Series LF26A Lead Free* Small Pressure Regulators are used in small general purpose applications to regulate pressure in piping systems using water and No. 2 fuel oil. They have a Lead Free* brass body construction with NPT threaded female inlet and outlet connections, 1/4 in. two-way low-pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle adjustment. Options include Viton trim and slotted adjusting screw. Strainers are recommended. Series LF26A has an oversized orifice and is ideal for use on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. Maximum Working Pressure: 300psi (21 bar).

No Rating

Product Version: Revit MEP 2014

187 Downloads

Series LF263A Lead Free* Small Pressure Regulators are used in small general purpose applications to regulate pressure in piping systems using water and No. 2 fuel oil. They have a Lead Free* brass body construction with NPT threaded female inlet and outlet connections, 1/4 in. three-way low-pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle adjustment. Options include Viton trim and slotted adjusting screw. Strainers are recommended. Series LF263A has an oversized orifice and is ideal for use on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. Maximum Working Pressure: 300psi (21 bar).

No Rating

Product Version: Revit MEP 2014

122 Downloads

Series 994DCDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 994DCDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a stainless steel body, stainless steel internal parts, thermoplastic check valves and a bottom-mounted relief valve. Series 994DCDA is half the weight of competitive designs, and its short lay length makes installation and maintenance simple and easy. It is ideal for installation on fire protection systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar)

No Rating

Product Version: Revit MEP 2014

341 Downloads

MIFAB® Series MI-SD____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s).

Product Version: Unknown

215 Downloads

Series LF008PCQT Lead Free* Anti-Siphon, Spill-Resistant, Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage on indoor point-of-use applications. They have a Lead Free* cast copper silicon alloy body construction, thermoplastic check and float assembly valve, stainless steel springs, tee handles, and a molded diaphragm separating the air inlet from the potable water supply to prevent spillage. Series LF008PCQT is ideal for indoor use on machines or equipment in general plumbing applications. Maximum Working Pressure: 150psi (10.34 bar), Minimum Working Pressure: 8psi (55.2 kPa).

No Rating

Product Version: Revit MEP 2014

185 Downloads

Series U009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction with a unique swivel union, two in-line independently operating check valves, a removable stainless-steel relief valve with captured springs and replaceable seat discs, four ball valve test cocks, and an air gap drain fitting. Their compact and space-saving design facilitates easy assembly and maintenance access. They are ideal for protection at health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

241 Downloads

AGRV_FURN_Bar3_吧檯組3

StandAlone Bar Table & Stool (3seat)

Metric BarTableSet with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

2893 Downloads

AGRV_FURN_Bar4_吧檯組4

StandAlone Bar Table & Stool (4seat)

Metric BarTableSet with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

Product Version: Revit Architecture 2018

4278 Downloads

AGRV_FURN_Bar4B_吧檯組4B

StandAlone Bar Table & Stool (4seat)

Metric BarTableSet with DIM & Material parameters and dimension Guide 

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

2443 Downloads

Here is a file to have Door/Window/Gate schedule and associated door panels. the window was using door family template, the chain link fence was using curtain wall with gate.

Change Door tags:1. While placing the door, click “Tags” in the Option Bar,2. In “Loaded Tags And Symbols”, under “Doors” Category, click “Loaded Tags”, then, switch between “Door Tag-AAA”, and “Wdw Tag-AAA”.

To link parameters from a nested family to the host family you will need to do the following.1. Open the host family with the nested inserted.2. Click on the nested family.3. Click “Edit Type” in the Properties.4. The “Type Properties” window will be shown.5. Click the parameter that you want to associate with other parameter.6. Click the little button at the far right of the parameter line you want to change7. Select parameter out of list or click add parameter and recreate the parameter.When the parameter is linked there will be an (=) sign on the little button.

Make sure that the associated parameters are in the same Group, which means Text, or Dimension. If the parameter is a length, then it needs to have a value instead of 0’ 0”.

No Rating

Product Version: Revit Architecture 2015

1750 Downloads

Series SS009 Stainless Steel Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. They have a stainless steel body construction, two stainless steel check valves, stainless steel check seats, hydraulically-operated relief valve, and stainless steel, vandal-resistant ball valve test cocks. Series SS009 is ideal in applications where the downstream liquid is of a composition where bronze material would be damaged or if it is desirable to eliminate trace elements of lead and copper. Series SS009 is ideal in industrial or plant applications, in medical/diagnostic equipment, in reverse osmosis systems, and for other health hazard piping systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar)

No Rating

Product Version: Revit MEP 2014

476 Downloads

AGRV_GENM-SPCQ_ParkingBarrierA_車道柵欄機A

StandAlone ParkingBarrier (Single Barrier bar)

Metric ParkingBarrier with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

382 Downloads

AGRV_GENM-SPCQ_ParkingBarrierA_車道柵欄機A

StandAlone ParkingBarrier (Single Barrier bar)

Metric ParkingBarrier with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

164 Downloads

MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of _____(indicate). Unit shall include: ½”(13) thick fixed primary straining baffle with 1/4” (6.4) holes and secondary ½”(13) thick removable straining baffle with 1/4” (6.4) holes, removable cross bar , securing bolt(s), stainless steel calibrated orfice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

