Series LF40L, LF40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LF40L has a short thermostat for installation directly in available tank tapings. Model LF40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series LF40L, LF40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

173 Downloads

Series LFLL40XL, LFLLL40XL Extended Shank Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* cast copper silicon alloy with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LFLL40XL is available in sizes 3/4 and 1 in. (20 and 25mm). Model LFLLL40XL is available in size 3/4 (20mm) with an extra long extended shank. Series LFLL40L, LFLLL40XL valves are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

89 Downloads

8 in 1 Revit family to save you time from downloading each of the equiptment. Pommel Horse and Parallel Bars has landing mat which can be turn off.

Equipment are Ring Tower, Uneven Bars, Single Bar, Vault, Inground Trampoline, Pommel Horse, Parallel Bars and Bnlance Beam.

Enjoy.

Product Version: Revit Architecture 2018

6995 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

7511 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

6073 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

9640 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

8910 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

5530 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

12120 Downloads

Modern Shower rose, adjustable in height, bar length & tap position, based on Kohler design.  Not totally squared away may have problems with height position

No Rating

Product Version: Revit Architecture 2009

2839 Downloads

Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL Lead Free* Extended Shank Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. They feature an extended shank for installation on water heaters with extra thick insulation as well as a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Model LFSL100XL is suitable for water heaters with up to 1-3/4 in. (45mm) of insulation. Model LFL100XL is suitable for water heaters with up to 2 in. (51mm) of insulation. Model LFLL100XL is suitable for water heaters with up to 2-1/2 in. (64mm) of insulation. Model LFLLL100XL is suitable for water heaters with up to 3 in. (76mm) of insulation. Series LFSL100XL, LFL100XL, LFLL100XL and LFLLL100XL are ASME rated and CSA listed. Temperature Relief: 210 degreeF (99 degreeC). Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).

No Rating

Product Version: Revit MEP 2014

90 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

7537 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

10758 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

6806 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

Product Version: Revit Architecture 2015

11889 Downloads

Power Tower Pull up Station based on the dimensions of the X-Factor Pull Up Station Chin Up and Dip with Sit Up Bar VKR. 5 Adjustable height setting in both Inches and based on the settings of the original pull up station.

No Materials

Product Version: Revit Architecture 2020

4075 Downloads

Our Madison range comes with a high back and upholstered arms to ensure maximum comfort. Showwood feet available in Bleached Beech, Cherry, Natural Beech, Oak, Walnut and Wenge stains as standard, plus customers own stains.

Reversible cushions ensure even wear and prolong fabric life.Polished Timber Feet (Front) plus Castors (Rear) to aid manoeuvrability.The Extreme version is the same domestic looking settee with high back and elegantly curved arms to ensure maximum comfort yet constructed to benefit from all the safety features required for challenging environments. It is ergonomically designed to guarantee good posture. It has a reinforced frame with plywood skinning and plywood under bottom to add extra weight.Anti-tamper security fixings such as no visible staples and use of non-retractable screws.Metal back tacking has been removed - slip stitching where requiredExtreme feet fitted with non-retractable bolts and removable cushions for easy cleaning.Reversible cushions prolong the life of the upholsteryZipper tag over sewn.

(Created in Revit 2014)

Product Version: Unknown

10167 Downloads

Wood dining room set with adjustable heights.  Preset types with 30" standard height, 36" counter height, and 42" bar height.  Materials are also adjustable.

Enjoy!

Product Version: Revit Architecture 2014

18883 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.  Designed for a home work shop.

Product Version: Revit Architecture 2015

21088 Downloads

Under "Woodworking Shop" includes wood lathe, table saw, jointer, planer, band saw, jig saw, drill press, bench top grinder, spindle & drum sander, router & miter saw, work bench, lumber rack, and bar clamp rack.

No Rating

Product Version: Revit Architecture 2015

6336 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

644 Downloads

widths= 6, 9, 12, 15, 24, 25 inches x 1.5" thick

Included all fittings and harware for the following in model:

90 degree end clamps

Rubber End Caps

Closing Bar

Wall mount end (RWSK)

splice kit

119.5" long  model displays warning if length is greater than this.  Yuse splice to sdd sections.  Each section is adjustable in length not to exceed 119.5"

No Rating

Product Version: Revit Architecture 2017

356 Downloads

This is my most ambitious family yet.

This ADA-compliant countertop and sink(s) was made to solve frustrations in our office that there were no functional and flexibile families to meet generic bathroom sink and countertop needs.

This accomplishes that, I feel.

User can specify length of the countertop, materials, and up to four sinks or as few as zero.  

 Sink locations space automatically to fill the surface, depending on how many sinks are visible.  If for some reason you'd like the sinks to be asymmetric, a "shift sink" field is avaiable in the properties bar.

Product Version: Revit Architecture 2014

37452 Downloads

Kitchen Island utilizing 45 degree angles. This uses standard Revit cabinets.

42" Standard Bar Height.

Material Parameters exist for Countertop Material, Wall Material, and Brace Material.

Includes "Defy 600 Hob and under counter oven" uploaded by Cassie

Defy 600 Hob and under counter oven

Product Version: Revit Architecture 2013

28393 Downloads

Shuffleboard table, 10'-4" length (8'-8" playing surface length).  Parameters control materials and puck on/off visibility.

Dimensions are not parameter controlled.  Based on dimensions of Indio metal outdoor shuffleboard table from Pottery Barn. Felt color is blue.  

https://www.potterybarn.com/products/indio-metal-shuffleboard-slate-mp/?pkey=cgame-tables

Keywords: Shuffleboard, puck, bar game, game

No Rating

Product Version: Revit Architecture 2020

3161 Downloads

A standard size pool table (8' standard size = 44"w x 88"l playing surface).

The materials can be controlled by parameters.  Visibility of the pool cue and balls can be controlled by parameters as well.  A 3'-6" play area clearance is built in as well, and can also be controlled for visibility.

The model is not currently set for the table size to be parameter controlled, and if you adjust the size it'll get wonky. 

BUT!  If you're looking for that standard size pool table, this could be the one for you.  I'll try to upload a better version later with adjustable size parameters when I get the chance to update this one.  

Pool table, snooker table, bar games, billiard, billiards

Product Version: Unknown

21810 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a bronze (1/2 to 2 in) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

416 Downloads

Series 007 Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. They have a bronze (1/2 to 2 in.) body construction that is easy to maintain and service. Series 007 is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

247 Downloads

Manufacturer: Ametco Manufacturing Corporation.URL: www.ametco.com 

Fully parametric V-blades louver. Adjustable Width, Number of Blades, automaticaly calculated Hight. According to manufacturer blade design, 15 types of color, textured, 100% and 80% visual screening. Family type catalog included.

The fixed louver Venetian Design allows up to 100% visual screening in any direction and still allows airflow for ventilation. The Venetian Design has V-shaped extruded aluminum main bar welded to extruded aluminum framing bars. After fabrication Venetian design is polyester powder coated for long lasting maintains free beauty.

Product Version: Revit Architecture 2012

6111 Downloads

Series LF4001E Lead Free* Dielectric Unions feature a female iron pipe thread to solder connection. Compliant to American Society of Sanitary Engineering ASSE Standard 1079-2005. These unions are designed to be installed between pipe made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. Maximum Pressure: 250psi (17.2 bar). Maximum Temperature: 180°F (82°C)

No Rating

Product Version: Revit MEP 2014

100 Downloads