn on FINE detail level to see it!

Product Version: Revit Architecture 2013

4021 Downloads

3 Panel Wooden Door with trim based on my office door. Door is Parametric  but is set up for 105 mm thick wall , would need a little editing for thicker walls.

Product Version: Revit Architecture 2010

27615 Downloads

Detail Component for Randall Brothers wood base #9601

Base is pictured as the tall piece against wall. 

No Rating

Product Version: Revit Building 9.1

3115 Downloads

Glass sliding door for interior applicaton. Door's height and length is fully adjustable, width is not easily adjustable. the door is 5" thick so works with standard interior wall width.

Product Version: Unknown

83604 Downloads

This is a high performance European style Passive House Window.  The size and a number of other aspects are parametric, including thickness of window buck, location of frame in the wall thickness, etc.  Modelled after windows such as Rehau Geneo, Optiwin, Zola, etc.  Meant for fairly thick walls.  Hope it works well for you.

No Rating

Product Version: Unknown

794 Downloads

It's adjustable for distance off wall, height, width, extension above top rung, and bracket spacing.  If you make it too short, you neeed to make the bracket spacing smaller as well, or it won't work.

I wanted one that would work for both elevator pits and roof access.  Could find one, so I made one.  My first parametric family.

Product Version: Revit Architecture 2015

10198 Downloads

This is a helix Wind turbine from HelixWind.com.  This is model S594 according to the spec sheet I modeled it from.  This particular model is meant to mount to horizontal planes such as a floor or roof.  Image shows wall mounted Turbine.  Modeled for Sebass.

Product Version: Revit Architecture 2008

2498 Downloads

Sanitary Seat Napkin dispenser - wall mounted

Product Version: Unknown

4684 Downloads

Generic electromagnetic door holder, wall based.

No Rating

Product Version: Revit Architecture 2014

410 Downloads