45 Downloads

AGRV_GENM-SPCQ_ParkingBarrierB_車道柵欄機B

StandAlone ParkingBarrier (Foldable Barrier bar)

Metric ParkingBarrier with DIM & Material parameters and dimension Guide 

No Rating

Product Version: Revit Architecture 2018

245 Downloads

Series 957RPDA, 957NRPDDA, 957ZRPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 957RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a compact, stainless steel body with stainless steel internal parts, two check valves, a pressure-differential relief valve, shutoff valves, torsion spring checks and relief valve, and bronze, nickel-plated test cocks. Series 957RPDA, 957NRPDDA, 957ZRPDA is 70% lighter than traditional designs and is ideal for health hazard cross-connection, such as on fire sprinkler systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

355 Downloads

Series LFN223B, LFN223BS Lead Free* High Capacity Water Pressure Reducing Valves are used in commercial, industrial, and institutional applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a triple-coated corrosion preventative Lead Free* cast copper silicon alloy body construction, an enlarged diaphragm, spring cage and seat orifice for super capacity performance, sealed spring cage for waterworks pit installations and thermal expansion bypass. Available with NPT threaded female inlet x NPT threaded female outlet with (LFN223BS) or without (LFN223B) strainer. Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting: 50psi (345 kPa).

No Rating

Product Version: Revit MEP 2014

131 Downloads

Series LFU009 Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. The swivel feature in the series allows for it to be used in a variety of installations, including the prevention of health hazard cross-connections in piping systems or for containment at the service line entrance. This series features two in-line, independent check valves, captured springs, and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 1/2in. - 1in. (15 - 25mm) shutoffs have tee handles. It has cast copper silicon alloy body construction for durability. The LFU009 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

174 Downloads

MIFAB® Series XL-MI-G ____ sanitary, acid resistant, epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable (fixed for XL-MI-G-10/-11) baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orfice plate, internal air relief by-pass, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

340 Downloads

MIFAB® Series MI-FISH sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale interceptor. Unit shall include: Sediment bucket with perforated baffle near inlet (3/8” (9) holes), primary removable straining baffle (1/2” (13) thick with 1/4” (6) holes), secondary removable straining baffle (1/2” (13) thick with 1/8” (3) holes), securing bolt(s), removable cross bar, stainless steel calibrated orfice plate and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

111 Downloads

Series LF800M4FR Lead Free* Freeze Resistant Pressure Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. It consists of Lead Free* Cast Copper Silicon Alloy body construction, silicone rubber check valve disc, plastic check valve seat, stainless steel springs, a bonnet with silicone rubber O-ring seal, a lightweight plastic disc float, a built-in relief valve to protect the internal components and the body from freezing, tee handle or lever handle shutoffs, and test cocks for winterization draining. Series LF800M4FR is ideal in continuous pressure health hazard applications where exposure to sudden freezing conditions such as on irrigation systems and industrial process water systems can occur. Maximum Pressure: 150psi (10.3 bar), Minimum Pressure: 15psi (55kPa).

No Rating

Product Version: Revit MEP 2014

213 Downloads

MIFAB® Series MI-O-HU ____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage.

No Rating

Product Version: Unknown

279 Downloads

MIFAB Series MI-SAND____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor.

Unit shall include: removable cross bar, four 3” (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

104 Downloads

MIFAB® Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include:

sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated non skid rectangular lid.

No Rating

Product Version: Unknown

71 Downloads

MIFAB® Series MI-E-O____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.

Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s).

No Rating

Product Version: Unknown

50 Downloads

MIFAB® Series MI-E-O____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.

Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s).

No Rating

Product Version: Unknown

46 Downloads

MIFAB® Series MI-E-O-HU__ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.

Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s).

Product Version: Unknown

122 Downloads

MIFAB Series MI-G-L ____ sanitary, acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:

removable baffle assembly and cross bar, securing bolt(s) external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid. MI-G-L-20 and MI-G-L-35 models shall be tested and certified to the ASME Standard A112.14.3 and PDI G-101.

No Rating

Product Version: Unknown

156 Downloads

MIFAB® Series MI-G-SDH ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal steel cone, flexible drawoff hose and cap, hose clamp, line shut off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

154 Downloads

Series LF1170, LFL1170 Lead Free* Hot Water Temperature Control Valves are specifically designed for mixing hot and cold water on hot water supply systems. They can be used for a variety of applications to reduce the temperature of the hot water from the system, and are ideal for radiant heat applications. This series features a "double throttling" design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber. The LF1170 can be set to any temperature between 90°F and 160°F (60°F and 120°F for model LFL1170-M2) with flow rates as low as 0.5 gpm and as high as 23 gpm. The superior flow characteristics of this valve provide accurate temperature control to the requirements of ASSE 1017 across the rated flow range. These valves also provide additional safety as they restrict mixed water out to a drip upon loss of cold water supply to the valve. As an added feature, the LF1170, LFL1170 series incorporates integral check valves and filter washers in both the hot and cold water inlets to protect against cross flow. Available with threaded (-UT), solder (-US), PEX Quick-Connect (-QC) or CPVC connections. Maximum Pressure: 150psi (10 bar). Consisting of Lead Free* cast copper silicon alloy body construction.

Product Version: Revit MEP 2014

596 Downloads